Sentry BT900

Sentry BT900 On-Neck Bluetooth Headphones User Manual

Inleiding

This manual provides instructions for the Sentry BT900 On-Neck Bluetooth Headphones. It covers setup, operation, maintenance, and troubleshooting to ensure proper use of your wireless audio device.

Pakketinhoud

Verifieer dat die volgende items in u produkpakket ingesluit is:

  • Sentry BT900 On-Neck Bluetooth Headphones
  • USB-laaikabel
  • Assorted Ear Tips
  • Gebruikershandleiding

Produk verbyview

Familiarize yourself with the components of your Sentry BT900 headphones.

Sentry BT900 On-Neck Bluetooth Headphones showing the neckband and earbuds

The image displays the Sentry BT900 headphones, featuring a flexible neckband designed for comfortable wear. The earbuds are connected to the neckband, and control buttons are typically located on one side of the neckband for easy access.

Sleutelkomponente:

  • Aan/af-/Multifunksie-knoppie: Used for powering on/off, play/pause, answering/ending calls.
  • Volume op/Volgende snit-knoppie: Increases volume, skips to the next track.
  • Volume Verlaag/Vorige Liedjie Knoppie: Decreases volume, skips to the previous track.
  • Mikro-USB laaipoort: Vir die koppeling van die laaikabel.
  • LED-aanwyser: Wys krag-, laai- en paringsstatus.
  • Mikrofoon: Vir handvrye oproepe.

Laai die oorfone

Before initial use, fully charge the headphones.

  1. Connect the small end of the USB charging cable to the Micro-USB port on the headphones.
  2. Koppel die groter punt van die USB-laaikabel aan 'n USB-kragbron (bv. rekenaar se USB-poort, USB-muuradapter).
  3. The LED indicator will illuminate during charging and change color or turn off when charging is complete.
  4. 'n Volle lading neem gewoonlik ongeveer 2-3 uur.

Bind saam met 'n Bluetooth-toestel

Follow these steps to connect your headphones to a Bluetooth-enabled device:

  1. Ensure the headphones are turned off and fully charged.
  2. Druk en hou die Krag/Multi-funksie knoppie for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. Navigeer na die Bluetooth-instellings op jou Bluetooth-geaktiveerde toestel (slimfoon, tablet, ens.).
  4. Aktiveer Bluetooth en soek vir beskikbare toestelle.
  5. Select 'Sentry BT900' from the list of found devices.
  6. Sodra dit gekoppel is, sal die LED-aanwyser op die oorfone tipies stadig blou flikker of konstant blou word.
  7. If a passcode is requested, enter '0000'.

Bedien die oorfone

Krag aan/af:

  • Krag aan: Druk en hou die Krag/Multi-funksie knoppie for 3 seconds. The LED indicator will flash blue.
  • Skakel af: Druk en hou die Krag/Multi-funksie knoppie for 3 seconds. The LED indicator will flash red and then turn off.

Musiek speel:

  • Speel/pouse: Druk die Krag/Multi-funksie knoppie een keer.
  • Volgende snit: Druk en hou die Volume op-knoppie.
  • Vorige snit: Druk en hou die Volume af-knoppie.

Oproepbestuur:

  • Beantwoord/beëindig oproep: Druk die Krag/Multi-funksie knoppie een keer.
  • Verwerp oproep: Druk en hou die Krag/Multi-funksie knoppie vir 2 sekondes.
  • Herbel laaste nommer: Dubbeldruk die Krag/Multi-funksie knoppie.

Volumebeheer:

  • Verhoog volume: Druk die Volume op-knoppie herhaaldelik.
  • Verlaag volume: Druk die Volume af-knoppie herhaaldelik.

Onderhoud

Skoonmaak:

Gently wipe the headphones and earbuds with a soft, dry cloth. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse and dry completely before reattaching.

Berging:

Bêre die oorfone op 'n koel, droë plek weg van direkte sonlig en uiterste temperature. Vermy die plasing van swaar voorwerpe daarop.

Batterysorg:

Om die batterylewe te verleng, vermy om die battery gereeld heeltemal te ontlaai. Laai die oorfone gereeld, selfs al word dit nie vir lang tye gebruik nie.

Probleemoplossing

Oorfone skakel nie aan nie:

Ensure the headphones are fully charged. Connect to a power source and attempt to power on after a few minutes.

Kan nie met toestel koppel nie:

Ensure the headphones are in pairing mode (flashing red and blue LED). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Turn off and on both the headphones and the device, then try pairing again.

Geen geluid of lae volume:

Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired and connected. Try re-pairing the headphones.

Swak klank kwaliteit:

Ensure there are no obstructions between the headphones and your device. Move closer to your device. Check for interference from other wireless devices.

Laai kwessies:

Verify the USB cable is securely connected to both the headphones and the power source. Try a different USB cable or power source.

Spesifikasies

  • Model: BT900
  • Draadlose kommunikasietegnologie: Bluetooth
  • Battery tipe: 1 litiumioon (ingesluit)
  • Item gewig: 2.39 onse
  • Produk afmetings: 8.25 x 1.5 x 6.75 duim
  • Spesiale kenmerke: Microphone Included, Wireless
  • UPC: 080068549000

Waarborg en Ondersteuning

For warranty information, please refer to the documentation included with your purchase or contact Sentry customer support.

Hou jou aankoopbewys vir waarborgeise.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.