Clearaudio Concept MM Turntable User Manual

1. Inleiding

The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.

Sleutel kenmerke sluit in:

• Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
• Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
• Belt-drive motor for stable speed and reduced vibrations.
• Integrated tonearm (CF tonearm) designed for optimal tracking.

2. Wat is in die boks

Upon unpacking, please ensure all components are present and in good condition:

• Clearaudio Concept MM Turntable unit
• Pre-mounted Classic MM cartridge/stylus
• Stofbedekking
• Power supply unit (with cable)
• Dryfband
• Platter

Indien enige items ontbreek of beskadig is, kontak asseblief jou handelaar onmiddellik.

3. Opstelgids

Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.

3.1 Plasing

Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2 Uitpak en monteer

1. Gently remove the turntable from its packaging.
2. Place the main plinth on your chosen surface.
3. Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
4. Install the drive belt around the motor pulley and the inner rim of the platter.
5. Plaas die stofbedekking oor die draaitafel.

3.3 Tonearm and Cartridge Adjustment

Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.

• Opsporingskrag: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
• Anti-Skating: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
• VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.

Figuur 3.1: oorview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.

3.4 Konnektiwiteit

Connect the turntable to your audio system:

1. Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preamplewendiger.
2. Verbind die aarddraad van die draaitafel na die aardaansluiting op jou amplifier of phono preampverligter om hum te verminder.

3.5 Kragverbinding

Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.

4. Bedryfsinstruksies

4.1 Aan-/afskakel

Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.

4.2 Spoed Keuse

The Clearaudio Concept MM Turntable supports multiple playback speeds:

• 33 ⅕ RPM: Vir standaard LP's (Long Play-plate).
• 45 RPM: For singles and some audiophile pressings.
• 78 RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).

Select the appropriate speed using the control knob on the plinth.

4.3 Speel 'n plaat

1. Plaas 'n rekord op die bord.
2. Select the correct playback speed.
3. Lig die toonarm op met behulp van die stoothefboom.
4. Carefully position the tonearm over the desired starting groove of the record.
5. Laat die stoothefboom liggies sak sodat die stylus op die plaat kan sak.
6. Pas die volume op jou amplewendiger.

4.4 Stop van Terugspeel

1. Lig die toonarm op met behulp van die stoothefboom.
2. Plaas die toonarm terug in sy rusposisie.
3. Lower the cueing lever.
4. Turn the speed selection knob to the 'Off' position to power down the turntable.
5. Replace the dust cover to protect the turntable from dust.

5. Onderhoud

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• Stofbedekking: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
• Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• Skoonmaak van die stylus: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
• dryfband: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
• Patroon vervanging: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.

6. Probleemoplossing

Hier is 'n paar algemene probleme en hul potensiële oplossings:

If the problem persists, please contact your authorized Clearaudio dealer or support.

7. Spesifikasies

8. Waarborg en Ondersteuning

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.

For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio webwebwerf vir kontakbesonderhede.