Telwin 807591 Touring 11 Battery Charger 6/12V User Manual

1. Inleiding

The Telwin Touring 11 is an advanced battery charger designed for various types of accumulators, including WET, GEL, Pb-Ca, AGM, MF, and EFB, operating at both 6V and 12V. It features electronic control of charging phases, automatic interruption, and resumption (TRONIC system) to ensure optimal and safe charging. The unit provides clear LED indicators for battery charge status and incorporates multiple safety protections.

2. Veiligheidsinligting

Please read and understand all safety instructions before operating the battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always operate the charger in a well-ventilated area.
• Moenie die laaier aan reën of oormatige vog blootstel nie.
• Ensure the charger is disconnected from the mains power before making or breaking connections to the battery.
• Vermy die laai van bevrore batterye.
• Wear appropriate eye protection and clothing when working with batteries.
• Hou buite bereik van kinders.
• Hierdie toestel is nie bedoel vir gebruik deur persone (insluitend kinders) met verminderde fisiese, sensoriese of geestelike vermoëns, of 'n gebrek aan ervaring en kennis nie, tensy hulle toesig of instruksies oor die gebruik van die toestel gegee is deur 'n persoon wat verantwoordelik is vir hul veiligheid.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• Telwin Touring 11 Battery Charger unit
• Kragkabel
• Battery connection clamps (rooi en swart)
• Gebruikershandleiding (hierdie dokument)

4. Produkkenmerke

The Telwin Touring 11 Battery Charger offers the following key features:

• TRONIC System: Electronic control of charging phases with automatic interruption and resumption.
• Veelsydige laai: Suitable for WET, GEL, Pb-Ca, AGM, MF, EFB battery types.
• Dubbel Voltage: Charges 6V and 12V batteries.
• LED-aanwysers: Clear display of battery charge status (MIN, 25%, 50%, 75%, MAX).
• Veiligheidsbeskermings: Built-in protection against overloads, polarity inversions, and automatic battery voltage erkenning.
• Kompakte ontwerp: Lightweight and compact for easy handling and storage.
• Geïntegreerde berging: Practical rear compartment for cables and clamps.

Figure 4.1: Telwin Touring 11 Battery Charger with its included red and black battery clamps.

5. Opstelling

1. Pak die laaier uit: Carefully remove the battery charger and all accessories from the packaging.
2. Inspekteer vir skade: Check the charger and cables for any signs of damage. Do not use if damaged.
3. Ventilasie: Place the charger in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
4. Batteryvoorbereiding: Ensure the battery to be charged is clean and free of corrosion on its terminals. If it's a WET battery, check the electrolyte levels and top up with distilled water if necessary, ensuring proper ventilation during charging.

Figuur 5.1: Bo view of the Telwin Touring 11 Battery Charger, highlighting the control panel and fuse location.

6. Bedryfsinstruksies

1. Koppel aan battery:
   • Koppel die rooi (+) clamp na die positiewe terminaal van die battery.
   • Koppel die swart (-) clamp na die negatiewe aansluiting van die battery.
   • Maak seker dat verbindings stewig en vry van korrosie is.
2. Kies Voltage: Gebruik die voltage selection switch on the charger's front panel to choose between 6V or 12 V, matching the voltage of the battery you are charging.
3. Koppel aan die hoofstroom: Plug the charger's power cable into a 230V AC mains outlet.
4. Laai proses:
   • The charger will automatically detect the battery and begin the charging process (TRONIC system).
   • The LED indicators (MIN, 25%, 50%, 75%, MAX) will illuminate sequentially to show the current charge status of the battery.
   • Once the battery is fully charged, the "MAX" LED will remain steadily lit, and the charger will automatically switch to maintenance mode or stop charging to prevent overcharging.
5. Ontkoppel tans:
   • First, disconnect the charger from the mains power outlet.
   • Ontkoppel dan die swart (-) clamp vanaf die battery se negatiewe terminaal.
   • Finally, disconnect the rooi (+) clamp vanaf die battery se positiewe terminaal.

Figure 6.1: Close-up of the 6V/12V voltage selector switch on the Telwin Touring 11 charger.

7. Onderhoud

• Skoonmaak: Disconnect the charger from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• Kabel en Clamp Inspeksie: Regularly inspect the power cable and battery clamps vir enige tekens van skade, rafelvorming of korrosie. Vervang beskadigde komponente onmiddellik.
• Berging: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Utilize the rear compartment for cable and clamp berging.
• Sekering vervanging: The charger is equipped with a 5A mains fuse. If the charger fails to power on, check and replace the fuse if necessary. Ensure to use a fuse of the correct rating (5A).

8. Probleemoplossing

9. Spesifikasies

10. Waarborginligting

Specific warranty details for the Telwin Touring 11 Battery Charger may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed information regarding warranty coverage, terms, and conditions. Keep your proof of purchase for warranty claims.

11. Ondersteuning

For technical assistance, spare parts, or further inquiries, please contact Telwin customer support or visit the official Telwin website. Contact information can typically be found on the product packaging or on the manufacturer's webwebwerf.

Telwin Official Webwebwerf: www.telwin.com