Hype HY-BTWTR-BLK Hydro Sound Bluetooth Waterdansende Luidsprekers Gebruikershandleiding

1. Inleiding

Dankie vir die aankoopasing the Hype HY-BTWTR-BLK Hydro Sound Bluetooth Water Dancing Speakers. These speakers combine high-quality audio with a dynamic water and light show, enhancing your listening experience. This manual provides essential information for the safe and efficient operation of your new speakers.

2. Veiligheidsinligting

• Lees alle instruksies noukeurig voor gebruik.
• Moenie die luidsprekers blootstel aan uiterste temperature, direkte sonlig of hoë humiditeit nie.
• Keep the speakers away from water sources to prevent electrical shock, as they are not waterproof.
• Do not attempt to disassemble or modify the speakers. This will void the warranty and may cause damage.
• Gebruik slegs die meegeleverde laaikabel of 'n gesertifiseerde ekwivalent.
• Hou buite bereik van kinders.

3. Pakketinhoud

Kontroleer asseblief die pakket vir die volgende items:

• Hype Hydro Sound Bluetooth Water Dancing Speakers (2 units)
• USB-laaikabel
• 3.5 mm oudio kabel
• Gebruikershandleiding (hierdie dokument)

4. Produk verbyview

Familiarize yourself with the components of your Hype Water Dancing Speakers.

Beeld 1: Voorkant View of Speakers. This image displays the front of two Hype Hydro Sound Bluetooth Water Dancing Speakers. Each speaker features a clear, conical top housing the water and light elements, and a black base containing the speaker driver and control button. The water jets are visible within the clear section, ready to synchronize with audio.

Beeld 2: Agterkant View of Speaker. This image shows the rear panel of one Hype Hydro Sound Bluetooth Water Dancing Speaker. From left to right, the visible ports and controls include a 5V DC charging input, an AUX input for wired connections, and a power switch/button. These elements facilitate charging and connectivity options for the speaker.

Luidsprekerkomponente:

• Water Jet Chamber: Clear top section where water and LED lights create the dancing effect.
• Luidsprekerbestuurder: Located in the base for audio output.
• Kragknoppie: Skakel die luidsprekers aan/af.
• 5V DC-invoer: Vir die laai van die interne battery.
• AUX-invoer: For wired audio connection using the 3.5mm cable.

5. Opstelling

5.1 Laai die luidsprekers

1. Connect the small end of the USB charging cable to the 5V DC input port on the back of one speaker.
2. Koppel die groter punt van die USB-kabel aan 'n USB-kragadapter (nie ingesluit nie) of 'n rekenaar se USB-poort.
3. Die laai-aanwyserliggie (indien teenwoordig) sal tydens laai brand en afskakel wanneer dit volledig gelaai is.
4. A full charge typically takes 2-3 hours and provides approximately 5 hours of playback.

Let wel: Both speakers are powered by a single connection. Ensure both speakers are connected to each other via the integrated cable for full functionality.

5.2 Aan-/afskakel

• To power on, press and hold the Power button on the main speaker until you hear an audible prompt or see an indicator light.
• To power off, press and hold the Power button again.

6. Bedryfsinstruksies

6.1 Bluetooth -koppeling

1. Ensure the speakers are powered on and within 10 meters (33 feet) of your Bluetooth-enabled device.
2. The speakers will automatically enter pairing mode, indicated by a flashing LED light.
3. On your device (smartphone, tablet, laptop), go to the Bluetooth settings and search for available devices.
4. Select "HY-BTWTR-BLK" or a similar name from the list.
5. Once paired, you will hear a confirmation sound, and the LED light will stop flashing.
6. The speakers will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

6.2 AUX-invoerverbinding

For devices without Bluetooth or for a wired connection:

1. Connect one end of the 3.5mm audio cable to the AUX input port on the back of the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your device.
3. The speakers will automatically switch to AUX mode.

6.3 Music Playback and Water Dancing

• Once connected via Bluetooth or AUX, start playing music on your connected device.
• The water jets inside the speakers will begin to dance and light up in multiple colors, synchronizing with the beat and volume of the music.
• Adjust the volume from your connected device.

7. Onderhoud

• Skoonmaak: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use abrasive cleaners or allow water to enter any openings.
• Berging: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight.
• Batterysorg: To prolong battery life, fully charge the speakers before storing them for long periods and recharge them every 3-6 months.

8. Probleemoplossing

9. Spesifikasies

• Model: HY-BTWTR-BLK
• Tipe luidspreker: Desktop
• Verbinding: Bluetooth, 3.5 mm AUX
• Versoenbare toestelle: Skootrekenaar, slimfoon, tablet
• Kleur: Swart
• Produk gewig: 200 gram
• Waterdig: Nee
• Kragbron: Interne herlaaibare battery
• Wattage: 3 Watt
• Gemiddelde batterylewe: Tot 5 ure
• Produk afmetings: 10 x 4 x 4 cm (per speaker, approximate)

10. Waarborg en Ondersteuning

Hype products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical support, warranty claims, or further assistance, please contact Hype customer service through their official webwebwerf of die kleinhandelaar waar die produk gekoop is. Bewaar u bewys van aankoop vir waarborgvalidering.