1. Inleiding
This manual provides detailed instructions for the installation, operation, and maintenance of the Audison AP BMW S8-4 Prima Series 8-inch (200mm) Subwoofer. This subwoofer is specifically designed for direct replacement of OEM speakers in BMW vehicles, optimizing performance within the factory under-seat enclosure.
Beeld 1.1: Voorkant view of the Audison AP BMW S8-4 Prima Series Subwoofer.
2. Wat is in die boks
Pak die inhoud versigtig uit en maak seker dat alle items teenwoordig is:
- Audison AP BMW S8-4 Subwoofer(s)
- Two (2) 5 mm polyurethane gaskets
- Crossover (if applicable to your system configuration)
- Monteer skroewe
- Gebruikershandleiding (hierdie dokument)
- Waarborg inligting
Image 2.1: Product packaging for the Audison AP BMW S8-4 Subwoofer.
Image 2.2: Included 5mm polyurethane gaskets for optimal fit.
3. Kenmerke
The Audison AP BMW S8-4 Subwoofer incorporates several design elements for enhanced performance and compatibility:
- Neodymium Magnetic Group: Maximizes performance while minimizing bulk and weight.
- BMW-Mini Optimized Electroacoustic Parameters: Engineered to deliver powerful and clear low frequencies, utilizing the acoustic load provided by the factory enclosure.
- 38 mm Voice Coil: Wound on an aluminum support for significant power dissipation and stability, even during high excursions.
- ABS Plastic Basket: Reinforced with fiberglass for durability and minimal installation depth.
- Front Magnet Design: Contributes to a minimal installation depth, ensuring compatibility with the entire range of BMW under-seat enclosures.
- 4 Ohm impedansie: The S8-4 model is designed with a 4 ohm impedance, suitable for system configurations where amplifiers can be bridged to deliver higher power.
Prent 3.1: View of the subwoofer cone and central voice coil area.
4. Spesifikasies
| Spesifikasie | Waarde |
|---|---|
| Modelnommer | APBMW-S8-4 |
| Komponent | Woofer |
| Kraghantering (Deurlopend) | 150W RMS |
| Kraghantering (piek) | 300 W |
| Impedansie | 4 ohm |
| Frekwensierespons | 35 ÷ 500 Hz |
| Item gewig | 3 pond (1.36 kg) |
| Produkafmetings (L x B x H) | 9.41 x 9.41 x 7.52 duim (23.9 x 23.9 x 19.1 cm) |
| Stemspoel deursnee | 38 mm |
| Magneet tipe | Neodymium |
Image 4.1: Technical drawing illustrating the dimensions of the subwoofer.
5. Opstelling en installering
The Audison AP BMW S8-4 subwoofer is designed for a direct replacement installation in BMW vehicles, specifically fitting into the factory under-seat enclosures. Professional installation is recommended to ensure optimal performance and avoid damage to the vehicle's electrical system.
5.1. Pre-installasie tjeks
- Verify the subwoofer's impedance (4 Ohms for S8-4) is compatible with your ampverligter se uitset.
- Maak seker dat die voertuig se battery ontkoppel is voordat u met die installasie begin.
- Confirm the factory under-seat enclosure is clean and free of debris.
5.2. Installasiestappe
- Carefully remove the existing OEM speaker from the under-seat enclosure. Refer to your vehicle's service manual for specific removal procedures.
- Place the provided 5 mm polyurethane gaskets onto the subwoofer's mounting surface. These gaskets ensure a perfect seal and decouple the subwoofer from vibrations within the enclosure.
- Position the Audison AP BMW S8-4 subwoofer into the factory enclosure. The design allows for a minimal installation depth, ensuring a proper fit.
- Secure the subwoofer using the provided mounting screws. Do not overtighten.
- Connect the subwoofer wiring to your amplifier. Pay close attention to polarity (+/-) to ensure correct phase.
- Reconnect the vehicle's battery and proceed to system testing.
