Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module Instruction Manual

Inleiding

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.

Veiligheidsinligting

WAARSKUWING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• Lees alle instruksies noukeurig voor installasie.
• Ensure the electrical supply is disconnected before handling the fixture.
• Alle bedradingverbindings moet in ooreenstemming wees met plaaslike en nasionale elektriese kodes.
• Moenie die gespesifiseerde voltage (120 Volt).
• Hierdie toebehore is slegs ontwerp vir binnenshuise gebruik.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• LED Flush Mount Fixture (with integrated AC Module)
• Glasskerm
• Mounting Hardware Kit (screws, wire nuts, mounting strap)
• Instruksie Handleiding

Gereedskap benodig (nie ingesluit nie)

• Phillips-kopskroewedraaier
• Flathead-skroewedraaier
• Draadstroppers
• Tang
• Elektriese band
• Veiligheidsbril

Opstelling en installasie

Follow these steps to properly install your LED flush mount fixture:

1. Skakel krag af: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltage toetser.
2. Berei montering voor: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
3. Bedrading verbindings:
   • Koppel die swart draad van die toebehore na die swart (warm) draad vanaf die aansluitboks met behulp van 'n draadmoer.
   • Koppel die wit draad van die toebehore na die wit (neutrale) draad vanaf die aansluitkas met behulp van 'n draadmoer.
   • Koppel die grond draad van die toebehore na die grond wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
   • Steek alle drade versigtig in die aansluitkas.
4. Heg toebehore aan: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
5. Installeer glasskerm: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
6. Herstel krag: Skakel die krag weer aan by die stroombreker of sekeringboks.

Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.

Beeld: Bvamples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.

Bedryfsinstruksies

Once installed, operate your LED flush mount fixture as follows:

• Krag aan/af: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
• verduistering: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.

Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.

Onderhoud

The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:

• Skoonmaak: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
• Inspeksie: Inspekteer die toebehore gereeld vir enige tekens van skade of los verbindings. Indien enige probleme gevind word, ontkoppel die krag en raadpleeg 'n gekwalifiseerde elektrisiën.

Probleemoplossing

If you encounter issues with your fixture, refer to the following common problems and solutions:

Spesifikasies

Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:

• Modelnommer: P3408-0930K9
• Handelsmerk: Progress Lighting
• Kleur: Geborselde nikkel
• Materiaal: Legeringstaal, Glas
• Styl: Kontemporêr
• Liggaamvorm: Naby plafon
• Produk afmetings: 9.25 cm L x 9.25 cm B x 4.63 cm H
• Binne/buiteluggebruik: Binneshuise
• Kragbron: Elektries met koord
• Installasie tipe: Spoelberg
• Ligbrontipe: Integrated LED (AC Module)
• Aantal ligbronne: 1
• Voltage: 120 Volt
• Ligte kleur: Warm Wit (3000K)
• Helderheid: 1211 Lumen
• Wattage: 17 Watt
• Kleurweergawe-indeks (CRI): 90
• Dimbaar: Yes, with compatible wall dimmer
• Vergadering benodig: Ja
• Land van oorsprong: China
• UPC: 785247189168

Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.

Waarborg inligting

This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5 jaar waarborg from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.

Kliënte ondersteuning

If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting webwebwerf of deur jou kleinhandelaar.

Aanlyn hulpbronne: Vir bykomende inligting en ondersteuning, besoek die Progress Lighting Store on Amazon.