Inleiding
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
Sleutel kenmerke:
- Dual Alarm (Weekday/Daily alarm options)
- Binne temperatuur vertoon
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- Sluimer funksie
Pakketinhoud
Maak asseblief seker dat die volgende items in u pakket ingesluit is:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- Wisselstroomadapter
- AAA-batterye (2x)
- Instructiehandleiding (hierdie dokument)
Produk verbyview
Maak jouself vertroud met die hoofkomponente en kontroles van jou wekker.
Prent: Voorkant view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
Voorpaneel:
- LCD-skerm: Shows current time, indoor temperature, and alarm status.
- Projeksie lens: Projects time onto a surface.
- SNOOZE/LIGHT Button: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- MODUS-knoppie: Toggles display modes and enters setting menus.
- OP/AF-knoppies: Adjust values during settings, manually activate atomic time search.
- ALARM 1/2 Buttons: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- RESET-knoppie: Stel die eenheid terug na fabrieksverstellings.
- Battery kompartement: Holds backup batteries.
- DC IN Jack: Koppel aan die AC-kragadapter.
Opstelling
1. Battery Installasie
- Maak die batteryklep aan die agterkant van die eenheid oop.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages.
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atoomklok-sinchronisasie
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP knoppie vir 3 sekondes.
4. Tydsone instel
After successful atomic synchronization, you may need to set your local time zone.
- Druk en hou die MODUS knoppie vir 3 sekondes om tydinstellingsmodus te betree.
- Druk die MODUS button repeatedly until the Time Zone setting flashes.
- Gebruik die UP or AF buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- Druk MODUS to confirm and exit, or wait 30 seconds for automatic exit.
Bedryfsinstruksies
Manual Time and Date Setting (If Atomic Sync Fails)
- Druk en hou die MODUS button for 3 seconds. The hour digit will flash.
- Gebruik die UP or AF knoppies om die uur aan te pas.
- Druk MODUS to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- Druk MODUS to exit, or wait 30 seconds for automatic exit.
Alarms instel (Alarm 1 en Alarm 2)
Die horlosie beskik oor twee onafhanklike alarms (Alarm 1 en Alarm 2).
- Druk die ALARM 1 or ALARM 2 knoppie een keer om die huidige alarmtyd te vertoon.
- Press and hold the respective ALARM button for 3 seconds. The alarm hour will flash.
- Gebruik die UP or AF knoppies om die wekker uur aan te pas.
- Druk die ALARM button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or AF.
- Druk die ALARM button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or AF.
- Druk die ALARM button to confirm and exit, or wait 30 seconds for automatic exit.
Om 'n alarm te aktiveer of deaktiveer, druk die ALARM 1 or ALARM 2 button once. An alarm icon will appear on the LCD when active.
Sluimer funksie
Wanneer 'n alarm afgaan, druk die SNOOZE / LIG button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
Tydprojeksie
- Continuous Projection: Skuif die PROJEKSIE AAN/UIT skakel oor na ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the SNOOZE / LIG button to activate projection for approximately 15 seconds.
- Projection Orientation: Druk die PROJEKSIE ROTASIE button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- Aanpassing van projeksiehoek: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
LED backlight
Druk die SNOOZE / LIG button to illuminate the LCD display backlight for approximately 15 seconds.
Onderhoud
Maak die eenheid skoon
Vee die horlosie af met 'n sagte, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
Battery vervanging
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
Probleemoplossing
| Probleem | Oplossing |
|---|---|
| Die klokskerm is leeg of dof. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the PROJEKSIE AAN/UIT switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | Druk die PROJEKSIE ROTASIE button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| Die alarm lui nie. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Model | RM338PA |
| Afmetings (LxBxH) | 4.25" x 1.02" x 3.03" (10.8 cm x 2.6 cm x 7.7 cm) |
| Gewig | 0.24 pond (109 g) |
| Binnenshuise temperatuurreeks | -5°C tot 50°C (23°F tot 122°F) |
| Temperatuur Akkuraatheid | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| Temperatuurresolusie | 0.1°C (0.2°F) |
| Kragtoevoer | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| Tipe vertoon | Digital LCD with LED Backlight |
| Spesiale kenmerke | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
Waarborg inligting
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.
Kliënte ondersteuning
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's webwebwerf of in die produkverpakking.