1. Inleiding
Dankie vir die aankoopasing the Soundsation GO-SOUND 10A Active Speaker System. This manual provides essential information for the safe and efficient operation of your new active speakers. Please read it thoroughly before use and retain it for future reference.
The GO-SOUND 10A is a versatile active speaker system featuring a 10-inch woofer, designed for various applications including karaoke, DJ sets, public address (PA) systems, gym sound, and live music performances. Its portable design and robust construction ensure reliable performance.
Figuur 1: Voor- en sykant view of the Soundsation GO-SOUND 10A Active Speaker System, showcasing its portable design and protective grille.
2. Veiligheidsinligting
WAARSKUWING: OM DIE RISIKO VAN BRAND OF ELEKTRIESE SKOK TE VERMINDER, MOENIE HIERDIE APPARAAT AAN REËN OF VOG BLOOTSTEL NIE.
WAARSKUWING: RISIKO VAN ELEKTRIESE SKOK. MOET NIE OOPMAAK NIE.
Hierdie simbool dui die teenwoordigheid van ongeïsoleerde gevaarlike voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
This symbol indicates that important operating and maintenance instructions are included in the literature accompanying this product.
- Kragbron: Koppel die eenheid slegs aan 'n WS-kragaansluiting van die gespesifiseerde volumetage (230V 50Hz). Ensure the power cord is not damaged or pinched.
- Ventilasie: Moenie enige ventilasie-openinge blokkeer nie. Installeer volgens die vervaardiger se instruksies.
- Hitte: Moenie naby enige hittebronne soos verkoelers, hitteregisters, stowe of ander toerusting (insluitend ampversterkers) wat hitte produseer.
- Water en vog: Do not use this apparatus near water. Do not expose to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
- Skoonmaak: Maak slegs skoon met 'n droë lap.
- Diens: Moenie probeer om hierdie produk self te diens nie. Verwys alle diens na gekwalifiseerde dienspersoneel. Diens is nodig wanneer die apparaat op enige manier beskadig is, soos wanneer die kragtoevoerkoord of prop beskadig is, vloeistof gemors is of voorwerpe in die apparaat geval het, die apparaat aan reën of vog blootgestel is, nie normaal werk nie, of laat val is.
3. Opstelling
3.1 Uitpak
Carefully unpack your GO-SOUND 10A speaker system. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3.2 Plasing
The GO-SOUND 10A is designed as a portable speaker and can be placed on a shelf, stand, or any stable, flat surface. Ensure adequate ventilation around the unit to prevent overheating.
3.3 Verbindings
Refer to the rear panel diagram for all input and output connections.
Figuur 2: Gedetailleerd view of the rear panel of the Soundsation GO-SOUND 10A, showing all input, output, and control elements.
- MIC/LINE IN (VOL 1): This input accepts both XLR and 1/4" Jack connectors. Use it for microphones or line-level audio sources. Adjust its volume with the VOLG 1 knop.
- LINE IN (VOL 2): This input accepts RCA (L/R) and XLR connectors. Use it for line-level audio sources such as mixers, media players, or instruments. Adjust its volume with the VOLG 2 knop.
- MENG UIT: An XLR output that provides a mixed signal of all inputs. Use this to connect to another active speaker or an external amplewendiger.
- EQ (HOOG/LAAG): These knobs allow you to adjust the treble (HIGH) and bass (LOW) frequencies of the overall sound output.
- KRAG-LED: Verlig wanneer die eenheid aangeskakel is.
- KLIP LED: Illuminates when the input signal is too strong, indicating potential distortion. Reduce the input volume if this LED lights up frequently.
- WS-INSET: Connect the provided power cable here. Ensure the voltage matches your local power supply (230V 50Hz). The fuse rating is T1.0A/250V.
- Krag skakelaar: Skakel die eenheid AAN of AF.
4. Bedryfsinstruksies
4.1 Aan-/afskakel
- Ensure all volume knobs (VOL 1, VOL 2) are set to their minimum position before powering on.
- Connect the power cable to the AC INPUT and then to a suitable power outlet.
- Draai die KRAG switch to the 'ON' position. The KRAG-LED sal verlig.
- To power off, set all volume knobs to minimum, then flip the KRAG switch to 'OFF'.
4.2 Adjusting Volume and EQ
Verhoog die geleidelik VOLG 1 en/of VOLG 2 knobs to achieve the desired sound level. Use the HOOG en LAAG EQ knobs to fine-tune the treble and bass frequencies to suit your preference or the acoustics of the room. If the KLIP LED flashes frequently, reduce the input volume from your source or the corresponding VOL knob to prevent distortion.
4.3 Stereo Pairing
The GO-SOUND 10A supports stereo pairing. To achieve a stereo setup, you will need two GO-SOUND 10A units. Connect the MIX OUT of one speaker to the LINE IN (XLR) of the second speaker. Ensure your audio source is connected to the first speaker. This configuration allows for a wider and more immersive sound experience.
4.4 Aanbevole gebruik
This active speaker system is suitable for a variety of applications:
- Karaoke: Connect microphones and music sources for vocal performances.
- DJ Sets: Ideal for small to medium-sized events, providing clear and powerful sound.
- Pubs & Gyms: Excellent for background music or announcements.
- Live Music: Can be used as a main PA speaker or a monitor for small bands and solo artists.
5. Onderhoud
5.1 Skoonmaak
To clean the speaker cabinet, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged from the power source before cleaning.
5.2 Berging
When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for storage and transport.
6. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| No power, POWER LED is off. | Power cable not connected or faulty. Power switch is off. No power from outlet. | Check power cable connection. Ensure power switch is ON. Test outlet with another device. Check fuse (T1.0A/250V). |
| Geen klankuitset nie. | Volume knobs are at minimum. Input source not connected or faulty. Cables are incorrect or damaged. | Increase VOL 1/VOL 2. Check input source and its volume. Verify all audio cables are correctly connected and functional. |
| Distorted sound, CLIP LED flashes. | Input signal is too high. | Reduce the volume from your audio source or the corresponding VOL knob on the speaker until the CLIP LED no longer flashes frequently. |
| Zoemende of bruisende geluid. | Ground loop issue. Faulty cables. Interference from other electronic devices. | Ensure all equipment is on the same power circuit. Try different cables. Move speaker away from other electronic devices. |
7. Spesifikasies
- Handelsmerk: Klanktoon
- Model Naam: GO-SOUND 10A
- Tipe luidspreker: Active, Portable
- Woofer deursnee: 10 duim
- Maksimum uitsetkrag: 480 watt
- Verbindingstegnologie: RCA, XLR, 1/4" Jack
- Klankuitsetmodus: Stereo
- Spesiale kenmerk: Stereopaar
- Aanbevole gebruike: Karaoke, DJ, Pub, Gyms, Live Music
- Versoenbare toestelle: Home theater system, Projector, Television
- Kragtoevoer: Wired (AC 230V 50Hz)
- Sekeringgradering: T1.0A/250V
- Gewig: 22550 Grams (approx. 22.55 kg)
8. Waarborg en ondersteuning
8.1 Beperkte waarborg
This Soundsation GO-SOUND 10A speaker system comes with a limited warranty. Please refer to the warranty card included with your purchase or contact your local dealer for specific terms and conditions. The warranty typically covers manufacturing defects under normal use.
8.2 Kliëntediens
For technical assistance, service, or any questions regarding your Soundsation GO-SOUND 10A, please contact your authorized Soundsation dealer or visit the official Soundsation website for support resources. Please have your product model and purchase information ready when contacting support.