Inleiding
This manual provides detailed instructions for the proper use and maintenance of your Fujitsu General Air Conditioner Remote Control, model AR-RCC2J. Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity.
Opstelling
Battery installasie
The remote control requires two AAA (UM-4) alkaline batteries. Ensure correct polarity when inserting the batteries.
- Slide the battery cover on the back of the remote control downwards to open.
- Insert two new AAA alkaline batteries, matching the (+) and (-) terminals as indicated inside the battery compartment.
- Maak die batteryklep toe deur dit terug te skuif totdat dit klik.
Belangrik: Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote control will not be used for an extended period to prevent leakage.
Figuur 1: Agterkant van die afstandbeheerder met batterykompartement.
Bedryfsinstruksies
Familiarize yourself with the buttons on your remote control. The following section describes the function of each button.
Figuur 2: Voorkant view van die afstandsbediening.
| Knoppie Naam | Funksie |
|---|---|
| 運転/停止 (Operation/Stop) | Skakel die lugversorger-eenheid AAN of AF. |
| 運転切換 (Operation Mode) | Cycles through operation modes: Auto, Cooling, Dehumidify, Fan, Heating. |
| 温度 (Temperature) ▲/▼ | Pas die verlangde temperatuurinstelling aan. |
| 風量切換 (Fan Speed) | Adjusts the fan speed: Auto, Strong, Weak, Gentle, Silent. |
| 風向 (Air Direction) | Pas die horisontale lugvloeirigting aan. |
| スイング (Swing) | Activates or deactivates the automatic vertical airflow swing. |
| ハイパワー (High Power) | Activates a powerful operation mode for rapid cooling or heating. |
| 電流カット (Current Cut) | Engages an energy-saving mode by limiting current consumption. |
| 信号切換 (Signal Switch) | Used for switching signals, potentially for controlling multiple units or specific functions. |
| プラズマイオン (Plasma Ion) | Activates the Plasma Ion function for air purification. |
| 内部クリーン (Internal Clean) | Initiates an internal cleaning cycle for the air conditioner unit. |
| タイマー (Timer) | Sets or cancels the ON/OFF timer. |
| 切換 (Switch) | Used for navigating or confirming timer settings. |
| 時間変更 (Time Change) | Pas die tyd vir timerinstellings aan. |
| リセット (Reset) | Resets the remote control settings. Typically a recessed button requiring a pointed object. |
Onderhoud
Maak die afstandbeheer skoon
Vee die afstandbeheerder af met 'n sagte, droë lap. Moenie vloeibare skoonmaakmiddels of skuurmiddels gebruik nie, aangesien dit die oppervlak of interne komponente kan beskadig.
Battery vervanging
Replace batteries when the display becomes dim or the remote control becomes unresponsive. Refer to the 'Battery Installation' section for detailed instructions.
Probleemoplossing
- Afstandbeheer reageer nie:
Check if the batteries are inserted correctly with the correct polarity. Replace with new batteries if they are old or depleted. Ensure there are no obstructions between the remote control and the air conditioner unit's receiver. - Skerm is dof of leeg:
This indicates low battery power. Replace both batteries with new AAA alkaline batteries. After replacing batteries, press the 'Reset' button (if available and accessible) to restore full functionality. - Air Conditioner Not Responding to Commands:
Ensure the remote control is pointed directly at the air conditioner unit. Verify that the air conditioner unit is powered on. If the issue persists, try resetting the remote control by removing and reinserting the batteries, then pressing the 'Reset' button.
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Modelnommer | AR-RCC2J |
| Kleur | Wit |
| Kragbron | 2 x AAA alkaliese batterye (nie ingesluit nie) |
| Afmetings (ongeveer) | 16.8 x 9 x 3.3 cm |
| Gewig (ongeveer) | 98 g |
| UPC | 601209819167 |
Waarborg en Ondersteuning
For warranty information or technical support, please refer to the documentation provided with your Fujitsu General air conditioner unit or contact Fujitsu General customer service directly. This remote control is designed as a genuine replacement part.