Global Fabric Task Chair 9326BK-JN01 User Manual

Belangrike veiligheidsinligting

For safe use, ensure the chair is fully assembled and all fastenings are secure. This chair has a maximum weight capacity of 250 lbs. and meets or exceeds ANSI/BIFMA standards. Always check the chair for stability before use.

• Moenie die maksimum gewig kapasiteit van 250 lbs oorskry nie.
• Regularly inspect all bolts and screws for tightness. Retighten as necessary.
• Moenie op die stoel staan ​​nie.
• Use the chair only for its intended purpose as an office task chair.

Produk verbyview

The Global Fabric Task Chair 9326BK-JN01 is designed for office environments, providing comfort and support. Key features include built-in lumbar support, an armless design for versatility, and a pneumatic seat-height adjustment system.

An image of the Global Fabric Task Chair, model 9326BK-JN01, in navy fabric. The image displays the overall dimensions: 17.5 inches to 22.5 inches in height, 25 inches in depth, and 22 inches in width at the base.

Kenmerke:

• Navy fabric upholstery for durability and appearance.
• Built-in lumbar support to reduce back tension.
• Pneumatic seat-height adjustment for customizable seating positions.
• Armless design for easy movement and space-saving under desks.
• Twin-wheel carpet casters for mobility on various surfaces.
• Rated for up to 250 lbs. based on an 8-hour workday.

Setup / Assembly Instructions

Partial assembly is required for this task chair. The assembly process is designed to be straightforward and typically does not require specialized tools.

Monteerstappe:

1. Pak komponente uit: Verwyder alle dele versigtig uit die verpakking. Verifieer dat alle komponente wat in die paklys gelys word, teenwoordig is.
2. Heg wiele aan die basis vas: Insert the twin-wheel carpet casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
3. Voeg gashyser in: Place the gas lift cylinder into the center hole of the assembled chair base.
4. Heg sitplek aan gashefboom vas: Carefully place the seat assembly onto the top of the gas lift cylinder. Ensure it is centered and fully seated.
5. Heg rugleuning aan: Secure the backrest to the seat mechanism using the provided hardware. Ensure all screws are tightened securely.
6. Finale kontrole: Before use, ensure all connections are secure and the chair is stable.

Bedryfsinstruksies

Pneumatiese sitplekhoogteverstelling:

• Om verhoog the seat: While seated, lift the adjustment lever located under the right side of the seat. The seat will rise. Release the lever at the desired height.
• Om laer the seat: While seated, lift the adjustment lever. Apply slight body weight to the seat. The seat will lower. Release the lever at the desired height.

Chair Mobility:

The chair is equipped with twin-wheel carpet casters, allowing for easy movement across carpeted and hard floor surfaces. Ensure the path is clear of obstructions before moving the chair.

Onderhoud en versorging

• Skoonmaakstof: For general cleaning, spot clean the fabric with a mild detergent and a damp cloth. Avoid saturating the fabric. Test any cleaning solution on an inconspicuous area first.
• Raam skoonmaak: Wipe the plastic and metal components with a soft, damp lap.
• Gereelde inspeksie: Periodically check all screws and bolts to ensure they remain tight. Retighten as needed to maintain stability and safety.
• Vermy harde chemikalieë: Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the chair's materials.

Probleemoplossing

• Chair is unstable: Ensure all assembly screws are fully tightened. Check that the gas lift is properly seated in the base and seat mechanism.
• Difficulty adjusting seat height: Verify that the adjustment lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is not damaged.
• Piepende geluide: Apply a small amount of silicone-based lubricant to moving parts or connection points, particularly where the seat and backrest attach to the mechanism.
• Wiele rol nie glad nie: Check casters for accumulated debris (hair, lint) and clean as necessary. Ensure casters are fully inserted into the base.

Spesifikasies

Waarborg inligting

This Global Fabric Task Chair 9326BK-JN01 comes with a Lewenslange beperkte waarborg. This warranty covers defects in materials and workmanship under normal use. For specific details regarding coverage, limitations, and how to make a warranty claim, please refer to the official Global warranty documentation or contact Global customer support.

Kontakinligting

For further assistance, technical support, or warranty inquiries, please contact Global customer service:

• Webwebwerf: www.globalfurnituregroup.com (Verwys asseblief na die amptenaar webwebwerf vir die mees onlangse kontakbesonderhede.)
• Telefoon: Verwys na die vervaardiger se webwebwerf vir streeks kontaknommers.