Amazon Basics DS-110SAM Small Slim Desk Drawer Security Safe User Manual

Inleiding

This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.

Belangrike veiligheidsinligting

• Do not store the emergency override keys inside the safe. Keep them in a secure, separate location.
• Maak seker dat die kluis stewig gemonteer is om ongemagtigde verwydering te voorkom.
• This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.

Pakketinhoud

• Amazon Basics DS-110SAM Security Safe
• Emergency Override Keys (2)
• Monteringshardeware (skroewe, ankers)
• Instructiehandleiding (hierdie dokument)

Opstelling

1. Battery Installasie

1. Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
2. Vind die batterykompartement aan die binnekant van die kluisdeur.
3. Plaas 4 nuwe AA-batterye in en maak seker dat die polariteit (+/-) korrek is.
4. Maak die batterykompartement se deksel toe.

2. Stel jou persoonlike kode in

Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
2. On the keypad, enter your new personal code (3 to 8 digits).
3. Druk en hou the '#' button to confirm. You will hear a confirmation beep.
4. Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.

3. Montering van die kluis

For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.

Image: Back of the safe with pre-drilled mounting holes.

1. Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
2. Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
3. Drill pilot holes into the surface.
4. Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.

Image: The safe positioned within a desk drawer, demonstrating its intended use.

Die werking van die kluis

Beeld: Voorkant view of the safe, highlighting the electronic keypad and locking mechanism.

1. Opening met elektroniese sleutelbord

1. Enter your personal code (3 to 8 digits).
2. Press the '#' button. The green light will illuminate.
3. Draai die knop binne 5 sekondes kloksgewys om die kluisdeur oop te maak.

2. Opening with Emergency Override Key

Use this method if you forget your code or if the batteries are depleted.

Image: Close-up of the keypad with an emergency key in use.

1. Verwyder die sleutelborddeksel versigtig om die sleutelgat te openbaar.
2. Insert one of the emergency override keys into the keyhole.
3. Turn the key clockwise and simultaneously turn the knob to open the safe door.
4. Once open, you can replace the batteries if needed or reset your code.

3. Die kluis toemaak en sluit

1. Maak die kluisdeur toe.
2. Draai die knop antikloksgewys om die sluitskroewe te aktiveer. Die kluis is nou gesluit.

Image: Detail of the live-door bolts, which provide security when the safe is locked.

Onderhoud

1. Battery vervanging

When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.

2. Skoonmaak

Vee die buitekant van die kluis af met 'n sagte, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.

Probleemoplossing

• Kluis maak nie oop met kode nie:
  • Maak seker dat batterye vars en korrek geïnstalleer is.
  • Verify you are entering the correct code and pressing '#' firmly.
  • Try using the emergency override key.
• Sleutelbord reageer nie:
  • Vervang batterye.
  • Maak seker dat geen puin die knoppies blokkeer nie.
• Deur maak nie behoorlik toe nie:
  • Check for any obstructions inside the safe or around the door frame.
  • Ensure the locking bolts are fully retracted before attempting to close.

Spesifikasies

Waarborg inligting

For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webwebwerf. Waarborgbepalings en -voorwaardes kan wissel.

Kliënte ondersteuning

If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official webwebwerf of die kontakinligting verskaf met jou aankoop.