Inleiding
The Onkyo A-9010 is an integrated stereo amplifier designed to deliver high-quality audio performance for various sources, including vinyl records, digital audio, and compact discs. This amplifier incorporates Onkyo's high-current WRAT (Wide Range Amp Technology), features a range of digital and analog audio inputs, a built-in phono equalizer, and a high-quality Wolfson DAC. This manual provides essential information for setting up, operating, and maintaining your A-9010 amplewendiger.
Veiligheidsinligting
WAARSKUWING: RISIKO VAN ELEKTRIESE SKOK. MOET NIE OOPMAAK NIE. To reduce the risk of electric shock, do not remove the cover (or back panel). There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
Hierdie toestel voldoen aan Deel 15 van die FCC-reëls. Bediening is onderhewig aan die volgende twee voorwaardes: (1) Hierdie toestel mag nie skadelike steuring veroorsaak nie, en (2) hierdie toestel moet enige steuring wat ontvang word aanvaar, insluitend steuring wat ongewenste werking kan veroorsaak.
CAUTION: SPEAKER IMPEDANCE 4~16Ω/SPEAKER. Ensure your speakers have an impedance rating between 4 and 16 ohms for proper and safe operation. Refer to this instruction manual for correct settings and wiring.
Sleutel kenmerke
- High-quality Wolfson WM8718 DAC unit for decoding PCM signals up to 192 kHz and 24-bit resolution, providing clear analog sound from digital sources.
- Digital audio inputs include a 192 kHz/24-bit-capable coaxial input (D1) and a 96 kHz/24-bit optical input (D2) for connecting various source devices like PCs and media streamers.
- Powerful independent headphone amplifier designed for clear and detailed sound reproduction.
- Built-in MM (Moving Magnet) phono equalizer with a phono overload of 94 mV (MM, 1 kHz, 0.5%).
- Output power of 44 W/Ch (8 Ohms, 1 kHz, 0.08% THD, 2 Channels Driven, FTC).
- Features WRAT (Wide Range Amp Technology) for high-current delivery and low distortion.
- Equipped with discrete low-impedance amplifiers, an extruded aluminum heat sink, and capacitors optimized for high current.
- Gold-plated transparent speaker posts for reliable connections.
Opstel en verbindings
Voordat u enige komponente koppel, maak seker dat die amplifier is powered off and unplugged from the wall outlet. Refer to the diagram below for a visual guide to the rear panel connections.
This image displays the rear panel of the Onkyo A-9010 amplifier. From left to right, it features the PHONO (MM) input with a ground terminal, four LINE IN RCA inputs (labeled 1-4), one LINE OUT RCA output, digital inputs (Coaxial D1 and Optical D2), speaker terminals for left and right channels, and an RI remote control jack. The power cord is also visible on the right side.
Koppel oudiobronne
- PHONO (MM) Input: Connect your turntable to the PHONO (MM) input jacks. Ensure to connect the turntable's ground wire to the GND terminal on the ampverligter om hum te verminder.
- LINE IN Inputs (1-4): Use these RCA stereo inputs to connect analog audio sources such as CD players, tuners, or tape decks.
- DIGITAL IN (D1 Coaxial, D2 Optical): Connect digital audio sources like a digital media player, TV, or game console using either a coaxial digital cable to D1 or an optical digital cable to D2.
- LYNSTAAN: This RCA stereo output can be used to connect to a recording device or another amplewendiger.
Koppel luidsprekers
- Ensure your speakers have an impedance rating between 4 and 16 ohms.
- Connect the right speaker to the 'R' terminals and the left speaker to the 'L' terminals.
- Match the polarity: connect the positive (+) terminal of the amplifier to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier to the negative (-) terminal of the speaker.
- Use high-quality speaker wire for optimal sound performance.
RI Remote Control
The RI (Remote Interactive) jack allows for integrated control with other compatible Onkyo components using a single remote control. Connect an RI cable from the amplifier to the RI jack on your other Onkyo device.
Bedryfsinstruksies
Krag aan/af
Press the power button on the front panel to turn the ampdie kragaanwyser sal brand wanneer die eenheid aan is.
Invoerkeuse
Use the input selector knob or buttons on the front panel, or the remote control, to choose the desired audio source (e.g., PHONO, CD, LINE 1-4, D1 COAXIAL, D2 OPTICAL). The selected input will be indicated on the display.
Volumebeheer
Adjust the master volume knob on the front panel or use the volume buttons on the remote control to set the listening level. Start with a low volume and gradually increase it to a comfortable level.
Toonkontroles
Die amplifier features Bass, Treble, and Balance controls. Adjust these to fine-tune the sound to your preference and listening environment. The 'Direct' mode bypasses these tone controls for the purest audio signal.
Koptelefoongebruik
Connect headphones to the headphone jack on the front panel. When headphones are connected, sound output to the speakers will typically be muted.
Onderhoud
- Skoonmaak: Vee die ampVee die buitekant van die verligter af met 'n sagte, droë lap. Moenie skuurmiddels, wasse of oplosmiddels gebruik nie.
- Ventilasie: Verseker voldoende ventilasie rondom die amplifier. Do not block ventilation openings or place the unit in an enclosed space without proper airflow. Overheating can damage the unit.
- Kragkabel: Regularly check the power cord for any damage. If damaged, discontinue use and contact qualified service personnel for replacement.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Geen krag nie | Power cord disconnected; Power outlet not active | Maak seker dat die kragkabel stewig ingeprop is; Gaan die kragaansluiting na met 'n ander toestel |
| Geen klank nie | Incorrect input selected; Speaker wires disconnected; Volume too low; Mute activated | Select correct input source; Check speaker connections; Increase volume; Deactivate mute function |
| Verwronge klank | Input level too high; Speaker impedance mismatch; Damaged cables | Reduce source device volume; Verify speaker impedance (4-16 ohms); Check and replace damaged cables |
| Afstandbeheer werk nie | Batteries depleted; Obstruction between remote and unit; Incorrect remote mode | Replace batteries; Remove obstructions; Ensure remote is in the correct operating mode for the amplewendiger |
Spesifikasies
- Model: A-9010
- Uitset krag: 44 W/Ch (8 Ohms, 1 kHz, 0.08% THD, 2 Channels Driven, FTC)
- Aantal kanale: 2
- Luidspreker impedansie: 4–16 Ohms
- Digitale klankinvoere: 1 x Coaxial (192 kHz/24-bit), 1 x Optical (96 kHz/24-bit)
- DAC: Wolfson WM8718
- Phono Equalizer: MM type, Phono Overload 94 mV (MM, 1 kHz, 0.5%)
- Afmetings (L x B x H): Ongeveer 13 x 17 x 5 duim (330 x 432 x 127 mm)
- Gewig: Ongeveer 14.3 pond (6.5 kg)
- Kraggradering: AC 120V~ 60Hz 140W
- Vervaardiger: Onkyo Corporation
- Gemaak in: Viëtnam
Waarborg en Ondersteuning
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Onkyo website. Do not attempt to service the unit yourself, as this may void your warranty and pose a risk of electric shock.