Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Produk verbyview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Sleutel kenmerke:

• Energiedoeltreffendheid: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Lang lewensduur: Rated for 36,000 hours (based on 3 hours/day usage).
• Veelsydige montage: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Sagte wit lig: Provides a comfortable ambiance for general room lighting.
• Dimbaar: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Opstelling en installasie

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Installasie stappe:

1. Veiligheid eerste: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Berei montage-oppervlak voor: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Koppel bedrading: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Monteer bevestiging: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Herstel krag: Sodra die toebehore stewig gemonteer en bedraad is, herstel die krag by die stroombreker.
6. Toetsfunksionaliteit: Skakel die ligskakelaar aan om behoorlike werking te verifieer.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Bedryfsinstruksies

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Ligte kleurtemperatuur:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Dimbare funksionaliteit:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Onderhoud

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Skoonmaak:

• Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
• Vee die buitekant van die toestel af met 'n sagte, damp lap.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Maak seker dat die toestel heeltemal droog is voordat die kragtoevoer herstel word.

Probleemoplossing

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Lig skakel nie aan nie:
  • Kontroleer die stroombreker om te verseker dat krag na die toebehore voorsien word.
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Ligflikkerings:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Kyk vir los bedrading verbindings.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 Volt).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Spesifikasies

Waarborg inligting

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 jaar vir onderdele en arbeid vanaf die aankoopdatum. Bewaar asseblief u bewys van aankoop vir waarborgeise.

For warranty service or questions, please contact Philips customer support.

Kliënte ondersteuning

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webwebwerf vir kontakbesonderhede en ondersteuningsbronne.

Vervaardiger: Philips beligting

Handelsmerk: Philips