WOBANE Under Cabinet LED Strip Light Kit

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOBANE Under Cabinet LED Strip Light Kit. This kit is designed to provide efficient and warm white illumination (2700K) for various indoor applications such as cabinets, cupboards, desks, shelves, and more. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Pakketinhoud

Verifieer dat alle komponente in jou pakket teenwoordig is:

• 4 x LED Light Bars (20 inches each)
• 1 x Power Adapter (ETL Listed, 12V DC)
• 1 x In-line On/Off Switch
• Connectors (various types for straight and angled connections)
• Kabelhouers

3. Produkspesifikasies

4. Belangrike veiligheidsinstruksies

• Lees alle instruksies voordat u die produk gebruik.
• Hierdie produk is ontwerp vir slegs binnenshuise gebruikMoenie aan water of hoë humiditeit blootstel nie.
• Maak seker dat die kragtoevoer ontkoppel is voor installasie of instandhouding.
• Gebruik slegs die meegeleverde kragadapter. Die gebruik van 'n onversoenbare adapter kan die produk beskadig of 'n brandgevaar inhou.
• Do not cut the LED strips unless specifically instructed and at designated cut marks. Improper cutting can damage the strip and void the warranty.
• Avoid bending the LED strips sharply, especially at connection points, to prevent damage to the circuit.
• Hou buite bereik van kinders.
• Indien enige deel van die produk beskadig is, staak gebruik onmiddellik en kontak kliëntediens.

5. Installasiehandleiding

Follow these steps for a simple and secure installation:

5.1. Oppervlakvoorbereiding

Before attaching the LED strips, ensure the installation surface is clean, dry, and smooth. Wipe the area with a clean cloth to remove dust, grease, or moisture. This will ensure optimal adhesion of the tape.

Figure 5.1: Clean the installation surface thoroughly before applying the LED strips.

5.2. Attaching LED Strips

1. Carefully peel off the protective backing from the adhesive tape on the back of each LED light bar.
2. Press the LED strip firmly onto the desired surface. Apply even pressure along the entire length to ensure good contact.

5.3. Verbindende komponente

Connect the LED light bars to each other and to the power adapter using the provided connectors and the in-line switch. Ensure all connections are secure.

Figure 5.2: Use the provided connectors to link multiple LED light bars.

Use the included cable holders to manage and secure any loose wiring, keeping the installation neat and tidy. Connect the in-line switch and power adapter to the assembled LED strips, then plug the adapter into a standard electrical outlet.

Figure 5.3: Secure cables with cable holders for a clean installation.

5.4. Customizing Layout with Connectors

The kit includes flexible connectors that allow for versatile installation around corners or across gaps between surfaces. These connectors ensure a continuous lighting effect even in complex layouts.

Figure 5.4: Flexible connectors enable seamless corner installations.

Figure 5.5: Achieve various angles with the flexible connectors.

6. Operasie

Once installed and connected to power, operate the WOBANE LED Strip Light Kit using the in-line switch. Simply toggle the switch to turn the lights ON or AF.

7. Onderhoud

To maintain the performance and appearance of your LED strip lights:

• Maak seker dat die krag ontkoppel is voor skoonmaak.
• Wipe the LED strips and other components with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Vermy direkte kontak met water.

8. Probleemoplossing

9. Waarborg en Ondersteuning

For warranty information or technical support, please refer to the product packaging or contact WOBANE customer service directly. Keep your purchase receipt as proof of purchase.