Icron Ranger 2304 4-Port USB 2.0 100 Meter Cat 5e Extender System Instruction Manual

Produk verbyview

The Icron Ranger 2304 is a four-port USB 2.0 extender system designed to provide true USB 2.0 extension at speeds up to 480Mbps over Cat 5e cabling. This system operates without the need for supplementary software drivers, offering a true plug-and-play solution. It is compatible with all leading operating systems, including Windows, macOS, and Linux, and supports a wide range of USB 3.0 (at USB 2.0 speeds), 2.0, and 1.1 peripherals such as keyboards, webcams, mice, flash drives, and interactive whiteboards. The integrated four-port hub allows for the extension of up to four USB devices simultaneously. The Ranger 2304 features an ASIC-based design, an updated Cypress USB hub, and Realtek internal Ethernet PHY for reliable performance.

Pakketinhoud

• 1 x Icron Ranger 2304 Local Extender (LEX) Unit
• 1 x Icron Ranger 2304 Remote Extender (REX) Unit with 4-port USB hub
• 1 x USB 2.0 Cable (Type A to Type B)
• 1 x 24V 1A DC Power Adapter
• Montagehakies en skroewe
• Gebruikershandleiding

Prent: The Icron Ranger 2304 extender system components neatly packaged in its box, including the LEX and REX units, power adapter, and cables.

Opstel instruksies

1. Connect the Local Extender (LEX) to your Computer: Use the provided USB 2.0 Type A to Type B cable. Plug the Type B end into the "USB Host" port on the LEX unit and the Type A end into an available USB port on your computer.
2. Connect the Remote Extender (REX) to Peripherals: Plug your USB 2.0 (or USB 3.0/1.1 peripherals operating at USB 2.0 speeds) devices (e.g., keyboard, mouse, webcam, flash drive) into the four USB 2.0 ports on the REX unit.
3. Connect the Power Adapter to the REX Unit: Plug the 24V 1A DC power adapter into the power input port on the REX unit.
4. Connect LEX and REX Units via Cat 5e Cable: Use a standard Cat 5e (or better) Ethernet cable (up to 100 meters / 330 feet, not included) to connect the "UTP Out" port on the LEX unit to the "UTP In" port on the REX unit.
5. Verifieer verbinding: Once all connections are made, check the status indicator lights on both the LEX and REX units. A solid green light typically indicates a successful connection and normal operation.

Prent: A diagram illustrating the connection of the Icron Ranger 2304 system. The Local Extender (LEX) connects to the computer via USB, and the Remote Extender (REX) connects to USB devices. Both LEX and REX units are linked by a Cat 5e cable, with the REX unit receiving power.

Bedryfsinstruksies

The Icron Ranger 2304 is designed for plug-and-play operation. Once properly connected and powered, your computer should automatically detect the extended USB devices without requiring any additional driver installation. The system transparently extends the USB 2.0 signal, allowing you to use your peripherals as if they were directly connected to your computer.

• Prop en speel: No software drivers are required for basic operation.
• Toestelversoenbaarheid: Supports all USB 3.0 (at USB 2.0 speeds), 2.0, and 1.1 devices.
• Multi-toestel ondersteuning: The REX unit features an integrated four-port hub, allowing simultaneous connection of up to four USB devices.
• Bedryfstelsels: Versoenbaar met Windows-, macOS- en Linux-bedryfstelsels.

Spesifikasies

Waarborg en Ondersteuning

The Icron Ranger 2304 4-Port USB 2.0 100 Meter Cat 5e Extender System comes with a 3-jaar vervaardiger se waarborg. For technical support or warranty claims, please refer to the contact information provided in your product packaging or visit the official Icron webwebwerf.