JESLED 8FT LED Bulbs (Model JND-T88FT-FA8-A2-TC-50DW-12P) Instruction Manual

1. Inleiding

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your JESLED 8FT LED Bulbs. These bulbs are designed as energy-efficient replacements for traditional fluorescent tubes in various indoor settings.

2. Belangrike veiligheidsinligting

WARNING: To prevent electric shock, always turn off power at the circuit breaker before installation or servicing.

• This product requires a ballast bypass installation. Do not attempt to install these LED tubes with an existing ballast.
• Ensure the fixture is modified to supply line voltage directly to the sockets.
• Moenie fluoresserende l installeer nieamps into a fixture that has been modified for LED tubes.
• Not suitable for use with standard dimmers unless explicitly stated otherwise.
• Install this item away from radio, remote control doors, or similar devices, as it may cause electromagnetic interference (EMI).
• Always consult a qualified electrician if you are unsure about any installation steps.

3. Produk verbyview

The JESLED 8FT LED Bulbs are designed for high brightness and energy efficiency, serving as direct replacements for 8-foot fluorescent tubes in various indoor settings.

Figuur 3.1: oorview of JESLED 8FT LED Bulbs (12-pack).

Sleutel kenmerke:

• Hoë helderheid: 6000+ lumens output for clear visibility.
• Energiebesparing: Up to 65% reduction in electricity consumption compared to fluorescent tubes.
• Lang lewensduur: Engineered for 50,000+ hours of operation, reducing maintenance.
• Duursame konstruksie: Advanced aluminum design for heat dissipation and shatterproof build.
• Maklike installasie: Dual-end powered, ballast bypass required.
• Verenigbaarheid: Ideal for T8, T10, and T12 fluorescent fixtures.
• Daglig Wit: 5000K color temperature for natural light.

Figure 3.2: Detail of the Single Pin Fa8 Base and 8FT (93.86") length.

Figure 3.3: JESLED LED tubes feature dual-row LEDs for brighter light output compared to single-row designs.

4. Tegniese spesifikasies

5. Installation Instructions (Ballast Bypass, Dual-End Powered)

These JESLED 8FT LED tubes require a ballast bypass installation. This means the existing ballast in your fluorescent fixture must be removed or bypassed, and the fixture rewired to directly supply line voltage aan die lamp holders (tombstones).

Gereedskap benodig:

• Draadsnyers/stropers
• Skroewedraaier
• Draadmoere
• Elektriese band
• Voltage toetser

Installasie stappe:

1. Skakel krag af: Locate the circuit breaker controlling the fixture and turn off the power. Verify with a voltage tester that the power is off before proceeding.
2. Verwyder bestaande fluoresserende buise: Carefully remove the old fluorescent tubes from the fixture.
3. Access the Ballast: Open the fixture to expose the wiring and the ballast.
4. Bypass/Remove Ballast:

   Cut off all wires connected to the ballast. You will typically have a live (black) and neutral (white) wire going into the ballast, and multiple wires (often yellow, red, blue) going from the ballast to the lamp holders (tombstones).

   

   Figure 5.1: Ballast bypass wiring diagram. Connect the live wire to one end of the LED tube and the neutral wire to the other end.

   Connect the live (hot) wire from the main power supply to the wires leading to one end of the fixture's lamp holders. Connect the neutral wire from the main power supply to the wires leading to the other end of the fixture's lamp holders. Use wire nuts to secure all connections and electrical tape for added insulation.

5. Install LED Tubes: Insert the JESLED 8FT LED tubes into the modified fixture. Ensure the single pins are securely seated in the lamp houers.
6. Apply Warning Label: Affix the provided warning label to the fixture to indicate that it has been modified for LED lamps and no longer uses a ballast. This prevents accidental installation of fluorescent lamps in the future.
7. Herstel krag: Close the fixture and turn the power back on at the circuit breaker.

Visuele installasiegids:

6. Bedryfsinstruksies

JESLED 8FT LED Bulbs are designed for simple operation once correctly installed:

• Onmiddellik aan: These LED tubes provide instant illumination with no flickering or warm-up time.
• Nie-dimbaar: These specific models are non-dimmable. Do not attempt to use them with standard dimmer switches, as this may damage the bulbs or the dimmer.
• Optimale prestasie: For best performance, ensure the bulbs are used within their specified voltage range (120-277 Volts).

7. Onderhoud

JESLED LED bulbs require minimal maintenance due to their long lifespan and durable construction.

• Skoonmaak: Ensure power is off before cleaning. Gently wipe the tubes with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Inspeksie: Periodically inspect the tubes and wiring for any signs of damage or loose connections. Address any issues promptly.
• Lewensduur: With an average lifespan of 50,000 hours, these bulbs are designed to last over 5 years with typical use, significantly reducing the frequency of replacements.

8. Probleemoplossing

If you encounter issues with your JESLED LED bulbs, refer to the following common problems and solutions:

9. Waarborg en Ondersteuning

JESLED provides a 3-year unlimited customer service warranty for these LED bulbs. If you are not satisfied with your product or encounter any issues, please contact JESLED customer support for assistance.

For support, please refer to the contact information provided with your product packaging or visit the official JESLED webwebwerf.