Holzmann TBS 650PRO Manual Sheet Metal Guillotine Shear

1. Veiligheidsinstruksies

Read and understand all safety instructions before operating the Holzmann TBS 650PRO manual sheet metal guillotine shear. Failure to follow these instructions may result in serious injury or damage to the equipment.

• Dra altyd gepaste persoonlike beskermende toerusting (PPE), insluitend veiligheidsbril, handskoene en stewige skoene.
• Ensure the machine is securely mounted on a stable and level workbench before use.
• Keep hands and fingers clear of the cutting blade and hold-down device during operation.
• Do not exceed the maximum cutting capacity of 650 mm width and 1.5 mm thickness.
• Keep the work area clean and well-lit. Remove all tools and debris from the machine before operation.
• Only authorized and trained personnel should operate this equipment.
• Inspect the blade and all moving parts for damage or wear before each use. Do not operate if damaged.

2. Produk verbyview

The Holzmann TBS 650PRO is a manual sheet metal guillotine shear designed for precise cutting of sheet materials up to 650 mm wide and 1.5 mm thick. It features robust construction and user-friendly adjustments for efficient operation.

Sleutel kenmerke:

• Manual Back Gauge: Equipped with a measuring scale for accurate material positioning from 0 to 500 mm.
• Cutting Area Illumination: Provides clear visibility of the cutting line for enhanced precision.
• Hoë-gehalte lem: Features a cutting blade made from carbon and chrome content steel for durability and clean cuts.
• Fixed Angular Stop: Located on the front for consistent angled cuts.
• Automatic Sheet Hold-Down Device: Secures the sheet metal firmly in place just before the cut, preventing movement and ensuring accuracy.

Figure 1: Holzmann TBS 650PRO Manual Sheet Metal Guillotine Shear. This image shows the complete shear with its red frame, grey blade guard, and long operating handle.

3. Opstelling

3.1 Uitpak

• Carefully remove the shear from its packaging.
• Inspect the machine for any signs of shipping damage. Report any damage to your supplier immediately.
• Verifieer dat al die komponente wat in die paklys gelys word, teenwoordig is.

3.2 Assembly and Placement

• Position the shear on a sturdy, level workbench or stand capable of supporting its weight (Net Weight: 105 Kg).
• Securely fasten the shear to the workbench using appropriate bolts and nuts to prevent movement during operation.
• Attach the operating handle to its designated pivot point, ensuring it is firmly secured.
• Ensure there is adequate clear space around the machine for safe operation and material handling.

4. Bedryfsinstruksies

4.1 Preparing the Material

• Ensure the sheet metal to be cut is clean and free of burrs or obstructions.
• Verify that the material thickness does not exceed 1.5 mm and the width does not exceed 650 mm.

4.2 Adjusting the Back Gauge

The manual back gauge allows for precise control over the cutting length. To adjust:

1. Loosen the locking mechanism for the back gauge.
2. Slide the back gauge to the desired measurement using the integrated scale (range 0 to 500 mm).
3. Tighten the locking mechanism to secure the back gauge in position.

4.3 Snyprosedure

1. Position the sheet metal against the back gauge and the fixed angular stop (if required) on the front.
2. Ensure the material is flat and fully supported on the cutting bed.
3. Lower the operating handle slowly. The automatic sheet hold-down device will engage, securing the material.
4. Continue to lower the handle with steady pressure to execute the cut.
5. Once the cut is complete, raise the operating handle to its original position. The hold-down device will release.
6. Carefully remove the cut material and any off-cuts.

5. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your Holzmann TBS 650PRO shear.

5.1 Skoonmaak

• After each use, clean the cutting bed and blade area to remove metal shavings and dust.
• Use a brush or compressed air for cleaning. Avoid using harsh chemicals that may damage painted surfaces.

5.2 Lemversorging

• Regularly inspect the carbon-chrome steel cutting blade for sharpness and any signs of damage (nicks, dullness).
• A dull blade can lead to poor cut quality and increased effort. If the blade is dull, it should be professionally sharpened or replaced.
• When replacing the blade, ensure it is a genuine Holzmann replacement part for optimal performance and safety.

5.3 Smering

• Apply a light machine oil to all pivot points and sliding surfaces periodically to ensure smooth operation.
• Vee enige oortollige olie af om stofophoping te voorkom.

5.4 Berging

• Store the shear in a dry, clean environment to prevent rust and corrosion.
• If storing for an extended period, apply a thin layer of protective oil to exposed metal surfaces, especially the blade.

6. Probleemoplossing

Hierdie afdeling bespreek algemene probleme wat u tydens die operasie kan teëkom.

7. Spesifikasies

Technical specifications for the Holzmann TBS 650PRO Manual Sheet Metal Guillotine Shear.

8. Waarborg en Ondersteuning

8.1 Waarborginligting

The Holzmann TBS 650PRO comes with a 2 jaar waarborg. This warranty covers manufacturing defects but excludes wear parts. Please retain your proof of purchase for warranty claims.

8.2 Kliëntediens

For technical assistance, spare parts, or warranty inquiries, please contact your authorized Holzmann dealer or the retailer from whom you purchased the product. Provide your model number (TBS650PRO) and purchase date when contacting support.