True TRUE988284

True 988284 Temperature Control Kit 077B6856 Instruction Manual

Model: TRUE988284

1. Produk verbyview

The True 988284 Temperature Control Kit 077B6856 is a genuine Original Equipment Manufacturer (OEM) replacement part designed for True Refrigeration units. This kit ensures the proper regulation of temperature within your commercial refrigeration equipment, maintaining optimal operating conditions for safety, reliability, and performance.

True 988284 Temperature Control Kit with dial and capillary tube

Beeld 1.1: verbyview of the True 988284 Temperature Control Kit, showing the control unit, dial, and capillary tube.

Sleutel kenmerke:

  • Genuine OEM replacement part for True Refrigeration.
  • Designed for safety, reliability, and performance.
  • Ensures accurate temperature regulation.
  • Approved by the original equipment manufacturer.

2. Veiligheidsinligting

Belangrik: Read all instructions carefully before installation or operation. Failure to follow these instructions may result in property damage, personal injury, or death.

  • Elektriese gevaar: Always disconnect power to the refrigeration unit before attempting any installation, maintenance, or repair.
  • Gekwalifiseerde personeel: Installation and servicing should only be performed by qualified and authorized service personnel.
  • Oorspronklike Onderdele: Use only genuine OEM parts for replacements to ensure compatibility, safety, and optimal performance.
  • Beoogde gebruik: This temperature control kit is intended solely for its specified designed usage within True Refrigeration equipment. Do not use for any other purpose.
  • Kapillêre buis: Handle the capillary tube with care. Do not bend sharply or kink, as this can damage the sensor and affect performance.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig en onbeskadig is wanneer die verpakking oopgemaak word.

Components of the True 988284 Temperature Control Kit including control unit, dial, screws, and connectors

Image 3.1: Contents of the True 988284 Temperature Control Kit, typically including the control module, temperature dial, mounting screws, and electrical connectors.

  • Temperature Control Module with Capillary Tube
  • Temperature Adjustment Dial
  • Mounting Screws (typically 2)
  • Electrical Connectors (typically 2)
  • Instruction Sheet (if included by manufacturer)

4. Installasie-instruksies

This section provides general guidance for replacing a temperature control kit. Specific installation steps may vary depending on your True Refrigeration model. Refer to your unit's service manual for detailed, model-specific instructions.

  1. Ontkoppel krag: Locate the main power supply to the refrigeration unit and disconnect it. Verify that power is off using a voltage toetser.
  2. Access Control Area: Depending on your unit, you may need to remove access panels or grilles to reach the existing temperature control.
  3. Dokumentbedrading: Before disconnecting any wires, take clear photos or make a diagram of the existing wiring connections to the old temperature control. Note the position of the capillary tube sensor.
  4. Verwyder ou beheer:
    • Carefully disconnect the electrical wires from the old control.
    • Unmount the old control from its housing.
    • Gently remove the capillary tube sensor from its sensing location (e.g., evaporator coil, air return).
  5. Install New Control:
    • Insert the new capillary tube sensor into the exact same sensing location as the old one. Ensure it is securely positioned for accurate temperature readings. Avoid kinking or damaging the tube.
    • Mount the new temperature control module in the same position as the old one using the provided screws.
    • Connect the electrical wires to the new control according to your documented wiring diagram. Ensure connections are secure.
  6. Hermonteer: Replace any access panels or grilles that were removed.
  7. Herstel krag: Reconnect the main power supply to the refrigeration unit.
  8. Toetswerking: Allow the unit to run for a period and monitor the temperature to ensure proper operation and temperature regulation. Adjust the dial as needed.

Let wel: If you are unsure about any step, consult a qualified refrigeration technician.

5. Bedryfsinstruksies

The temperature control kit features a rotary dial for adjusting the desired temperature within your True Refrigeration unit.

  • Temperatuuraanpassing: Rotate the dial to select the desired temperature setting. Typically, rotating towards "Colder" or higher numbers (e.g., 6, 7, 8) will decrease the temperature, while rotating towards "Warmer" or lower numbers (e.g., 1, 2, 3) will increase it.
  • Monitering: After adjusting the setting, allow several hours for the refrigeration unit to stabilize at the new temperature. Use an independent thermometer to verify the internal temperature.
  • Optimal Setting: The optimal setting will depend on the specific refrigeration unit and the products being stored. Adjust incrementally until the desired temperature range is consistently maintained.

6. Onderhoud

The True 988284 Temperature Control Kit is designed for durability and reliability. Regular maintenance of the overall refrigeration unit is crucial for its longevity and efficient operation.

  • Periodieke inspeksie: Periodically inspect the control module and its wiring for any signs of wear, corrosion, or loose connections.
  • Kapillêre buis: Ensure the capillary tube remains securely in its sensing location and is not damaged or kinked.
  • Skoonmaak: Keep the area around the temperature control free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
  • Professionele tjek: Consider annual professional maintenance checks for your refrigeration unit, which should include inspection of the temperature control system.

7. Probleemoplossing

If your refrigeration unit is experiencing temperature issues after installing this kit, consider the following common troubleshooting steps:

ProbleemMoontlike oorsaakOplossing
Unit not cooling or too warm
  • Temperature dial set too high (warmer)
  • Capillary tube not properly seated or damaged
  • Los elektriese verbinding
  • Other refrigeration system issues (e.g., low refrigerant, dirty condenser)
  • Adjust dial to a colder setting.
  • Verify capillary tube placement and condition.
  • Check and secure all wiring connections (with power disconnected).
  • Consult a qualified technician for system diagnosis.
Unit freezing contents or too cold
  • Temperature dial set too low (colder)
  • Capillary tube sensing incorrect temperature (e.g., too close to evaporator)
  • Beheereenheid wanfunksie
  • Adjust dial to a warmer setting.
  • Ensure capillary tube is correctly positioned away from direct evaporator contact if applicable.
  • If issues persist, the control unit may require replacement or further diagnosis by a technician.
Temperature fluctuates widely
  • Improper capillary tube placement
  • Beheereenheid wanfunksie
  • Refrigeration system issues
  • Verify capillary tube placement.
  • Consult a qualified technician for diagnosis.

Waarskuwing: Do not attempt repairs beyond your technical capabilities. Always prioritize safety and consult a professional for complex issues.

8. Spesifikasies

KenmerkDetail
HandelsmerkWaar
ModelnommerWAAR988284
Produk afmetings6 x 6 x 4 duim
Item gewig4.8 onse
BedryfsmodusOutomatiese
Kontak TipeNormaalweg oop
Connector TipeSkroef terminale
TerminaleSkroef
Stroombaan1-rigting
Montage tipeOppervlakmontering
Aktuator tipeDrukknop
Kontak MateriaalKoper, Messing
Datum Eerste Beskikbaar15 Junie 2011

9. Waarborg en Ondersteuning

As a genuine OEM part, this True 988284 Temperature Control Kit is manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original True Refrigeration unit or contact True Refrigeration directly.

Kliëntediens:

For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact True Refrigeration customer support or an authorized service provider.

  • Vervaardiger: Waar
  • Webwebwerf: www.truemfg.com
  • Modelnommer: WAAR988284
  • Onderdeelnommer: 988284, 077B6856

© 2025 True Refrigeration. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.