Behringer NX3000D Power Amplewendiger gebruikershandleiding

1. Inleiding

This manual provides essential information for the safe and efficient operation of your Behringer NX3000D Ultra-Lightweight 3000 Watt Class-D Power Amplifier. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

Sleutel kenmerke:

• Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (Bridge mode).
• Weighs less than 7.9 lbs / 3.6 kg, ensuring portability.
• Features revolutionary cool-running high-density Class-D technology for ultimate reliability and near-zero thermal buildup.
• Toegerus met 'n ultra-doeltreffende skakelmodus-kragbron vir geraasvrye klank, superieure oorgangsrespons en lae kragverbruik.
• High-performance DSP and 24-bit/96 kHz converters provide ultimate signal integrity and extreme dynamic range.
• DSP section includes sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings.

2. Belangrike veiligheidsinstruksies

Volg altyd hierdie basiese veiligheidsmaatreëls wanneer u u amplewendiger:

• Lees hierdie instruksies.
• Hou hierdie instruksies.
• Gee ag op alle waarskuwings.
• Volg alle instruksies.
• Moenie hierdie toestel naby water gebruik nie.
• Maak slegs skoon met 'n droë lap.
• Moenie enige ventilasie-openinge blokkeer nie. Installeer in ooreenstemming met die vervaardiger se instruksies.
• Moenie naby enige hittebronne soos verkoelers, hitteregisters, stowe of ander toerusting (insluitend ampversterkers) wat hitte produseer.
• Moenie die veiligheidsdoel van die gepolariseerde of aardingstipe prop verslaan nie. 'n Gepolariseerde prop het twee lemme met een wyer as die ander. 'n Aardingsprop het twee lemme en 'n derde aardpunt. Die wye lem of die derde tand word voorsien vir jou veiligheid. Indien die voorsiene prop nie in jou uitlaat pas nie, raadpleeg 'n elektrisiën vir die vervanging van die verouderde uitlaat.
• Beskerm die kragkoord teen geloop of vasgeknyp, veral by proppe, geriefshouers en die punt waar dit uit die apparaat kom.
• Gebruik slegs aanhegsels/bykomstighede gespesifiseer deur die vervaardiger.
• Gebruik slegs met die wa, staander, driepoot, bracket of tafel wat deur die vervaardiger gespesifiseer is, of saam met die apparaat verkoop word. Wanneer 'n wa gebruik word, wees versigtig wanneer die kar/apparaat-kombinasie beweeg word om besering as gevolg van kantel te voorkom.
• Ontkoppel hierdie apparaat tydens weerligstorms of wanneer dit vir lang tye ongebruik word.
• Verwys alle diens na gekwalifiseerde dienspersoneel. Versorging word vereis wanneer die apparaat op enige manier beskadig is, soos kragtoevoerkoord of prop beskadig is, vloeistof gemors is of voorwerpe in die apparaat geval het, die apparaat aan reën of vog blootgestel is, nie normaal werk nie. , of laat vaar is.

3. Wat is in die boks

Upon unpacking your Behringer NX3000D, ensure all items listed below are present and in good condition:

• Behringer NX3000D 3000W Ultra-Lightweight Class-D Power Amplewendiger
• Kragkabel
• Vinnige Begingids (hierdie dokument dien as die omvattende handleiding)

Indien enige items ontbreek of beskadig is, kontak asseblief jou handelaar onmiddellik.

4. Produk verbyview

Familiarize yourself with the front and rear panels of your NX3000D amplewendiger.

4.1 Voorpaneel

Beeld: Voorkant view of the Behringer NX3000D Power Amplifier, showing the main display, control knobs for channels A and B, and status indicators.

Beeld: Skuins voorkant view of the Behringer NX3000D Power Amplifier, highlighting the rack-mountable design and ventilation grilles.

• Kragknoppie: Draai die amplewendiger aan of af.
• Level Controls (CH A/CH B): Pas die insetgevoeligheid vir elke kanaal aan.
• LCD-skerm: Shows DSP settings, operating modes, and status information.
• Navigation Buttons (SETUP, PROCESS, UP/DOWN, EXIT): Used to navigate and adjust DSP parameters.
• LED Indicators (SIGNAL, LIMIT, PROTECT): Provide visual feedback on signal presence, clipping, and protection status.

4.2 Agterpaneel

Beeld: Agter view of the Behringer NX3000D Power Amplifier, displaying input and output connectors, cooling fan, and power inlet.

Beeld: Skuins agterkant view of the Behringer NX3000D Power Amplifier, showing the USB port for PC connection and additional ventilation.

