JESLED T8 LED 4FT Type A+B Light Bulbs Instruction Manual

1. Inleiding

This manual provides detailed instructions for the safe installation, operation, and maintenance of JESLED T8 LED 4FT Type A+B Light Bulbs. These bulbs are designed as energy-efficient replacements for traditional fluorescent tubes, offering high brightness and a long lifespan. Please read this manual thoroughly before installation and retain it for future reference.

2. Wat is in die boks

• 4-Pack LED Tube Lights

3. Spesifikasies

4. Veiligheidsinligting

• WAARSKUWING: ELECTRICITY CAN BE DEADLY IF PROPER PROCEDURES ARE NOT FOLLOWED. Ensure power is OFF at the circuit breaker before any installation or maintenance.
• Always consult a qualified electrician if you are unsure about any wiring procedures.
• Hierdie gloeilampe is nie-dimbaar. Moenie met dimmerskakelaars gebruik nie.
• Do not install in fixtures with incompatible ballasts. Refer to the ballast compatibility list.
• Handle bulbs with care. Although shatterproof, excessive force can cause damage.
• Do not expose to super wet environments. Designed for indoor use.

5. Installasie

JESLED T8 LED bulbs offer versatile installation options. Always ensure power is OFF at the circuit breaker before beginning installation.

5.1. Produk verbyview

A single JESLED T8 LED 4FT Type A+B light bulb, highlighting its bi-pin base and internal LED strip.

'n Gedetailleerde view of the JESLED LED tube, highlighting its clear lighting, energy-efficient LED components, and robust aluminum-plastic construction for long-lasting performance.

5.2. Installation Methods (Type A+B)

These bulbs support both Plug & Play (with ballast) and Ballast Bypass (without ballast) installations. They are also compatible with single or double-ended powered connections.

A comprehensive diagram illustrating Type A+B installation methods for JESLED T8 4-foot LED light bulbs, covering both Plug & Play with ballast and Ballast Bypass (double-ended and single-ended) configurations.

5.2.1. Plug & Play (Type A - With Ballast)

1. Ensure the existing fluorescent fixture has a compatible ballast. Refer to the Ballasversoenbaarheidslys hieronder.
2. Skakel die krag na die toebehore by die stroombreker af.
3. Remove the old fluorescent tube.
4. Insert the JESLED T8 LED tube into the fixture's sockets. Ensure the pins are correctly aligned and twisted into place.
5. Herstel krag en toets die lig.

5.2.2. Ballast Bypass (Type B - Without Ballast)

This method requires modifying the fixture's wiring to bypass or remove the ballast. It is recommended that this procedure be performed by a licensed electrician or individuals with sufficient electrical knowledge.

1. Skakel die krag na die toebehore by die stroombreker af.
2. Remove the old fluorescent tube and the fixture cover.
3. Locate and disconnect the ballast from the fixture's wiring. Remove the ballast completely.
4. Rewire the fixture according to the diagram for Ballast Bypass (Type B) shown above. Connect the incoming AC power directly to the lamp holders (tombstones).
5. For dual-ended powered bulbs, connect the live (hot) wire to the pins on one end of the tube and the neutral wire to the pins on the opposite end.
6. For single-ended powered bulbs, connect both live (hot) and neutral wires to the pins on one end of the tube.
7. Ensure all connections are secure and insulated. Replace the fixture cover.
8. Insert the JESLED T8 LED tube into the fixture's sockets.
9. Herstel krag en toets die lig.

5.3. Ballast Compatibility List (for Plug & Play)

A list of compatible ballasts for JESLED T8 LED tubes, advising users to check compatibility before purchase and recommending installation by a licensed electrician if bypassing the ballast.

5.4. Installasievideogids

6. Bedryfsinstruksies

Once properly installed, JESLED T8 LED bulbs provide instant-on illumination without flickering or buzzing. Simply use the existing light switch to turn the lights on or off. These bulbs are non-dimmable.

7. Onderhoud

JESLED T8 LED bulbs are designed for long-term, low-maintenance operation with a lifespan of over 50,000 hours.

• Skoonmaak: Ensure power is off before cleaning. Gently wipe the bulb with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Vervanging: Due to their extended lifespan, frequent replacement is not anticipated. If a bulb needs replacement, follow the installation steps in Section 5.

8. Probleemoplossing

• Gloeilamp brand nie:
  1. Check if the power is on at the circuit breaker and the light switch.
  2. Ensure the bulb is securely seated in the lamp holders (tombstones) and the pins are correctly aligned.
  3. If using Plug & Play, verify the ballast is compatible and functioning correctly.
  4. If using Ballast Bypass, re-check all wiring connections according to the diagram. Ensure live and neutral wires are correctly connected to the appropriate ends of the bulb.
• Flikkerende of inkonsekwente lig:
  1. If using Plug & Play, the ballast might be incompatible or failing. Consider bypassing the ballast or replacing it with a compatible one.
  2. Verseker 'n stabiele kragtoevoer na die toestel.
• Smoking or burning smell:
  1. Skakel die krag onmiddellik by die stroombreker af.
  2. This indicates a serious electrical issue. Do not attempt to fix it yourself. Contact a qualified electrician immediately.

9. Waarborg en ondersteuning

JESLED T8 LED Light Bulbs are protected by a comprehensive 3-Year Protection plan. For any technical support, warranty claims, or inquiries, please contact JESLED customer service directly through the Amazon messaging system. Our team is committed to providing reliable assistance.