PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Inleiding

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Veiligheidsinstruksies

Lees en verstaan ​​asseblief alle veiligheidsinstruksies voordat u die toestel gebruik. Versuim om hierdie instruksies te volg, kan lei tot blootstelling aan laserstraling, elektriese skok, brand of ernstige besering.

• Laserveiligheid: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Batteryveiligheid: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Bedryfsomgewing: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Onderhoud: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• PeakTech P 2800A Laser Distance Meter
• Riem sak
• 2 x 1.5V AAA Alkaliese Batterye
• User Manual (German and English)
• Kalibrasie bevestiging

4. Toestel oorview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Figuur 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Figuur 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Figuur 3: Close-up view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Figuur 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• EENHEID: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Verwysingspuntknoppie: Changes the measurement reference point (front, rear, flip-out stop).
• Geheue-knoppie: Kry toegang tot gestoorde metings.
• Agterlig-knoppie: Toggles display backlight.
• LCD-skerm: Multi-line display showing current measurements, previous results, and function icons.

5. Opstelling

5.1 Battery installasie

1. Vind die batteryklepdeksel aan die agterkant van die toestel.
2. Skuif of knip die deksel los om die kompartement oop te maak.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. Maak die batterykompartement se deksel stewig toe.

The device will automatically power on or can be powered on by pressing the MEAS knoppie.

6. Bedryfsinstruksies

6.1 Krag aan/af

• Krag aan: Druk die MEAS knoppie.
• Skakel af: Druk en hou die AF/VEER button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Verandering van meeteenhede

Druk die EENHEID button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Instelling van die verwysingspunt

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Verwysingspunt button to switch between these options. The current reference point is indicated on the display.

6.4 Enkele Afstandsmeting

1. Rig die laser op die teiken.
2. Druk die MEAS druk die knoppie een keer om die laser te aktiveer.
3. Druk die MEAS button again to take the measurement. The result will be displayed.

6.5 Deurlopende meting (min/maks)

1. Druk en hou die MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Druk MEAS weer om deurlopende meting te stop.

6.6 Oppervlaktemeting

1. Druk die Oppervlakte/volume button once to enter area measurement mode. An icon for area will appear on the display.
2. Meet die eerste kant (bv. lengte) deur te druk MEAS.
3. Meet die tweede kant (bv. breedte) deur te druk MEAS.
4. Die berekende area sal vertoon word.

6.7 Volumemeting

1. Druk die Oppervlakte/volume button twice to enter volume measurement mode. An icon for volume will appear.
2. Meet die lengte deur te druk MEAS.
3. Meet die breedte deur te druk MEAS.
4. Meet die hoogte deur te druk MEAS.
5. Die berekende volume sal vertoon word.

6.8 Pythagorese Meting (Indirekte Meting)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Druk die Pythagoras button to select the desired indirect measurement mode.
2. Volg die aanwysings op die skerm om die vereiste metings te neem (bv. skuinssy, basis).
3. The device will calculate and display the unknown height or distance.

6.9 Optelling en Aftrekking

Nadat jy 'n meting geneem het, kan jy daaropvolgende metings byvoeg of aftrek:

1. Neem 'n meting.
2. Druk die + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Herhaal soos nodig.

6.10 Geheue funksie

The device can store up to 99 measurement values.

• Winkel: Measurements are automatically stored.
• Onthou: Druk die Geheue knoppie om view stored values. Use the + en - buttons to scroll through the memory.
• Vee geheue uit: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Onderhoud

• Skoonmaak: Gebruik 'n sagte, damp lap om die toestel skoon te maak. Moenie skuurmiddels of oplosmiddels gebruik nie. Maak die laserlens versigtig skoon met 'n sagte lap, soortgelyk aan die skoonmaak van kameralense.
• Berging: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Battery vervanging: Vervang batterye wanneer die lae battery-aanwyser op die skerm verskyn.

8. Probleemoplossing

9. Spesifikasies

10. Waarborg en Ondersteuning

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webwebwerf of kontak hul kliëntediensafdeling.