DAP DRX-18BA
DAP Audio DRX-18BA Aktiewe Subwoofer Gebruikershandleiding
Model: DRX-18BA (D3647)
1. Inleiding
Dankie vir die aankoopasing the DAP Audio DRX-18BA Active Subwoofer. This powerful 18-inch active subwoofer is designed to deliver robust low-frequency sound reinforcement for various professional audio applications. To ensure optimal performance, longevity, and safe operation, please read this manual thoroughly before setup and use. Keep this manual for future reference.
2. Veiligheidsinstruksies
Always observe the following safety precautions to prevent electric shock, fire, or injury.
- Kragtoevoer: Connect the unit only to a grounded mains socket with the correct voltage (110-120V or 220-240V AC, 50/60Hz) as indicated on the unit.
- Aarding: Ensure the power cord's grounding pin is always connected. Do not defeat the grounding purpose.
- Vog: Moenie die eenheid aan reën of vog blootstel nie. Moenie voorwerpe gevul met vloeistowwe, soos vase, op die eenheid plaas nie.
- Ventilasie: Verseker voldoende ventilasie. Moenie ventilasie-openinge blokkeer nie. Handhaaf 'n minimum afstand van 10 cm (4 duim) van mure of ander voorwerpe.
- Hitte: Moenie die eenheid naby hittebronne soos verkoelers, hitteregisters, stowe of ander apparaat (insluitend ampversterkers) wat hitte produseer.
- kabels: Beskerm kragkabels teen trap of knyp, veral by proppe, gerieflikheidsaansluitings en die punt waar hulle uit die apparaat kom.
- Diens: Verwys alle diens na gekwalifiseerde dienspersoneel. Versorging word vereis wanneer die apparaat op enige manier beskadig is, soos kragtoevoerkoord of prop beskadig is, vloeistof gemors is of voorwerpe in die apparaat geval het, die apparaat aan reën of vog blootgestel is, nie normaal werk nie. , of laat vaar is.
- Gewig: The unit is heavy (approximately 36.72 kg). Use proper lifting techniques or assistance when moving to prevent injury.
- Plasing: Place the subwoofer on a stable, level surface capable of supporting its weight.
3. Opstelling
3.1 Uitpak
Carefully remove the subwoofer from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
3.2 Fisiese Plasing
Position the subwoofer on a firm, level surface. For optimal bass response, consider placing the subwoofer in a corner or near a wall. Ensure there is sufficient space around the unit for proper ventilation, especially around the rear panel where the amplifier and cooling fan are located.

Figuur 3.2.1: Voor- en sykant view of the DAP Audio DRX-18BA Active Subwoofer, showing its robust enclosure and integrated handles.
3.3 Verbindings
Before making any connections, ensure the subwoofer's power switch is in the OFF position and the volume control is set to minimum.
- Oudio-invoer: Connect your audio source (e.g., mixer, audio interface) to the subwoofer's input connectors. The DRX-18BA features XLR Combo Female Left and XLR Female Right input connectors. Use balanced XLR cables for best performance.
- Oudio-uitvoer: Use the 2 XLR Male L/R output connectors to link the subwoofer to full-range loudspeakers or other audio equipment. These outputs typically pass through the input signal, often with a high-pass filter applied if the HPF bypass is not engaged.
- Kragverbinding: Once all audio connections are made, connect the supplied power cable to the AC IN socket on the rear panel and then to a suitable grounded mains outlet.

Figure 3.3.1: Rear panel of the DAP Audio DRX-18BA Active Subwoofer, showing the input/output connectors, controls, and cooling fan.
4. Bedryfsinstruksies
4.1 Kontroles en aanwysers
- Volume: Adjusts the overall output level of the subwoofer. Start with this control at minimum and gradually increase to the desired level.
- Krag skakelaar: Turns the subwoofer ON or OFF. Always turn on the subwoofer last in your audio chain and turn it off first.
- Grondhyser: Helps eliminate hum or buzz caused by ground loops. Engage this switch if you experience such noise.
- Fase: Reverses the phase of the subwoofer's output (0° or 180°). Adjust this to achieve optimal acoustic alignment with your full-range speakers, ensuring the bass frequencies are in phase.
- HPF Bypass: Engages or bypasses the internal High-Pass Filter (HPF). When engaged, the HPF typically filters out frequencies below 800 Hz from the output signal sent to linked full-range speakers.
- Kragaanwyser: Illuminates when the unit is powered ON.
- Knip aanwyser: Illuminates when the input signal is too high, causing distortion. If this light flashes frequently or stays lit, reduce the input volume from your source or the subwoofer's volume control.
4.2 Basiese werking
- Maak seker dat alle verbindings veilig en korrek is.
- Set the subwoofer's Volume control to its minimum position.
- Turn on your audio source and any connected full-range speakers.
- Flip the Power switch on the DRX-18BA to the ON position. The Power indicator should illuminate.
- Gradually increase the Volume control on the subwoofer until the desired bass level is achieved.
- Monitor the Clip indicator. If it flashes excessively, reduce the input signal level or the subwoofer's volume.
- Adjust the Phase switch to find the setting that provides the most coherent and impactful bass response in your listening environment.
- When finished, turn off the subwoofer first, then your full-range speakers and audio source.
5. Onderhoud
Proper maintenance ensures the longevity and reliable operation of your subwoofer.
- Skoonmaak: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or waxes.
- Ventilasie: Regularly check that the ventilation openings and the cooling fan on the rear panel are free from dust and debris. Use a soft brush or compressed air to clear any blockages.
- Berging: Indien die eenheid vir 'n lang tydperk gestoor word, plaas dit in sy oorspronklike verpakking in 'n droë, temperatuurbeheerde omgewing.
- Inspeksie: Periodically inspect the power cord and audio cables for any signs of damage. Replace damaged cables immediately.
6. Probleemoplossing
If you encounter issues with your DRX-18BA subwoofer, refer to the following common problems and solutions.
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Geen klankuitset nie |
|
|
| Distorted sound / Clip light on |
|
|
| Zoem of gons geluid |
|
|
If the problem persists after trying these solutions, contact qualified service personnel or your dealer for assistance.
7. Spesifikasies
| Stelsel tipe | Aktiewe subwoofer |
| Deurlopende krag | 700 W |
| Frekwensierespons (-6 dB) | 40 Hz - 20 000 Hz |
| SPL (1W/1M) | 98 dB / 126 dB (Max) |
| Woofer | 18" / 3" Voice Coil with Ventilation |
| Invoerverbindings | XLR Combo Female Left, XLR Female Right |
| Uitset Connectors | 2 x XLR Male L/R |
| Invoervlak | 0 DBU |
| Kontroles | Volume, Power, Ground Lift, Phase, HPF Bypass |
| Aanwysers | Krag, knip |
| Kragtoevoer | 110-120 V / 220-240 V, 50/60 Hz |
| Konstruksie | Plywood, Scratch-Resistant Black Finish |
| Paalberg | 2 x Standard 35 mm Metal |
| Afmetings (H x B x D) | 535 x 661 x 515 mm |
| Netto gewig | 36.72 kg |
8. Waarborg en Ondersteuning
For warranty information, please refer to the warranty card included with your product or contact your local DAP Audio dealer. For technical support or service inquiries, please contact the authorized DAP Audio service center in your region. Keep your proof of purchase for warranty claims.
You can find more information and contact details on the official DAP Audio webwebwerf: www.dap-audio.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.