VITEK VT-1607 ST-I

VITEK VT-1607 ST-I 500 Watt Centrifugal Juicer Instruction Manual

Model: VT-1607 ST-I

Inleiding

Thank you for choosing the VITEK VT-1607 ST-I Centrifugal Juicer. This appliance is designed to efficiently extract juice from various fruits and vegetables, providing fresh and healthy beverages. Please read this manual carefully before operating the juicer to ensure safe and proper use, and retain it for future reference.

Belangrike veiligheidsinligting

Volg altyd basiese veiligheidsmaatreëls wanneer u elektriese toestelle gebruik om die risiko van brand, elektriese skok en persoonlike besering te verminder.

  • Lees alle instruksies voor gebruik.
  • Verseker die voltage wat op die toestel aangedui word, stem ooreen met u plaaslike netvoedingtage voor aansluiting.
  • Moenie die motoreenheid, koord of prop in water of ander vloeistowwe dompel nie.
  • Ontkoppel die toestel uit die stopcontact wanneer dit nie gebruik word nie, voordat u onderdele aanmekaarsit of uitmekaar haal, en voordat u skoonmaak.
  • Avoid contact with moving parts. Ensure the appliance is properly assembled before operation.
  • Moenie enige toestel gebruik met 'n beskadigde koord of prop, of nadat die toestel wanfunksioneer of op enige manier beskadig is nie.
  • Moenie buite gebruik nie.
  • Keep hands and utensils away from the feed chute during operation to prevent injury.
  • Always use the food pusher provided. Never push food with your fingers or other objects.
  • Ensure the safety locking arm is securely in place before operating the juicer.
  • Hierdie toestel is nie bedoel vir gebruik deur persone (insluitend kinders) met verminderde fisiese, sensoriese of geestelike vermoëns, of 'n gebrek aan ervaring en kennis nie, tensy hulle toesig of instruksies oor die gebruik van die toestel gegee is deur 'n persoon wat verantwoordelik is vir hul veiligheid.

Produkkomponente

Familiarize yourself with the parts of your VITEK VT-1607 ST-I Centrifugal Juicer.

VITEK VT-1607 ST-I Centrifugal Juicer assembled

Figure 1: Fully assembled VITEK VT-1607 ST-I Centrifugal Juicer with juice cup and pulp container.

  • Motor Eenheid: The base of the juicer containing the motor and control knob.
  • Voergleuf: Opening where fruits and vegetables are inserted.
  • Kosstooter: Used to guide food down the feed chute.
  • Lid/Cover: Transparent cover that secures the feed chute and directs juice.
  • Stainless Steel Grater cum Filter: The central component that grates and separates juice from pulp.
    Close-up of the VITEK juicer's stainless steel grater cum filter

    Figuur 2: Gedetailleerd view of the high-grade stainless steel grater cum filter.

  • Pulphouer: Collects the separated pulp. Capacity: 1.5 liters.
  • Juice Cup with Foam Separator: Collects the extracted juice. Capacity: 800 ml. Features a lid cover and partition for uniform juice pouring and foam separation.
    VITEK juicer with separate juice cup and pulp container

    Figure 3: Separate containers for juice and pulp, including the 800ml juice cup.

  • Anti-drip System: Prevents juice from dripping after extraction.
    Close-up of the VITEK juicer's anti-drip spout

    Figure 4: The anti-drip system prevents spills and keeps your counter clean.

  • Veiligheidssluitarm: Secures the lid and ensures the juicer operates only when correctly assembled.

Opstelling en samestelling

Before first use, wash all detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm soapy water, rinse thoroughly, and dry.

  1. Plaas die motoreenheid op 'n stabiele, plat en droë oppervlak.
  2. Plaas die pulphouer in sy aangewese posisie op die motoreenheid.
  3. Carefully place the stainless steel grater cum filter onto the motor unit's shaft, ensuring it is seated firmly.
  4. Position the juicer cover/lid over the filter and pulp container, aligning it correctly with the motor unit.
  5. Engage the safety locking arm by lifting it and securing it into the grooves on the lid. The juicer will not operate unless the locking arm is correctly engaged.
  6. Plaas die sapbeker onder die sap tuit.
  7. Plaas die kosstoot in die voergeut.

Bedryfsinstruksies

Follow these steps to extract juice efficiently.

