Inleiding
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Veiligheidsinligting
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- WAARSKUWING: Risiko van elektriese skok. Ontkoppel krag by die lont of stroombreker voor installering of diens.
- WAARSKUWING: Risk of fire. Use only in circuits rated for the fixture.
- Raadpleeg 'n gekwalifiseerde elektrisiën as jy onseker is oor die installasieproses.
- Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
- Maak seker dat alle verbindings veilig en behoorlik geïsoleer is.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Wat is in die boks
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Monteer hardeware
- Afstandbeheer (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Opstelling (Installasie)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Skakel krag af: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage toetser.
- Berei montage-oppervlak voor: Maak seker dat die elektriese boks stewig gemonteer is en die gewig van die toebehore kan ondersteun.
- Koppel drade: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Monteer bevestiging: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Herstel krag: Sodra die toebehore stewig geïnstalleer is, herstel die krag by die stroombreker.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Bedryfsinstruksies
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Skakel aan/af: Draai die muurskakelaar wat aan die armatuur gekoppel is om die lig aan of af te skakel.
- Energiedoeltreffendheid: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Onderhoud
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Skoonmaak: Maak seker dat die krag afgeskakel is voor skoonmaak. Gebruik 'n sagte, droë of effens droëamp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED-langslewendheid: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Probleemoplossing
As jy probleme met jou ligte ondervind, raadpleeg die volgende algemene probleme en oplossings:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | No power to the fixture; loose wiring; faulty switch. | Kontroleer die stroombreker. Maak seker dat alle draadverbindings stewig is. Toets die muurskakelaar. |
| Ligte flikkerings. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Liguitset is dof of inkonsekwent. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Die toebehore maak 'n zoemende geluid. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Spesifikasies
- Modelnommer: CLL56-2WW
- Produk afmetings: 7.4 x 7.4 x 1.4 duim
- Gewig: 2.15 Pounds (per pack, total for 2 lights)
- Handelsmerk: Projek Bron
- Kleur: Wit
- Liggaamvorm: Ceiling (Flush Mount)
- Binne/buiteluggebruik: Binne/Buite (Nat Gegradeer)
- Kragbron: Corded Electric (Direct Wire)
- Lig uitset: 730 Lumen
- Kleur temperatuur: 3000K
- Kleurweergawe-indeks (CRI): 90
- Energiegradering: Energy Star
Waarborg en Ondersteuning
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source webwebwerf.