tectake Set 2 Bar Stools Johannes 401561 - Instruction Manual

Inleiding

This manual provides essential information for the safe assembly, operation, and maintenance of your tectake Set of 2 Bar Stools, Model Johannes 401561. Please read these instructions carefully before use and retain them for future reference.

Veiligheidsinstruksies

To ensure safe use and prevent injury, please observe the following:

• Monteer altyd volgens die verskafde instruksies.
• Do not use on wet or uneven surfaces to prevent tipping.
• This stool is not intended for use by children.
• Always supervise small children when this stool is in use.
• The maximum recommended weight capacity for this stool is 120 kg. Do not exceed this limit.

Pakketinhoud

Voordat u met die montering begin, maak asseblief seker dat alle komponente wat hieronder gelys word, teenwoordig en onbeskadig is:

• 2 x Bar Stools (Johannes Model 401561)
• Assembly Accessories (screws, washers, tools if included)
• Monteringsinstruksies (hierdie handleiding)

Tegniese spesifikasies

Monteer-instruksies

Follow these steps carefully to assemble your bar stools. It is recommended to have two people for assembly to ensure stability and ease of handling.

1. Pak komponente uit: Carefully unpack all components from the packaging. Verify that all parts listed in the 'Package Contents' section are present and free from damage.
2. Heg voetsteun aan: Slide the footrest onto the chrome column. Ensure it is positioned correctly and securely fastened according to the accessory instructions.
3. Plaas gashyser in basis: Place the gas lift cylinder into the central hole of the base plate. The plastic ring on the base plate should be facing downwards to protect your floor.
4. Attach Seat Unit: Carefully place the assembled seat unit onto the top of the gas lift cylinder. Apply gentle pressure until it clicks securely into place.
5. Finale kontrole: Before full use, test the stability of the stool and the functionality of the height adjustment mechanism. Ensure all connections are tight.

Bedryfsinstruksies

Hoogte verstelling

The tectake Johannes bar stool features a gas lift mechanism for smooth height adjustment. The lever is located under the seat on the right side.

• Om die sitplek op te lig: While standing, lift the lever upwards. The gas lift will extend, raising the seat.
• Om die sitplek te laat sak: While seated, lift the lever upwards and apply your weight to compress the gas lift, lowering the seat.

Release the lever to lock the seat at your desired height.

Draai funksie

The seat can rotate 360 degrees, providing flexibility and ease of movement. Simply turn the seat in the desired direction.

Sorg en Onderhoud

Skoonmaak

The faux leather surface and chrome parts are designed for easy cleaning:

• Wipe the faux leather seat with a damp cloth. For more stubborn stains, a mild soap solution can be used.
• Clean chrome parts with a soft, damp lap.
• Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the faux leather and chrome finish.
• Always dry thoroughly after cleaning to prevent water spots or damage.

Algemene Sorg

• Kontroleer gereeld alle skroewe en verbindings om te verseker dat hulle styf vas is. Draai weer vas indien nodig om stabiliteit te handhaaf.
• Avoid exposing the stool to direct sunlight or extreme temperatures for prolonged periods, as this may cause material degradation or fading.
• The plastic ring on the base is designed to protect your floor. Ensure it remains intact and clean to prevent scratches.

Probleemoplossing

If you encounter any issues with your tectake bar stools, please refer to the following common problems and solutions:

Stool feels unstable or wobbly

• Oplossing: Check all assembly connections. Ensure all screws are tightened securely. Verify that the stool is placed on a flat, even surface. Uneven flooring can cause instability.

Hoogteverstelling werk nie

• Oplossing: Ensure the gas lift lever is fully engaged when attempting to adjust the height. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support for assistance.

Piepgeluide tydens gebruik

• Oplossing: Apply a small amount of silicone spray to moving parts, such as the swivel mechanism or the connections around the gas lift cylinder. Avoid using oil-based lubricants on the gas lift itself.

Waarborg en Ondersteuning

For warranty information, technical support, or to inquire about replacement parts, please contact tectake customer service.

You can typically find contact details on the official tektake webwebwerf or through the platform where you purchased the product.

When contacting support, please have your model number (Johannes 401561) and proof of purchase ready to expedite the process.