AMOCAM V70C-520-3

AMOCAM V70C-520-3 3-Unit Apartment Video Intercom System User Manual

Model: V70C-520-3 | Brand: AMOCAM

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your AMOCAM V70C-520-3 3-Unit Apartment Video Intercom System. This system is designed to enhance security and communication for multi-household buildings, featuring a 7-inch indoor monitor, an outdoor IR camera, and two-way intercom functionality. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Pakketinhoud

Verifieer dat al die items wat hieronder gelys word in u pakket ingesluit is. Indien enige items ontbreek of beskadig is, kontak asseblief kliëntediens.

  • 1 x Buitedeurklokkie-eenheid
  • 3 x Binnenshuise Monitore (7-duim)
  • 1 x Kragtoevoer
  • Aansluitkabels
  • Mounting Accessories (screws, wall brackets)

3. Veiligheidsinligting

Neem die volgende veiligheidsmaatreëls in ag om skade aan die produk te voorkom en gebruikersveiligheid te verseker:

  • Elektriese veiligheid: Maak seker dat die krag afgeskakel is voordat enige bedrading of installasie uitgevoer word. Alle elektriese werk moet deur 'n gekwalifiseerde elektrisiën uitgevoer word as u onseker is.
  • Omgewingstoestande: Do not expose the outdoor unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. The indoor monitors are for indoor use only.
  • Hantering: Handle components with care to avoid physical damage. Do not attempt to disassemble or repair the units yourself.
  • kabels: Use only the provided or recommended cables. Ensure cables are properly secured and not exposed to damage.

4. Opstelling en installering

This section outlines the steps for installing your video intercom system. The system uses a wired connection for stable performance.

4.1 Installasie van buite-eenheid

  1. Monteerplek: Choose a location near your entrance, typically beside the door, where the camera can capture a clear view of visitors. The recommended height for the camera lens is between 145-160 cm (approximately 57-63 inches) from the ground, with the call button around 126 cm (approximately 50 inches).
  2. Bevestig die hakie: Pass the set iron through the holes on both sides of the outdoor station. Fix the bottom cover to the wall using the provided screws.
  3. Bedrading: Connect the necessary wires (video, audio, power) from the outdoor unit to the main distribution point according to the wiring diagram.
Installation diagram for the AMOCAM video intercom system, showing standard height for outdoor station installation (145-160cm camera lens height, 126cm call button height), and a detailed wiring schematic connecting the outdoor unit to multiple indoor monitors and an electric lock.

Figure 4.1: Outdoor Unit Installation Diagram and Wiring Schematic

4.2 Installasie van binnenshuise monitor

  1. Monteerplek: Select a convenient indoor location for each monitor, such as a living room or hallway.
  2. Bevestig die hakie: Install the wall bracket for each indoor monitor using screws.
  3. Bedrading: Connect the indoor monitor to the main distribution point using the provided connection cables. Ensure all connections are secure. Refer to the wiring diagram for correct terminal connections.
  4. Kragverbinding: Plug in the power supply for each indoor monitor.
  5. Hang the Monitor: Once wiring is complete, hang the indoor monitor onto its bracket.
Agter view of the AMOCAM indoor monitor, showing wiring terminals for GND, DC15V, Video, Audio, and Power connections.

Figure 4.2: Indoor Monitor Wiring Terminals

4.3 System Wiring Overview

The system utilizes a wired connection for reliable communication. The outdoor unit connects to a central point, which then distributes signals to each indoor monitor. An electric lock can also be integrated into the system for remote door unlocking.

Wiring Diagram Explanation:

  • GND: Grondverbinding.
  • DC15V: Power input for the monitor.
  • Video: Video sein oordrag.
  • Oudio: Audio signal transmission.
  • Krag: Additional power connection for specific functions or accessories.

Ensure all wires are connected to their corresponding terminals on both the outdoor unit and indoor monitors. Incorrect wiring can lead to system malfunction or damage.

This video demonstrates the AMOCAM V70C-520-3 3-Unit Apartment Video Intercom System, showcasing its components, wiring connections, and operational features such as calling, monitoring, and two-way communication between the outdoor unit and indoor monitors.

5. Bedryfsinstruksies

This section details how to use the various functions of your AMOCAM video intercom system.

5.1 Binnenshuise Monitor Funksies

Kant view of the AMOCAM indoor monitor showing control knobs for intercom volume, music & ring volume, monitor, unlock, brightness, and screen color.

