Stayer SCE 1650 WMC Miter Saw User Manual

1. Inleiding

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Veiligheidsinstruksies

Volg altyd basiese veiligheidsmaatreëls om die risiko van brand, elektriese skok en persoonlike besering te verminder. Versuim om hierdie instruksies te volg, kan ernstige beserings veroorsaak.

• Lees alle instruksies: Familiarize yourself with the tool's controls and proper use.
• Dra oogbeskerming: Dra altyd veiligheidsbril of veiligheidsbril met syskerms.
• Dra gehoorbeskerming: Gebruik oordopjes of oorbeskermers tydens operasie.
• Veilige werkstuk: Altyd clamp of andersins die werkstuk vasmaak om beweging tydens sny te voorkom.
• Hou hande skoon: Never place hands near the cutting blade.
• Handhaaf 'n skoon werkarea: Deurmekaar areas nooi ongelukke uit.
• Moenie in plofbare atmosfeer werk nie: Moenie elektriese gereedskap gebruik in die teenwoordigheid van vlambare vloeistowwe of gasse nie.
• Ontkoppel voor verstellings: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Vermy oorreiking: Handhaaf te alle tye behoorlike voet en balans.

3. Produk verbyview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Figuur 1: verbyview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Sleutelkomponente:

• Aluminum Base and Upper Table: Provides stability and durability.
• Electronic Variator: Allows adjustment of blade speed.
• Kantelmeganisme: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Stofonttrekkingpoort: Vir die koppeling van 'n stofversamelingstelsel.

4. Opstelling

Voordat u die verstekzaag gebruik, maak seker dat dit behoorlik opgestel en vasgemaak is.

1. Uitpak: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Montering: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Blade installasie: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Stof onttrekking: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Bedryfsinstruksies

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Krag- en spoedbeheer

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Making Cuts

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Operasie: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Onderhoud

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Skoonmaak: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Bladinspeksie: Inspekteer die lem voor elke gebruik vir skerpte, krake of ontbrekende tande. Vervang dowwe of beskadigde lemme onmiddellik.
• Borselinspeksie: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Smering: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Bevestigingskontrole: Kontroleer gereeld alle moere, boute en skroewe vir styfheid. Draai enige los bevestigingsmiddels vas.

7. Probleemoplossing

This section addresses common issues you might encounter with your miter saw.

8. Spesifikasies

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Model: SCE1650WMC
• Krag: 1600 W
• Voltage: 230 Volt (WS)
• Geen laai spoed: 2500 – 4000 RPM (Giri/min)
• Bladdiameter: Ø 254 mm
• Lemboring: 30 mm
• Bladmateriaal: Tungsten Carbide (Widia TCT Z-52)
• Kragbron: Elektries met koord
• Gewig: 16.5 kg
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Waarborg

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webwebwerf vir gedetailleerde waarborgbepalings en -voorwaardes. Bewaar u bewys van aankoop vir waarborgeise.

10. Ondersteuning

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Webwebwerf: www.stayer.es (Bvample, werklike URL kan verskil)