Audiolab 6000A

Audiolab 6000A Stereo Geïntegreerde Amplewendiger gebruikershandleiding

Model: 6000A

Inleiding

Dankie vir die aankoopasing the Audiolab 6000A Stereo Integrated Amplifier. This manual provides essential information for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity. The Audiolab 6000A is a versatile 100-watt integrated amplifier with built-in Bluetooth connectivity and an ESS 9018K2M DAC, offering a high-quality audio experience.

Veiligheidsinligting

Kragtoevoer: Verseker die ampDie verligter is gekoppel aan 'n kragtoevoer wat ooreenstem met die volumetage gespesifiseer op die eenheid.
Ventilasie: Moenie ventilasie-openinge blokkeer nie. Laat voldoende spasie rondom die eenheid toe vir behoorlike lugvloei om oorverhitting te voorkom.
Vog: Keep the unit away from water, moisture, and high humidity.
Skoonmaak: Ontkoppel van die krag voor skoonmaak. Gebruik 'n sagte, droë lap. Moenie vloeibare of aërosol skoonmaakmiddels gebruik nie.
Diens: Verwys alle diens na gekwalifiseerde dienspersoneel. Moenie probeer om die eenheid self oop te maak of te herstel nie.
Plasing: Plaas die eenheid op 'n stabiele, gelyk oppervlak. Vermy dit om dit naby hittebronne of in direkte sonlig te plaas.

Wat is in die boks

Maak asseblief seker dat al die items wat hieronder gelys word, teenwoordig is tydens uitpak:

Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Silver
Kragkabel
Gebruikershandleiding (hierdie dokument)

Produk verbyview

Voorpaneel

Figuur 1: Voorkant view of the Audiolab 6000A integrated amplifier, showing the display, control knobs for selection, mode, and volume, and power button.

SEL (Selection) Knob: Used to navigate menus and select inputs.
MODUS Knop: Used to switch between different operating modes.
Vertoon skerm: Shows current input, volume level, and operational status.
VOL (Volume) Knob: Pas die uitsetvolume aan.
Koptelefoon uitset: 6.35 mm-aansluiting om oorfone aan te sluit.
IR -ontvanger: Vir afstandbeheerseine.
Kragknoppie: Skakel die eenheid aan/af of plaas dit in bystandmodus.

Agterpaneel

Figuur 2: Agter view of the Audiolab 6000A integrated amplifier, showing various input and output terminals, power inlet, and antenna.

Power Inlet & Fuse: Connects to AC power. Includes a fuse holder.
Krag skakelaar: Hoofkragskakelaar.
Luidsprekeruitsette: Binding posts for connecting left and right speakers.
Digitale insette (opties/koaksiaal): For connecting digital audio sources.
USB-invoer: For firmware updates (not for audio playback).
Bluetooth-antenne: Vir draadlose Bluetooth-konnektiwiteit.
Analog Inputs (AUX1, AUX2, AUX3): RCA inputs for analog audio sources.
Fono-invoer: Dedicated RCA input for turntables (MM).
Vooruit: RCA outputs for connecting to an external power amplewendiger.

Opstelling

1. plasing

Place the Audiolab 6000A on a flat, stable surface, ensuring adequate ventilation around the unit. Avoid direct sunlight, heat sources, and areas with high humidity.

2. Luidsprekers koppel

Connect your passive speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels. Use high-quality speaker cables for optimal sound.

3. Verbind oudiobronne

Analog Sources: Connect CD players, tuners, or other analog devices to the AUX1, AUX2, or AUX3 RCA inputs.
draaitafel: Connect a turntable with a Moving Magnet (MM) cartridge to the PHONO input.
Digital Sources: Connect digital audio sources like TVs, game consoles, or media streamers to the OPT1, OPT2 (Optical) or COAX1, COAX2 (Coaxial) inputs.

4. Kragverbinding

Once all audio connections are made, connect the supplied power cable to the AC inlet on the rear panel and then to a suitable wall outlet. Ensure the main power switch on the rear panel is in the OFF position before connecting.

Bedryf

1. Skakel aan/af

First, ensure the main power switch on the rear panel is in the ON position. Then, press the front panel Power button to turn the unit on or put it into standby mode.

2. Invoerkeuse

Draai die SEL knob on the front panel to cycle through available input sources (e.g., AUX1, OPT1, Bluetooth, Phono). The selected input will be displayed on the screen.

3. Volumebeheer

Draai die VOL knob clockwise to increase volume and counter-clockwise to decrease volume. The current volume level will be shown on the display.

4. Bedryfswyses

The Audiolab 6000A features three distinct operating modes, selectable via the MODUS knop:

Integrated Mode: Standaard amplifier operation, where the pre-ampverligter en krag amplifier sections work together.
Pre-Power Mode: Die pre-amplifier section is bypassed, allowing the 6000A to function purely as a power amplifier. Useful when connecting an external pre-amplewendiger.
Voor-Ampverligter modus: Die krag amplifier section is bypassed, allowing the 6000A to function purely as a pre-amplifier. Useful when connecting an external power amplifier via the Pre-Out terminals.

5. Bluetooth-koppeling

Om 'n Bluetooth-toestel te koppel:

Select the Bluetooth input using the SEL knop.
The display will show "PAIRING" or similar, indicating it's ready to connect.
On your mobile device, enable Bluetooth and search for "Audiolab 6000A".
Kies die amplifier from the list to complete pairing. Once connected, the display will confirm.

6. DAC Functionality

The Audiolab 6000A incorporates an ESS 9018K2M DAC, allowing for high-resolution digital audio playback. Connect your digital sources (e.g., CD transport, network streamer) to the optical or coaxial digital inputs to utilize the internal DAC.

Onderhoud

Skoonmaak: Gebruik 'n sagte, droë, pluisvrye lap om die buitekant van die ampMoenie skuurmiddels, wasse of oplosmiddels gebruik nie.
Ventilasie: Periodically check that the ventilation slots are clear of dust and debris.
Berging: Indien die eenheid vir 'n lang tydperk gestoor word, ontkoppel dit van die kragtoevoer en bêre dit op 'n koel, droë plek.

Probleemoplossing

Probleem	Moontlike oorsaak	Oplossing
Geen krag nie	Power cable not connected; Rear power switch off; Blown fuse	Check power cable connection; Ensure rear power switch is ON; Replace fuse (refer to safety info)
Geen klank nie	Incorrect input selected; Speaker cables loose/incorrectly connected; Volume too low; Mute engaged	Select correct input; Check speaker connections and polarity; Increase volume; Check if mute is active
Bluetooth saambind nie	Amplifier not in pairing mode; Device too far; Interference	Ensure Bluetooth input is selected; Move device closer; Reduce interference from other wireless devices
Verwronge klank	Source signal too high; Speaker impedance mismatch; Damaged cables	Verminder bronvolume; Maak seker dat luidsprekers ooreenstem amplifier impedance; Check/replace cables

Spesifikasies

Model: Audiolab 6000A
Uitset krag: 50W x 2 into 8 Ohms
DAC: ESS 9018K2M
Verbinding: Bluetooth geaktiveer
Bedryfsmodusse: Integrated, Pre-Power, Pre-Amplewendiger
Produk afmetings: 13 x 17.5 x 3.15 duim
Gewig: 21.6 pond
Voltage: 100 Volt
Minimum Voorraad Voltage: 15 Volt (DC)

Waarborg en Ondersteuning

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Audiolab webwebwerf. Bewaar u bewys van aankoop vir enige waarborgeise.

Vervaardiger: Oudiolab