Amazon Basics AB-DH504-SN

Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Model: AB-DH504-SN

Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.

Veiligheidsinligting

WAARSKUWING: Hierdie produk kan jou blootstel aan chemikalieë insluitend lood, wat aan die staat Kalifornië bekend is om kanker en geboortedefekte of ander reproduktiewe skade te veroorsaak. Vir meer inligting gaan na www.P65Warnings.ca.gov.

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

  • Exterior Lever Assembly
  • Interior Lever Assembly
  • Adjustable Latch (2-3/8" - 2-3/4" backset)
  • Rounded Steel Faceplate
  • Stakplaat
  • Monteer skroewe
  • Instruksie Handleiding
Components of the Amazon Basics AB-DH504-SN door lever

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.

Opstelling en installasie

This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview van die installasie proses:

  1. Berei die deur voor: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
  2. Pas die grendel aan: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
  3. Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
  4. Install Interior Lever: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
  5. Installeer die sluitplaat: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
  6. Toetswerking: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.
Installed Amazon Basics door lever on a white door

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.

Bedryfsinstruksies

To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.

Onderhoud

To maintain the finish and functionality of your door lever, follow these guidelines:

  • Skoonmaak: Maak die hefboom skoon met 'n sagte, damp lap. Vermy die gebruik van skuurmiddels, oplosmiddels of harde chemikalieë, aangesien dit die afwerking kan beskadig.
  • Smering: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
  • Spanning: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.

Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Lever is loose or wobbly.Bevestigingsskroewe is los.Draai die monteerskroewe aan die binnekant van die hefboom vas.
Die grendel trek nie heeltemal terug nie.Mechanism is dirty or dry; improper installation.Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment.
Door does not latch properly.Strike plate misalignment; latch bolt not extending fully.Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated.

Spesifikasies

KenmerkDetail
ModelnommerAB-DH504-SN
MateriaalZinc Alloy (body), Steel (internal structure)
VoltooiSatyn Nikkel
Deurdikte-versoenbaarheid1-3/8" to 1-3/4"
Verstelbare grendel-agterstel2-3/8" (60 mm) of 2-3/4" (70 mm)
Produk afmetings6.65"L x 4.29"B
Item gewig1.43 pond
StylPassage (non-locking)
UPC841511121248
Hand holding door lever showing dimensions

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.

© 2026 Amazon Basics. Alle regte voorbehou.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.