  1. Ensure the juicer is properly assembled and the safety locking arm is secured.
  2. Wash fruits and vegetables thoroughly. For larger items, cut them into pieces that fit the feed chute. Remove hard pits from fruits like peaches or plums. Peeling is generally not necessary for most fruits and vegetables, but you may peel citrus fruits.
  3. Plaas die sapbeker onder die sap tuit.
  4. Steek die kragsnoer in 'n geskikte elektriese aansluiting.
  5. Turn the control knob to the desired speed setting:
    • Spoed 1 (Laag): Suitable for soft fruits and vegetables (e.g., tomatoes, grapes, berries).
    • Spoed 2 (Hoog): Suitable for hard fruits and vegetables (e.g., carrots, apples, celery).
  6. Once the motor is running, gradually feed the prepared fruits and vegetables into the feed chute using the food pusher. Apply gentle, even pressure. Do not force food into the chute.
  7. The juice will flow into the juice cup, and the pulp will collect in the pulp container. The unique juice jar is equipped with a foam separator for clearer juice.
  8. When finished juicing, turn the control knob to the "OFF" position and unplug the appliance from the power outlet.
  9. Activate the anti-drip system by pushing the spout upwards to prevent any remaining juice from dripping.

Onderhoud en Skoonmaak

Gereelde skoonmaak verseker die lang lewensduur en higiëniese werking van jou sapmasjien.

  1. Ontkoppel altyd die sapmasjien van die kragtoevoer voordat u dit skoonmaak.
  2. Demonteer die sapmasjien deur dit los te maakasing the safety locking arm, removing the lid, filter, pulp container, and juice cup.
  3. Rinse all detachable parts immediately after use under running water to prevent pulp from drying and sticking.
  4. Wash the detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm, soapy water. Use a brush to clean the fine mesh of the stainless steel filter thoroughly.
  5. Note: The product is NOT dishwasher safe. Please wash all parts by hand.
  6. Vee die motoreenheid af met adamp lap. Moet nooit die motoreenheid in water of enige ander vloeistof dompel nie.
  7. Droog alle dele deeglik voordat dit weer aanmekaargesit of gestoor word.

Probleemoplossing

If you encounter issues with your juicer, refer to the following common problems and solutions.

  • Sapmasjien skakel nie aan nie:
    • Kontroleer of die kragkabel stewig by die uitlaat ingeprop is.
    • Ensure the safety locking arm is fully engaged and locked into position. The juicer has a safety mechanism that prevents operation if not properly assembled.
  • Low juice yield or excessive pulp:
    • Ensure you are using the correct speed setting for the type of fruit or vegetable. Use higher speed for harder produce.
    • Feed produce slowly and apply gentle, even pressure with the food pusher.
    • The filter may be clogged. Clean the stainless steel filter thoroughly.
  • Juicer stops during operation:
    • The juicer may have overheated due to continuous use or overloading. Turn off the juicer, unplug it, and allow it to cool down for at least 30 minutes before resuming.
    • Check for blockages in the feed chute or filter. Clear any obstructions.
  • Oormatige vibrasie of geraas:
    • Ensure all parts are correctly assembled and securely locked.
    • Check if the juicer is placed on a stable, flat surface.

Indien die probleem voortduur, kontak asseblief kliëntediens.

Spesifikasies

HandelsmerkSLIM
ModelVT-1607 ST-I
Maksimum krag500 Watt
Tipe kragbronElektries met koord
Tipe beheerderKnoppie
MateriaalVlekvrye staal
Voltooi TipeVlekvrye staal
Juice Cup Capacity800 milliliter
Pulphouerkapasiteit1.5 liter
Item gewig2.75 kilogram
Spesiale kenmerkeHigh Grade Stainless Steel grater cum filter, Unique 800ml juice jar with lid and foam separator, Stainless steel body, Anti-drip system, Detachable parts for easy cleaning, Safety lock.
Skottelgoedwasser veiligNee
Ingesluit komponenteJuicer, Accessories, User manual with Warranty Card

Waarborg en kliëntediens

Your VITEK VT-1607 ST-I Centrifugal Juicer comes with a manufacturer's warranty and dedicated customer support.

  • Waarborg: 2-year warranty provided by the manufacturer from the date of purchase. Please retain your purchase receipt for warranty claims.
  • Kliëntesorg: For any queries, service requests, or support, please contact VITEK customer care.
  • Vervaardiger / invoerder: SPG INDIA PVT LTD., Gala No. F 105 & 106, Gundavli, Krishna Complex, Bhiwandi.
VITEK Customer Support Contact Information

Figure 5: VITEK Customer Support details for after-sales service.

© 2026 VITEK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.