Figure 5.1: Indoor Monitor Controls

  • Door Answering: When a visitor presses the call button on the outdoor unit, the indoor monitor will ring and display the visitor's image. Press the 'Answer' button on the monitor to establish two-way communication.
  • Monitering: Press the 'Monitor' button on the indoor unit to view the outdoor camera feed at any time, even without a visitor pressing the doorbell. This allows you to see outside your door.
  • Ontsluit: If an electric lock is connected to the system, press the 'Unlock' button on the indoor monitor to remotely open the door for your visitor.
  • Tweerigting-interkom: Engage in real-time audio communication with visitors at the outdoor unit.
  • Inter-Monitor Communication: The system supports communication between indoor monitors within the same household or between different households if configured.
  • Volume aanpassing: Use the 'Music & Ring volume' knob to adjust the doorbell chime volume and the 'Intercom volume knob' for call volume.
  • Vertoonaanpassings: Use the 'Brightness knob' and 'Screen color knob' to customize the display settings of your 7-inch LCD screen.
  • Doorbell Chimes: Choose from 16 different kinds of doorbell chimes.

5.2 Outdoor Unit Functions

AMOCAM outdoor camera unit, front view, featuring call buttons and camera lens.

Figure 5.2: Outdoor Unit Front View

  • Oproepknoppies: Each household has a dedicated call button. Pressing a button will alert the corresponding indoor monitor.
  • IR Night Vision Camera: The 700TVL CMOS camera provides clear video, even in low-light conditions, thanks to its infrared night vision capabilities.
  • Mikrofoon en luidspreker: Integrated microphone and speaker enable two-way audio communication with indoor monitors.

6. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your AMOCAM video intercom system.

  • Skoonmaak: Use a soft, dry cloth to clean the indoor monitors and outdoor unit. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surfaces.
  • Buite-eenheid: Periodically check the outdoor unit for any obstructions to the camera lens or microphone/speaker. Ensure it is free from dirt, dust, and spiderwebs.
  • kabels: Inspect all visible cables for signs of wear or damage. Ensure connections remain secure.
  • Sagteware-opdaterings: Gaan die vervaardiger na website periodically for any available firmware updates for your system.

7. Probleemoplossing

Indien u probleme met u stelsel ondervind, raadpleeg die volgende algemene probleme en oplossings:

ProbleemMoontlike oorsaakOplossing
No video on indoor monitorLoose video cable connection; power issue; camera malfunction.Check all video cable connections. Ensure the outdoor unit and indoor monitor are powered. If the issue persists, contact support.
Geen klank tydens interkom nieLoose audio cable connection; volume too low; microphone/speaker malfunction.Verify audio cable connections. Adjust intercom volume on the indoor monitor. Check for obstructions on the microphone/speaker.
Deurklokkie lui nieLoose call button wiring; chime volume too low; monitor not powered.Check call button wiring. Increase the 'Music & Ring volume' on the indoor monitor. Ensure the monitor has power.
Deurontsluitfunksie werk nieIncorrect electric lock wiring; incompatible lock; power issue to lock.Verify electric lock wiring according to the diagram. Ensure the lock receives power. Confirm lock compatibility.
Poor video quality at nightObstruction to IR sensors; dirty camera lens.Clean the camera lens. Ensure no objects are blocking the IR sensors on the outdoor unit.

If these steps do not resolve the issue, please contact AMOCAM customer support for further assistance.

8. Spesifikasies

Below are the technical specifications for the AMOCAM V70C-520-3 Video Intercom System:

  • Modelnommer: V70C-520-3
  • Skermgrootte: 7 duim
  • Video-opname-resolusie: 720p
  • Fotosensortegnologie: CMOS
  • Lae lig tegnologie: Night Color (IR Night Vision)
  • Verbindingstegnologie: Bedraad
  • Kragbron: Battery Powered (for some components, main system is wired)
  • Voltage: 240 Volt
  • Wattage: 5 watt
  • Materiaal: Aluminum (outdoor unit)
  • Kleur: Wit Silwer
  • Itemafmetings (L x B x H): 14 x 11 x 4 duim
  • Item gewig: 5.7 pond
  • Montage tipe: Muurmontering
  • Internasionale Beskermingsgradering: IP65 (for outdoor unit)
  • Aantal kanale: 2-rigting interkom
  • Aanbevole gebruike: Doorbell, Indoor, Outdoor
  • Vervaardiger: AMOCAM

9. Waarborg en Ondersteuning

AMOCAM products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AMOCAM website. For technical support, troubleshooting assistance, or inquiries regarding parts and service, please contact AMOCAM customer service through the contact information provided on their webwebwerf of u aankoopdokumentasie.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.