1. Inleiding
This manual provides instructions for the Beautyrest 3M Scotchgard Heated Mattress Pad. This electric bed warmer features Secure Comfort technology, designed to minimize Electromagnetic Field emissions. It includes soft, flexible wires and a quilted top for comfort. The fitted skirt accommodates mattresses up to 18 inches thick. Key features include a 10-hour auto shut-off and a 5-setting temperature control. Twin, Twin XL, and Full sizes come with one controller, while Queen, King, and Cal King sizes include two controllers for independent temperature adjustment. The mattress pad is machine washable and UL certified.
Image: Beautyrest 3M Scotchgard Heated Mattress Pad in White, Twin XL size.
2. Veiligheidsinligting
- UL Gesertifiseer: This product is UL certified and independently tested to meet high safety standards.
- Low EMF: Designed with low Electromagnetic Field (EMF) emissions.
- Oorverhittingsbeskerming: Features enhanced safety to prevent overheating.
- Beheerderplasing: Do not leave the controller covered when in use to avoid overheating.
- Kragdrade: Ensure controller and power cords are not pinched or damaged.
- Mattress Pad Condition: Ensure the heated mattress pad is laid flat and not bunched or pinched. Manually twist back any twisted wires.
- Waterweerstand: This product is not water resistant.
- Ouderdomsreeks: Intended for adult use.
Image: Safety features including UL certification, overheating protection, and auto shut-off.
3. Opstelinstruksies
- Pak uit: Carefully remove the heated mattress pad from its packaging.
- Plasing: Lay the mattress pad flat on your mattress. Ensure it is spread evenly without any bunches or twists in the wiring.
- Veilige pas: The fitted skirt is designed to fit mattresses up to 18 inches thick. Stretch the elastic skirt around the corners and sides of your mattress for a snug fit.
- Koppel beheerder: Plug the controller cord into the mattress pad. The controller connectors are positioned on the bottom side of the mattress pad, away from the sleeping surface, to prevent disruptions.
- Kragverbinding: Plug the power cord into a standard 110V-120V @ 60Hz electrical outlet.
- Smart Home Compatibility (Optional): If using with a smart home outlet, ensure the smart outlet is properly set up. The controller can be configured for smart control by pushing and holding the preheat button for 2 seconds until a quick flash occurs.
Image: Demonstrates the deep pocket design fitting mattresses up to 18 inches thick.
Image: Controller connected to a smart outlet for remote operation.
4. Bedryfsinstruksies
4.1. Using the Controller
- Krag aan/af: Press the power button to turn the mattress pad on or off.
- Hitte instellings: Use the "UP" and "DOWN" arrow buttons to select one of the 5 available heat settings.
- Pre-Heat Feature: Press the "PRE-HEAT" button to activate a 1-hour pre-heat cycle, which quickly warms the bed.
- Outo-afskakel: The mattress pad features a 10-hour auto shut-off for safety and energy conservation.
- Dubbele beheerders: Queen, King, and Cal King sizes include two controllers, allowing each user to set their preferred temperature independently.
Image: Close-up of the digital controller with buttons for power, heat adjustment, and pre-heat.
4.2. Smart Home Integration (Optional)
The mattress pad is compatible with smart home outlets and automatic timers. To enable smart control:
- Ensure your smart home outlet is properly configured and connected to your smart home system.
- Plug the mattress pad's power cord into the smart outlet.
- On the mattress pad controller, press and hold the "PRE-HEAT" button for 2 seconds. The indicator light will flash once and then turn off, indicating it's ready for smart control.
- You can now use your smart home system (e.g., voice assistant, app) to turn the smart outlet on, which will activate the mattress pad to its pre-heat setting.
Video: Demonstrates the features of the Beautyrest Heated Microfiber Mattress Pad, including its deep pocket fit, dual controllers, 5 heat settings, 10-hour auto shut-off, 3M Scotchgard treatment, and smart outlet compatibility.
5. Onderhoud
5.1. Wasinstruksies
- Detach Control: Always detach the control unit(s) from the mattress pad before washing.
- Masjienwasbaar: The mattress pad is machine washable. Use cold water on a gentle cycle.
- Droog: Tuimeldroog op lae hitte of lugdroog.
- Moenie stryk nie: Moenie die matrasbeskermer stryk nie.
- 3M Scotchgard Treatment: The 3M Scotchgard treatment helps stains release easily during washing.
Image: Illustrates the machine washable feature, emphasizing detachment of the control unit.
6. Probleemoplossing
- Q: Why is my light blinking?
- A: If an ERROR is detected, the controller display will show an "E" followed by a number, and power to the heating element will not be turned on. Refer to your manual for specific troubleshooting steps for error codes.
- Q: Only parts of my heated mattress pad are getting warm.
- A: This is usually caused by a bunched or pinched heating element. Ensure the mattress pad is laid flat and not tucked in, bunched, or has anything heavy on it. Lay the heated mattress pad flat and run your fingers along the wire, paying special attention to the top and bottom where the wire bends. If any portion of the wire is twisted on itself, manually twist it back.
- V: My beheerder voel warm. Is dit 'n probleem?
- A: No. The control will feel warm (not hot) to the touch when functioning properly. Even when the controller is on, small amounts of electricity will cycle through it, which may make the controller warm. If the controller gets hot to the touch, please contact customer service.
- Q: The mattress pad does not turn on when connected to a smart outlet.
- A: Ensure the controller has been set to "smart control" mode (hold PRE-HEAT for 2 seconds). If the mattress pad automatically shut off after 10 hours, the controller may need to be manually reset or the smart outlet cycled off and on to re-engage the smart control feature.
Video: Shows the controller lights and operation, which can be useful for diagnosing issues like blinking lights or unresponsive buttons.
7. Spesifikasies
| Kenmerk | Detail |
|---|---|
| Handelsmerk | Mooiste |
| Model Naam | 3M Scotchgard Heated Mattress-Pad |
| Modelnommer | BR55-0672 |
| Grootte | Twin XL (39"W x 80"L + 15"D) |
| Materiaal | 100% Polyester Soft Brushed Microfiber with 3M Moisture Management Treatment |
| Kleur | Wit |
| Hitte instellings | 5 |
| Outo-afskakel | 10 ure |
| Spesiale kenmerke | Automatic Shut Off, 3M Scotchgard Treatment, Low EMF, UL Certified, Smart Home Compatible |
| Versorgingsinstruksies | Masjienwasbaar |
| Controller Cord Length | 12 vt |
| Lengte van die kragsnoer | 6 vt |
| Produk afmetings | 80 x 39 x 0.8 duim |
| Item gewig | 4.88 pond |
Image: Diagram illustrating the construction of the heating wire for safety and durability.
8. Waarborg en ondersteuning
8.1. Vervaardiger se waarborg
The Beautyrest 3M Scotchgard Heated Mattress Pad is backed by a 5 jaar vervaardiger se waarborg. This warranty covers defects in materials and workmanship under normal use. For warranty claims or inquiries, please refer to the contact information provided with your product packaging or visit the official Beautyrest webwebwerf.
8.2. Kliëntediens
For further assistance, technical support, or to report any issues not covered in this manual, please contact Beautyrest customer service. Contact details can typically be found on the product packaging or the manufacturer's official webwebwerf.