1. Inleiding
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Figuur 1: Voorkant view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Belangrike veiligheidsinligting
Neem die volgende veiligheidsmaatreëls in ag om beserings of skade aan die produk te voorkom:
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Use only the specified battery type (4 AA batteries). Do not mix old and new batteries or different types of batteries.
- Keep all components, especially small parts, out of reach of children.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Protect the keypad from excessive moisture or direct water exposure.
3. Pakketinhoud
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- Buite-sleutelbordsamestelling
- Interior Assembly (Turn Knob)
- Doodbout-grendel
- Stakplaat
- Montageplaat
- Monteer skroewe
- Sleutels (2)
- SmartKey Learning Tool
- Installation Guide / Drilling Template
Figuur 2: Kant view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Installasie-instruksies
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Berei die deur voor: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Installeer die grendel: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Installeer eksterne sleutelbord: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Installeer Montageplaat: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Koppel kabels: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- Installeer binnesamestelling: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Installeer batterye: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Toetswerking: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Programmeringsinstruksies
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Setting the Master Code
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Enter a new 4-8 digit Master Code.
- Druk die "Sluit"-knoppie.
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Adding User Codes
You can store up to 6 unique user codes for access.
- Enter your Master Code.
- Press the "Program" button.
- Press "1" (for adding a user code).
- Enter a new 4-8 digit User Code.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Deleting User Codes
- Enter your Master Code.
- Press the "Program" button.
- Press "2" (for deleting a user code).
- Voer die gebruikerskode in wat u wil verwyder.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- In staat te stel: Enter Master Code, press "Program", press "3", press "Lock".
- Om te deaktiveer: Enter Master Code, press "Program", press "4", press "Lock".
6. Bedryfsinstruksies
6.1. Sluit die Deur
- Van Buitekant: Druk die "Sluit"-knoppie op die sleutelbord. Die grendel sal uitskuif.
- Van Binnekant: Rotate the turn knob to the locked position.
6.2. Ontsluit van die Deur
- Gebruik van 'n gebruikerskode: Voer 'n geldige 4-8-syfer gebruikerskode op die sleutelbord in. Die grendel sal terugtrek.
- Gebruik van 'n sleutel: Insert the key into the keyhole and turn to unlock.
- Van Binnekant: Rotate the turn knob to the unlocked position.
7. Onderhoud
7.1. Battery vervanging
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- Verwyder die batterydeksel op die binneste samestelling.
- Verwyder die ou batterye.
- Plaas 4 nuwe AA alkaliese batterye in en maak seker dat die polariteit (+/-) korrek is.
- Vervang die batterydeksel.
Let wel: Replacing batteries does not erase programmed codes.
7.2. Skoonmaak
Maak die slot skoon met 'n sagte, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish and electronic components.
7.3. SmartKey Rekeying
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Slot reageer nie op invoer op die sleutelbord nie. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| Die deadbolt strek nie heeltemal uit of in nie. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Auto-lock feature not working as expected. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| Kan nie nuwe kodes programmeer nie. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Produkspesifikasies
- Model: 9GED14600-101
- Handelsmerk: Weiser
- Slot tipe: Sleutelbord Elektroniese Deadbolt
- Materiaal: Geelkoper
- Kleur: Goud
- Afmetings (L x B x H): 6 x 11.13 x 4 duim
- Item gewig: 2.4 pond
- Kragbron: 4 AA-batterye (nie ingesluit nie)
- Spesiale kenmerk: Battery Indicator, SmartKey Rekeying
- Agtergrond: Verstelbaar 2-3/8" of 2-3/4"
- Bore Hole: 2-1/8"
- Gebruiker kodes: Tot 6
- ANSI/BHMI Rating: Graad 3
10. Waarborg en Kliëntediens
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser webwebwerf of binne die produkverpakking.
Weiser Official Webwebwerf: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.