Crosley C200 Direct-Drive Turntable Instruction Manual

Inleiding

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Belangrike veiligheidsinstruksies

• Lees alle instruksies voor gebruik.
• Bewaar hierdie handleiding vir toekomstige verwysing.
• Moenie hierdie toestel naby water gebruik nie.
• Maak slegs skoon met 'n droë lap.
• Moenie enige ventilasie-openinge blokkeer nie. Installeer volgens die vervaardiger se instruksies.
• Moenie naby enige hittebronne soos verkoelers, hitteregisters, stowe of ander toerusting (insluitend ampversterkers) wat hitte produseer.
• Beskerm die kragkoord teen geloop of vasgeknyp, veral by proppe, geriefshouers en die punt waar dit uit die apparaat kom.
• Gebruik slegs aanhegsels/bykomstighede gespesifiseer deur die vervaardiger.
• Ontkoppel hierdie apparaat tydens weerligstorms of wanneer dit vir lang tye ongebruik word.
• Verwys alle diens na gekwalifiseerde dienspersoneel. Versorging word vereis wanneer die apparaat op enige manier beskadig is, soos kragtoevoerkoord of prop beskadig is, vloeistof gemors is of voorwerpe in die apparaat geval het, die apparaat aan reën of vog blootgestel is, nie normaal werk nie. , of laat vaar is.

Pakketinhoud

Maak seker dat al die items wat hieronder gelys word, in jou pakket ingesluit is:

• Crosley C200 Direct Drive Turntable
• Gebruikershandleiding (hierdie dokument)
• Stofbedekking
• Skottel met dryfband
• Vilt glymat
• Teengewig
• Head Shell with Audio-Technica Magnetic Cartridge
• 45 RPM-adapter
• RCA Output Cables

Komponente oorview

Maak jouself vertroud met die hoofkomponente van jou draaitafel.

Opstelling

1. Platter en dryfband installasie

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Plaas die vilt-glymat bo-op die skottel.

2. Tone Arm Assembly and Balancing

1. Install Counterweight: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Verwyder die stylusbeskermer: Gently remove the clear plastic stylus protector from the cartridge.
4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Stel dopkrag in: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Stel Anti-Skate: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Verbinding met klankstelsel

1. Connect the RCA output cables from the turntable to your ampverligter of aangedrewe luidsprekers.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • FONO: Use if your amplifier has a dedicated phono input.
   • LYN: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Bedryfsinstruksies

1. Speel 'n plaat

1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
2. Kies die korrekte spoed (33 1/3 of 45 RPM) met behulp van die spoedkeuseskakelaar.
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Laat die stoothefboom liggies sak sodat die stylus op die plaat kan sak.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Maak seker dat die draaitafel aangeskakel is.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Soek vir "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/amplewendiger.

Let wel: The Bluetooth feature is for receiving audio aan the turntable, not for transmitting audio van the turntable to Bluetooth speakers.

Onderhoud

1. Skoonmaak van die stylus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Skoonmaak van die draaitafel

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Vermy die gebruik van harde chemikalieë of skuur skoonmakers.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Probleemoplossing

Spesifikasies

• Model: C200A-BK
• Handelsmerk: Crosley
• Ry tipe: Direkte ry
• Motor: Hoë wringkrag
• Snelhede: 33 1/3, 45 RPM
• Operasie: Volledig handmatig
• Tone Arm: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Patroon: Audio-Technica Magnetic Cartridge
• Voor-amplewendiger: Built-in switchable phono pre-amplewendiger
• Uitsette: Detachable RCA output cables
• Bord: Damped die-cast aluminum with felt slip mat
• Spesiale kenmerk: Ingeboude Bluetooth-ontvanger
• Materiaal: Aluminum (platter), Black finish
• Produk afmetings: 11.02 x 17.72 x 5.47 duim
• Item gewig: 11.02 pond
• Versoenbare toestelle: Spreker, Ampverligter, AV-ontvanger

Waarborg en Ondersteuning

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Vervaardiger: Crosley

Eerste datum beskikbaar: 22 Desember 2015

Amptelike Produkvideo's