Airam LED Cabinet Lamp 1.2W handleiding

1. Inleiding

This manual provides essential instructions for the safe and efficient use of your Airam LED Cabinet Lamp 1.2W. This battery-operated lamp features a PIR motion sensor, automatically illuminating when motion is detected, making it ideal for cabinets, drawers, and other enclosed spaces. Please read this manual thoroughly before installation and operation.

2. Opstelling

2.1 Pakketinhoud

Voordat u voortgaan, maak seker dat alle komponente teenwoordig is:

• Airam LED Cabinet Lamp 1.2 W
• Mounting hardware (screws or adhesive strips, typically included in packaging)

Figure 1: Airam LED Cabinet Lamp in its retail packaging, showing the lamp and typical mounting accessories.

2.2 Battery installasie

The Airam LED Cabinet Lamp requires 4 x AA 1.5V batteries (not included).

1. Locate the battery compartment cover on the back or side of the lamp.
2. Skuif of knip die deksel los om die kompartement oop te maak.
3. Insert 4 AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. Maak die batterykompartement se deksel stewig toe.

2.3 Mounting the Lamp

Die lamp can be mounted using screws or adhesive strips, depending on the included hardware and your preference. Choose a location where the motion sensor has a clear line of sight to the area where movement is expected (e.g., inside a cabinet door, above a drawer).

Figuur 2: Voorkant view of the Airam LED Cabinet Lamp, highlighting the central motion sensor.

Using Screws (if applicable):

1. Mark the desired mounting position.
2. Drill pilot holes if necessary, matching the lamp's mounting holes.
3. Beveilig die lamp met behulp van die meegeleverde skroewe.

Using Adhesive Strips (if applicable):

1. Maak die monteeroppervlak deeglik skoon om te verseker dat dit droog en vry van stof of vet is.
2. Peel the protective backing from the adhesive strips.
3. Firmly press the lamp onto the desired surface for at least 30 seconds.

3. Operasie

The Airam LED Cabinet Lamp is designed for automatic operation using its integrated PIR (Passive Infrared) motion sensor.

1. Once batteries are installed and the lamp is mounted, it will enter standby mode.
2. When the PIR motion sensor detects movement within its range (e.g., opening a cabinet door or drawer), the LED lights will automatically turn on.
3. Die lamp will remain illuminated for approximately 25 seconds after motion is detected.
4. If no further motion is detected within this period, the lamp will automatically turn off to conserve battery power.
5. If continuous motion is detected, the lamp will remain on until motion ceases for 25 seconds.

Let wel: Ensure the motion sensor is not obstructed for optimal performance.

4. Onderhoud

4.1 Batteryvervanging

When the light output diminishes or the lamp stops functioning, it is time to replace the batteries. Refer to section 2.2 Battery installasie vir gedetailleerde instruksies.

• Always replace all 4 AA batteries at the same time.
• Moenie ou en nuwe batterye, of verskillende tipes batterye meng nie.
• Gooi gebruikte batterye verantwoordelik volgens plaaslike regulasies weg.

4.2 Skoonmaak

Die lamp is constructed from polycarbonate and ABS plastic. To clean the lamp:

• Vee die oppervlak af met 'n sagte, droë of effens droë lap.amp lap.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish or the sensor.
• Ensure no liquid enters the battery compartment or sensor area.

5. Probleemoplossing

6. Spesifikasies

7. Waarborg en Ondersteuning

Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.

For technical support or further assistance, please contact the manufacturer, Bot Lighting, or your retailer. Keep your purchase receipt as proof of purchase.