Audibax Orlando 162 Plus PAR-lig gebruikershandleiding

1. Inleiding

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. Veiligheidsinligting

• Elektriese veiligheid: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• Plasing: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• Hantering: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• Omgewing: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. Pakketinhoud

Verifieer dat alle items teenwoordig is tydens uitpak:

• Audibax Orlando 162 Plus PAR Light
• Montagebeugel
• Kragkabel
• Gebruikershandleiding

4. Produk verbyview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

Figuur 4.1: Voorkant view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

Figuur 4.2: Kant view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

Beheerpaneel en verbindings

The rear panel provides access to the control interface and input/output connections.

Figuur 4.3: Agter view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• Digitale skerm: Shows current mode and parameter settings.
• MENU-knoppie: Navigates through the main menu options.
• OP/AF-knoppies: Adjust parameter values or navigate menu items.
• ENTER-knoppie: Bevestig keuses.
• DMX IN/UIT: 3-pin XLR connectors for DMX signal connection.
• KRAG IN: IEC power input for connecting the power cable.

5. Opstelling

5.1 Montering

1. Attach the mounting bracket securely to the fixture using the provided screws.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 Kragverbinding

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Plug the other end of the power cable into a suitable grounded power outlet.

5.3 DMX-verbinding (opsioneel)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. Bedryfsinstruksies

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 Spyskaartnavigasie

• Druk SPYSKAART to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• Gebruik UP en AF to adjust values or select sub-options within a menu.
• Druk ENTER to confirm your selection or save changes.

6.2 Bedryfsmodusse

The Orlando 162 Plus offers several operational modes:

• DMX-modus: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• Outomatiese modus: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• Klank-geaktiveerde modus: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• Meester-/slaafmodus: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• Statiese kleurmodus: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• Strobe funksie: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. Onderhoud

• Skoonmaak: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• Inspeksie: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• Berging: When not in use, store the fixture in a dry, dust-free environment.

8. Probleemoplossing

9. Spesifikasies

10. Waarborg en Ondersteuning

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax webwebwerf of kontak jou plaaslike handelaar.