Nedis WIFIWC10WT

Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT) User Manual

For Electric Curtains, Roller Blinds, and Awnings

1. Inleiding

Thank you for choosing the Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT). This device allows you to control your electric curtains, roller blinds, or awnings conveniently via a physical wall switch, the Nedis SmartLife application, or voice commands. This manual provides essential information for safe installation, operation, and maintenance of your device.

Voorkant view of the Nedis SmartLife Wi-Fi Wall Switch with three control buttons and SmartLife logo.

Beeld 1.1: Voorkant view of the Nedis SmartLife Wi-Fi Wall Switch. This switch features three touch-sensitive buttons for control and integrates with the SmartLife ecosystem.

2. Opstelling en installering

2.1 Veiligheidsmaatreëls

  • Ensure the main power supply is switched off before installation to prevent electric shock.
  • Installasie moet deur 'n gekwalifiseerde elektrisiën of in ooreenstemming met plaaslike elektriese kodes uitgevoer word.
  • Moenie die maksimum laaikapasiteit van 300W oorskry nie.

2.2 Bedradingsdiagram

Connect the wires to the terminals on the back of the switch as shown in the diagram below. Ensure all connections are secure.

Terug view of the Nedis SmartLife Wi-Fi Wall Switch showing wiring terminals labeled L, N, L1, L2, L3.

Prent 2.1: Agter view of the wall switch, displaying the connection terminals. 'L' is for Live, 'N' for Neutral, and 'L1', 'L2', 'L3' are for motor control (Up, Down, Stop/Common).

  • L: Live wire (Phase)
  • N: Neutrale draad
  • L1: Motor Up (e.g., curtain open, blind up, awning out)
  • L2: Motor Down (e.g., curtain close, blind down, awning in)
  • L3: Common or Stop (refer to your motor's wiring for specific connection)

2.3 App-installasie en Wi-Fi-verbinding

  1. Laai die af Nedis SmartLife toepassing vanaf jou slimfoon se toepassingswinkel (iOS of Android).
  2. Register or log in to your Nedis SmartLife account.
  3. Power on the wall switch. The Wi-Fi indicator light should start blinking rapidly. If not, press and hold the middle button for 5-10 seconds until it blinks.
  4. In the app, tap '+' to add a new device. Select 'Curtain Switch' or similar from the device list.
  5. Follow the on-screen instructions to connect the switch to your 2.4 GHz Wi-Fi network. Note: This device only supports 2.4 GHz Wi-Fi.

2.4 Kalibrasie

After successful Wi-Fi connection, calibrate the switch to your curtain/blind/awning motor. This sets the open and closed positions.

  1. In the Nedis SmartLife app, navigate to the device settings for your wall switch.
  2. Look for a 'Calibration' or 'Travel Limit Setting' option.
  3. Follow the app's prompts to fully open and then fully close your curtain/blind/awning. The app will record the travel time for each direction.
  4. Test the open and close functions to ensure calibration is accurate. Adjust if necessary.

3. Bedryf die Toestel

3.1 Handmatige beheer

The wall switch has three touch buttons:

  • Op-pyltjie-knoppie: Opens the curtain/blind/awning.
  • Middle Pause Button: Stop die beweging.
  • Afpyltjie-knoppie: Closes the curtain/blind/awning.

3.2 Toepassingsbeheer

Use the Nedis SmartLife app for advanced control and scheduling.

Screenshot of the Nedis SmartLife app interface for controlling a sunshade, showing Open, Paused, Close buttons and a Timer option.

Image 3.1: Nedis SmartLife app interface for controlling a sunshade. The app allows for opening, pausing, closing, and setting timers for your connected device.

  • Oopmaak/Toemaak/Pouseer: Control the movement directly from the app interface.
  • Timer/Schedule: Set specific times for your curtains/blinds/awnings to open or close automatically.
  • Tonele: Create custom scenes to automate actions based on conditions like time of day, weather, or other SmartLife devices.

3.3 Stembeheer

The switch is compatible with Amazon Alexa and Google Assistant. Link your Nedis SmartLife account to your voice assistant app and use commands such as:

  • "Alexa, open the living room blinds."
  • "Hey Google, close the bedroom curtains."
  • "Alexa, stop the awning."

4. Onderhoud

The Nedis SmartLife Wi-Fi Wall Switch requires minimal maintenance.

  • Maak die oppervlak skoon met 'n sagte, droë lap. Moenie skuurmiddels of oplosmiddels gebruik nie.
  • Ensure no liquids enter the device.
  • Regularly check for any loose wiring connections, especially after initial installation.

5. Probleemoplossing

If you encounter issues with your Nedis SmartLife Wi-Fi Wall Switch, refer to the following common solutions:

  • Toestel koppel nie aan Wi-Fi nie:
    • Ensure your Wi-Fi network is 2.4 GHz. The switch does not support 5 GHz networks.
    • Check if the Wi-Fi indicator light is blinking rapidly. If not, press and hold the middle button for 5-10 seconds to enter pairing mode.
    • Verify your Wi-Fi password and network stability.
    • Move the switch closer to your Wi-Fi router during setup.
  • Calibration issues (stops at wrong point):
    • Repeat the calibration process in the Nedis SmartLife app. Ensure the curtain/blind/awning moves fully to its open and closed positions during calibration.
    • Check for any physical obstructions preventing full movement.
    • Ensure your motor has working end-switches if applicable, as the switch relies on these for accurate positioning.
  • Toestel reageer nie:
    • Check the power supply to the switch.
    • Verify your Wi-Fi connection. If the Wi-Fi is down, app control will not work, but manual control should still function.
    • Restart the device by turning off the main power for a few seconds and then turning it back on.
    • If the issue persists, consider resetting the device to factory settings (refer to app for specific instructions, usually involves holding a button for an extended period) and re-pairing.
  • Unexpected behavior (e.g., uncontrolled movement, high-pitched noise):
    • Immediately disconnect power to the device.
    • This may indicate a hardware fault. Do not attempt to repair it yourself. Contact customer support.

6. Produkspesifikasies

HandelsmerkNedis
ModelnommerWIFIWC10WT
Produkafmetings (L x B x H)8.6 x 3.5 x 8.6 cm
Gewig180 g
KleurSwart
BedryfsmodusAAN AF
Huidige gradering6 Ampere
Wattage300 watt
Skakel TipeDrukknop
Montage tipeMuurmontering
VerbindingsprotokolWi-Fi (2.4 GHz)
Tipe beheerderAmazon Alexa, Google Assistant
Versoenbare toestelleNedis SmartLife
IP-graderingIP65
VoldoeningIP65, IEC 60669-2-1:2002

7. Waarborginligting

This Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT) comes with a 1-year limited warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, unauthorized modifications, accidents, or improper installation.

Behou asseblief jou aankoopbewys vir waarborgeise.

8. Kliëntediens

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Nedis webwebwerf of kontak hul kliëntediensafdeling.

  • Nedis Webwebwerf: www.nedis.com
  • Verwys na die webwebwerf vir kontakbesonderhede spesifiek vir jou streek.

© 2024 Nedis. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.