AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder User Manual

1. Inleiding

Thank you for choosing the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before operating the tool and keep it for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the life of your angle grinder.

2. Algemene veiligheidsinligting

WAARSKUWING: Lees alle veiligheidswaarskuwings, instruksies, illustrasies en spesifikasies wat by hierdie elektriese gereedskap voorsien word. Versuim om alle instruksies hieronder gelys te volg, kan elektriese skok, brand en/of ernstige beserings tot gevolg hê.

2.1 Werkareaveiligheid

• Hou werkarea skoon en goed belig. Deurmekaar of donker areas nooi ongelukke uit.
• Moenie elektriese gereedskap in plofbare atmosfeer gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof. Elektriese gereedskap skep vonke wat die stof of dampe kan aansteek.
• Hou kinders en omstanders weg terwyl 'n elektriese gereedskap gebruik word. Afleidings kan veroorsaak dat jy beheer verloor.

2.2 Elektriese veiligheid

• Kraggereedskapproppe moet by die uitlaat pas. Moet nooit die prop op enige manier verander nie.
• Vermy liggaamskontak met geaarde of geaarde oppervlaktes, soos pype, verkoelers, reekse en yskaste. Daar is 'n verhoogde risiko van elektriese skok as jou liggaam geaard of geaard is.

2.3 Persoonlike veiligheid

• Dra altyd oogbeskerming. Gebruik veiligheidsbril, 'n veiligheidsbril of 'n gesigskerm.
• Wear hearing protection when operating power tools for extended periods.
• Trek behoorlik aan. Moenie los klere of juweliersware dra nie. Hou jou hare en klere weg van bewegende dele.
• Bly wakker, kyk wat jy doen en gebruik gesonde verstand wanneer jy 'n elektriese gereedskap gebruik.

2.4 Spesifieke Veiligheid vir Hoekslypers

• Always use the guard provided with the tool. Ensure it is securely fastened and positioned for maximum safety.
• Use only grinding or cutting discs that are rated for the speed of the grinder and are of the correct diameter (230mm) and bore size (M14).
• Secure the workpiece. Never hold small pieces in your hand while grinding.
• Be aware of the 'Dead Man' Switch feature, which requires continuous pressure to operate, stopping the tool if released.
• The tool features Anti-Kickback Protection and an Electric Brake for enhanced safety. Familiarize yourself with these functions.
• The Anti-Restart System prevents accidental startup after a power interruption.

3. Produk verbyview

The AEG BEWS 18-230BL-0 is a powerful 230mm brushless 18V cordless angle grinder designed for demanding cutting and grinding applications. It features a robust brushless motor for extended tool life and efficiency, and a Dual 18V system allowing operation with one or two batteries.

This image shows the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder from a front-side view, highlighting its main body, disc guard, and auxiliary handle. The tool is orange and black.

3.1 Sleutelkenmerke

• 18V Brushless Motor: Bied verhoogde krag, doeltreffendheid en langer gereedskapslewe.
• Dual 18V System: Operates with either one or two 18V batteries for flexible power options.
• 'Dead Man' Switch: Enhances user safety by stopping the tool immediately upon release.
• Anti-Kickback Protection: Reduces the risk of sudden tool movement if the disc binds.
• Elektriese Rem: Quickly stops the disc for added safety and productivity.
• Anti-Restart System: Prevents unintentional startup after a battery change or power interruption.
• Sagte begin: Ensures a smooth and controlled startup, reducing jerk.
• Rotatable Anti-Vibration Rear Handle with Soft Grip: Provides comfort and control during prolonged use.
• 3-Position Anti-Vibration Auxiliary Handle: Offers versatile and comfortable grip options.

4. Opstelling

4.1 Battery installasie

This tool is supplied without batteries or charger. Ensure you use compatible AEG 18V Lithium-ion batteries. To install, slide the battery pack(s) into the battery port(s) until it clicks into place. To remove, press the release button and slide the battery out.

4.2 Bevestig die hulphandvatsel

The auxiliary handle can be screwed into one of the three designated positions on the gear housing. Choose the position that provides the best control and comfort for your application. Tighten securely by hand.

4.3 Mounting and Adjusting the Guard

The guard is essential for safety. Ensure it is correctly fitted and adjusted to protect against sparks and debris. Loosen the guard clamping screw, position the guard to cover the maximum amount of the disc exposed to the operator, and then tighten the screw firmly.

4.4 Installering van die Slyp-/Snyskyf

1. Maak seker dat die gereedskap afgeskakel is en die batterypak verwyder is.
2. Druk en hou die spilslotknoppie in.
3. Plaas die binneste flens op die spil.
4. Position the grinding or cutting disc onto the inner flange, ensuring it sits flat.
5. Screw the outer flange (locking nut) onto the spindle.
6. Use the supplied spanner wrench to firmly tighten the outer flange while holding the spindle lock button. Do not overtighten.

5. Bedryfsinstruksies

5.1 In-/afskakel

• Om aan te skakel: Press and hold the 'Dead Man' switch. The tool will start with a soft start.
• Om af te skakel: Release the 'Dead Man' switch. The electric brake will quickly stop the disc.

5.2 Werkstegnieke

• Always hold the angle grinder firmly with both hands, using the main handle and the auxiliary handle.
• Maak seker dat die werkstuk veilig is clampvasgehou of vasgehou om beweging tydens operasie te voorkom.
• For grinding, apply light pressure and move the tool evenly across the surface. Avoid excessive pressure, which can overload the tool and damage the disc.
• For cutting, use a cutting disc and make straight, controlled cuts. Do not use grinding discs for cutting.
• Laat die gereedskap volle spoed bereik voordat die werkstuk aangeraak word.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Onderhoud

Gereelde onderhoud verseker die lang lewensduur en veilige werking van jou hoekslyper.

6.1 Skoonmaak

• Verwyder altyd die batterypak voordat dit skoongemaak word.
• Keep the ventilation openings clear to prevent overheating. Use compressed air to blow out dust from the motor housing.
• Clean the tool housing with a soft, damp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.

6.2 Inspeksie

• Regularly inspect the power tool for any signs of damage, such as cracks in the housing, damaged cables, or loose components.
• Check the grinding/cutting discs for wear or damage before each use. Replace damaged discs immediately.
• Ensure the guard is securely attached and undamaged.

6.3 Berging

Bêre die gereedskap op 'n droë, veilige plek buite die bereik van kinders. Verwyder die batterypak voordat u dit vir lang tye bêre.

7. Probleemoplossing

If you encounter problems with your angle grinder, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact AEG customer service or an authorized service center.

8. Spesifikasies

9. Waarborg en Ondersteuning

9.1 Waarborginligting

This AEG BEWS 18-230BL-0 Angle Grinder comes with a 1 jaar waarborg vanaf die aankoopdatum. Bewaar asseblief u bewys van aankoop vir waarborgeise. Die waarborg dek defekte in materiaal en vakmanskap onder normale gebruik.

9.2 Beskikbaarheid van onderdele

Spare parts for this product are available in the EU for a period of 5 jaar from the date of manufacture. For genuine spare parts, please contact an authorized AEG service center.

9.3 Kliëntediens

For technical assistance, service, or warranty inquiries, please contact your local AEG customer service representative or visit the official AEG website for support contact details. Always provide the model number (BEWS18-230BL-0) and serial number (if applicable) when seeking support.