• AC-invoer: Connects to the main power supply using the provided power cable.
• Input Connectors (CH A/CH B): XLR/TRS combo jacks for connecting audio sources.
• Output Connectors (CH A/CH B): Twist-lock speaker connectors for connecting loudspeakers.
• USB-poort: For connecting to a computer for DSP control and firmware updates.
• Koelwaaier: Ensures proper thermal management of the amplewendiger.

5. Opstelling

Follow these steps to set up your Behringer NX3000D amplewendiger:

1. Plasing: Plaas die amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the unit for airflow. For rack mounting, secure the amplifier using appropriate rack screws.
2. Kragverbinding: Connect the supplied AC power cable to the AC input on the rear panel of the amplifier and then to a suitable power outlet. Ensure the amplifier's power switch is in the OFF position before connecting.
3. Invoerverbindings: Connect your audio source (e.g., mixer, audio interface) to the Input Connectors (CH A and/or CH B) on the rear panel using XLR or 1/4" TRS cables.
4. Uitvoerverbindings: Connect your passive loudspeakers to the Output Connectors (CH A and/or CH B) using high-quality speaker cables with twist-lock connectors. Ensure correct polarity (+ to + and - to -) and that the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or Bridge mode 4 Ohms).
5. Aanvanklike krag aan: With all connections secure and input levels turned down, switch the amplifier's power button to the ON position. The display will illuminate, and the unit will perform a self-test.

6. Bedryf die Amplewendiger

The Behringer NX3000D features advanced DSP control for precise sound optimization.

6.1 Basiese werking

1. Aanpassing van vlakke: Slowly increase the Level Controls for CH A and/or CH B until the desired volume is achieved. Monitor the SIGNAL and LIMIT LEDs to prevent clipping. The SIGNAL LED indicates audio presence, while the LIMIT LED indicates that the signal is approaching clipping.
2. Moniteringsstatus: The PROTECT LED will illuminate if the amplifier enters protection mode due to overheating, short circuits, or other issues. If this occurs, turn off the amplifier, resolve the issue, and then power it back on.

6.2 DSP Control

The integrated DSP allows for comprehensive sound shaping and system management:

• Accessing DSP Settings: Gebruik die OPSTEL button to enter the main DSP menu. Navigate through options using the OP/AF buttons and confirm selections with the rotary encoder.
• Oorsig: Configure high-pass and low-pass filters for each channel. Choose from 3 filter types (e.g., Butterworth, Linkwitz-Riley) and slopes up to 48 dB/octave. This is crucial for integrating subwoofers or bi-amping stelsels.
• Equalization (EQ): Utilize the 8 parametric EQs and 2 dynamic EQs per channel to fine-tune the frequency response. This helps in correcting room acoustics or tailoring the sound to specific preferences.
• Vertraging: Apply delay to individual channels to align speakers in different physical positions, ensuring phase coherence.
• Dinamiese verwerking: Adjust compression, limiting, and gating settings to control the dynamic range of your audio.
• SmartSense Loudspeaker Impedance Compensation: This feature automatically adjusts the amplifier's output to match the loudspeaker impedance, providing consistent power delivery and improved sound quality.
• Sekuriteitinstellings: Lock DSP settings to prevent unauthorized changes, ideal for fixed installations.

For detailed DSP parameter adjustments, refer to the full software manual available on the Behringer website or connect the amplifier to a PC via the USB port for software control.

7. Onderhoud

Behoorlike onderhoud verseker die lang lewensduur en optimale prestasie van u amplewendiger.

• Skoonmaak: Maak gereeld die buitekant van die skoon amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris.
• Ventilasie: Maak altyd seker dat die amplifier's ventilation openings are not obstructed. Overheating can lead to reduced performance and potential damage.
• Berging: As die stoor van die amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging or a protective case.

8. Probleemoplossing

If you encounter issues with your Behringer NX3000D, consult the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact Behringer support or a qualified service technician.

9. Tegniese spesifikasies

10. Waarborg en Ondersteuning

10.1 Produkwaarborg

The Behringer NX3000D amplifier typically comes with a 3-jaar beperkte waarborg, indicating its design and engineering quality. Please refer to the warranty card included with your product or visit the official Behringer webwebwerf vir gedetailleerde bepalings en voorwaardes.

Image: Behringer logo with a '3 Years Warranty' badge, indicating the product is designed and engineered in Germany.

10.2 Tegniese Ondersteuning

For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Behringer website or contact their customer support. You can find more information and resources at the Behringer Winkel.