Beeld 5.1: Syprofile of the subwoofer, highlighting its compact design for under-seat installation.
6. Bedryf
Once installed, proper tuning of your audio system is crucial for optimal subwoofer performance. The AP BMW S8-4 is designed to integrate seamlessly with your vehicle's acoustics.
6.1. Aanvanklike aanskakeling en toetsing
- After installation, turn on your car's audio system at a low volume.
- Listen for any unusual noises or distortion. If present, immediately turn off the system and re-check all connections.
- Gradually increase the volume and adjust the subwoofer level on your head unit or amplewendiger.
6.2. System Tuning
Vir die beste klankervaring, oorweeg die volgende:
- Crossover-instellings: Stel die laagdeurlaatfilter op jou amplifier or head unit to prevent higher frequencies from reaching the subwoofer. A common starting point is around 80-100 Hz, but this may vary based on your full-range speakers.
- Fase-aanpassing: Eksperimenteer met die fase-instelling (0° of 180°) op jou amplifier or head unit to achieve the most cohesive bass response with your front speakers.
- Winsinstelling: Pas die ampversterkerwins om by die uitsetvolume te pastage of your head unit. Avoid setting the gain too high, as this can lead to distortion and potential damage.
- Digital Sound Processor (DSP): If using a DSP (e.g., Audison AP 8.9 bit), utilize its capabilities for precise equalization, time alignment, and crossover adjustments to maximize the subwoofer's performance.
7. Onderhoud
The Audison AP BMW S8-4 subwoofer requires minimal maintenance to ensure long-term performance.
- Skoonmaak: Periodically clean the subwoofer's grille and surrounding areas with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Omgewingsfaktore: Protect the subwoofer from excessive moisture, extreme temperatures, and direct sunlight, which can degrade materials over time.
- Inspeksie: Inspekteer die bedrading van tyd tot tyd om te verseker dat hulle stewig en vry van korrosie bly.
8. Probleemoplossing
If you encounter issues with your Audison AP BMW S8-4 subwoofer, refer to the following common troubleshooting steps:
8.1. No Sound from Subwoofer
- Gaan verbindings na: Ensure all power, ground, remote, and signal cables are securely connected to both the ampverligter en die subwoofer.
- AmpVerligter Status: Verifieer dat jou amplifier is powered on (indicated by a power light) and not in protection mode.
- Hoofeenheidinstellings: Confirm that the subwoofer output is enabled and the volume is turned up on your head unit.
- Sit sekering: Inspekteer die amplifier's fuse and the main power fuse for the audio system. Replace if blown.
8.2. Distorted or Weak Bass
- Winsinstelling: Pas die amplifier gain. If set too high, it can cause distortion. If too low, it can result in weak bass.
- Crossover-instellings: Incorrect crossover settings can lead to distortion or a lack of impact. Adjust the low-pass filter.
- Fase: Incorrect phase can cause cancellation with other speakers, leading to weak bass. Adjust the phase setting.
- Omhulselintegriteit: Ensure the subwoofer is properly sealed within its enclosure. Air leaks can cause poor performance.
8.3. Intermittent Sound
- Los verbindings: Re-check all wiring for any loose or corroded connections.
- Signal Cable Interference: Ensure RCA cables are routed away from power cables to prevent noise.
If these steps do not resolve the issue, contact Audison customer support or a qualified car audio technician.
9. Waarborg en Ondersteuning
The Audison AP BMW S8-4 Subwoofer comes with a 1-jaar vervaardigerwaarborg. Hierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik.
9.1. Waarborg-eise
To make a warranty claim, please retain your proof of purchase and contact your authorized Audison dealer or Audison customer support. The warranty does not cover damage caused by improper installation, abuse, accident, neglect, or unauthorized modification.
9.2. Tegniese Ondersteuning
For technical assistance, installation guidance, or further inquiries, please visit the official Audison website or contact their customer support department. Contact information can typically be found on the Audison website or in the warranty documentation included with your product.