Flexispot EB2B Electric Height-Adjustable Desk Frame User Manual

1. Inleiding

Thank you for choosing the Flexispot EB2B Electric Height-Adjustable Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk frame. Please read this manual thoroughly before installation and keep it for future reference.

Image: The Flexispot EB2B desk frame supporting a complete desk setup, highlighting its dual-motor design.

2. Veiligheidsinligting

Om veilige werking te verseker en skade te voorkom, neem asseblief die volgende veiligheidsmaatreëls in ag:

• Maak seker dat alle komponente stewig vasgemaak is voor gebruik.
• Moenie die maksimum gewigskapasiteit van 100 kg (220 lbs) oorskry nie.
• Hou kinders en troeteldiere weg van die lessenaar tydens gebruik om beserings deur bewegende dele te voorkom.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to prevent damage, but manual vigilance is always recommended.
• Do not disassemble or modify the desk frame or its electrical components. Contact qualified personnel for repairs.
• Ontkoppel die kragtoevoer voordat u skoonmaak of enige onderhoud uitvoer.

Image: Visual representation of the anti-collision system, showing the desk rebounding upon detecting an obstruction.

3. Pakketinhoud

Maak asseblief seker dat alle onderdele teenwoordig is voordat u met die montering begin:

• Lessenaarpote (2)
• Voete (2)
• Dwarsbalk (1)
• Syhakies (2)
• Beheerkas (1)
• Handset/Control Panel (1)
• Kragadapter (1)
• Kragkoord (1)
• Cable Management Clips (4)
• Assembly Hardware (screws, Allen keys, etc.)

Image: All main components of the Flexispot EB2B desk frame, including the dual legs, crossbar, and control panel.

4. Opstelling en samestelling

Follow these steps to assemble your Flexispot EB2B desk frame. It is recommended to have two people for assembly.

1. Berei die area voor: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Heg voete aan bene vas: Securely attach the feet to the bottom of each desk leg using the provided screws.
3. Monteer die dwarsbalk: Connect the two desk legs to the adjustable crossbar. Ensure the crossbar is extended to the desired width to accommodate your tabletop (Min: 110cm, Max: 180cm).
4. Installeer syhakies: Attach the side brackets to the top of the desk legs, which will support your tabletop.
5. Monteer die beheerkas: Secure the control box to the designated area under the crossbar.
6. Koppel kabels: Connect the motor cables from each leg to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box and the power cord to the adapter.
7. Heg tafelblad aan: Carefully place your tabletop (not included) onto the assembled frame. Ensure it is centered and aligned. Secure the tabletop to the frame using appropriate screws (ensure screws are not too long to penetrate the tabletop surface). The frame is compatible with tabletops from 110 cm to 180 cm wide and 50 cm to 80 cm deep.
8. Kabelbestuur: Use the provided cable management clips to organize and secure all cables, preventing them from dangling or getting caught.

Image: A diagram illustrating the adaptable desktop sizes (width and depth) that the Flexispot EB2B desk frame can accommodate.

5. Bedryfsinstruksies

The Flexispot EB2B features a user-friendly control panel for height adjustment and memory functions.

5.1. Basiese Hoogteverstelling

• Lig lessenaar op: Druk en hou die UP (^) button to raise the desk to your desired height.
• Onderste lessenaar: Druk en hou die DOWN (v) button to lower the desk to your desired height.
• The LED display will show the current height in centimeters. The desk operates smoothly and quietly, with a noise level below 50 dB and a lifting speed of 3.2 cm/sec.

5.2. Geheuevoorinstellings

The control panel allows you to save up to four preferred height settings.

1. Verstel die lessenaar tot die verlangde hoogte met die OP/AF-knoppies.
2. Druk die 'M' button (or 'S' depending on the model) followed by the desired preset number (1, 2, 3 of 4). The display will show 'S-' then the number, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding preset number (1, 2, 3 of 4Die lessenaar sal outomaties na die gestoorde posisie beweeg.

5.3. Sedentary Reminder System

The advanced control panel includes a sedentary reminder system to encourage healthy work habits. Consult your specific control panel's instructions for activating and setting reminder intervals.

5.4. Antibotsingstelsel

The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. You can adjust the sensitivity of this system (refer to the detailed control panel manual for specific steps).

Beeld: 'n Gedetailleerde view of the control panel, showing the LED display, up/down buttons, and four memory preset buttons.

6. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your desk frame.

• Skoonmaak: Vee die lessenaar se raam af met 'n sagte, damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the desk is unplugged before cleaning.
• Inspeksie: Kontroleer gereeld alle skroewe en verbindings om te verseker dat hulle styf vas is. Draai weer vas indien nodig.
• Kabelkontrole: Maak seker dat alle kabels stewig gekoppel en vry van skade is.
• Smering: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by Flexispot support.

7. Probleemoplossing

If you encounter issues with your Flexispot EB2B desk frame, refer to the following common problems and solutions:

7.1. Herstel prosedure

If the desk is not functioning correctly, a reset may resolve the issue:

1. Druk en hou die DOWN (v) button until the desk reaches its lowest position and slightly rebounds. Continue holding for approximately 5-10 seconds until the display shows 'RST' or 'RESET'.
2. Release the button. The desk will then move slightly up and down to calibrate. Once the display shows the lowest height (e.g., 71.0), the reset is complete.

8. Spesifikasies

Image: The Flexispot EB2B frame demonstrating its large height adjustment range (70-119 cm) and anti-collision feature.

9. Waarborg en Ondersteuning

Flexispot stands behind the quality of its products.

• Raamwaarborg: The desk frame is covered by a 5 jaar waarborg.
• Motor and Controller Warranty: The motors and controllers are covered by a 3 jaar waarborg.

For warranty claims, technical support, or any questions not covered in this manual, please contact Flexispot customer service through their official website or your point of purchase. Please have your model number (EB2B) and purchase information ready.

Image: Visual representation of the warranty terms: 5 years for the desk frame and 3 years for controllers and motors.