Inleiding
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture. Please read this manual thoroughly before installation and retain it for future reference.
Belangrike veiligheidsinligting
- WAARSKUWING: Risiko van elektriese skok. Ontkoppel krag by die lont of stroombreker voor installering of diens.
- Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met alle nasionale en plaaslike elektriese kodes.
- Moenie naby brandbare materiale installeer nie.
- Maak seker dat die toebehore behoorlik geaard is.
- Moenie probeer om die toebehore te wysig nie.
- Suitable for wet locations, wall mount only.
Pakketinhoud
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- RAB Lighting LED Bullet Flood 2x12W Fixture (1)
- Monteringshardeware (skroewe, draadmoere) (1 stel)
- Handleiding (1)
Image: RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture in white finish. This image shows the two adjustable LED floodlight heads attached to a central mounting base.
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Modelnommer | SMSBULLET2X12NA |
| Kragbron | Corded Electric, 120 Volts |
| Wattage | 24 Watts (2x12W LED) |
| Lig Uitset | 1664 Lumen |
| Kleur temperatuur | 5000 Kelvin (Koel Wit) |
| Ligbrontipe | LED |
| Materiaal | Metal (Fixture), Plastic (Shade) |
| Voltooi Tipe | Wit |
| Installasie tipe | Muur gemonteer |
| Binne/buiteluggebruik | Outdoor (Suitable for wet locations) |
| Afmetings | 14.3 x 8.2 x 7.8 duim |
| Gewig | 4.99 pond |
Opstelling en installasie
Gereedskap benodig: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Voltage Tester, Ladder (if necessary).
- Skakel krag af: Locate the circuit breaker or fuse box controlling the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltage toetser.
- Berei montage-oppervlak voor: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting only.
- Monteer die armatuur: Secure the fixture's mounting base to the wall using the provided mounting hardware. Ensure a tight and stable connection.
- Draadverbindings: Connect the fixture's wires to the corresponding household electrical wires.
- Koppel die swart armatuur draad aan die swart (warm) toevoerdraad.
- Koppel die wit armatuur draad aan die wit (neutrale) toevoerdraad.
- Koppel die groen or bare copper fixture wire to the groen or bare copper (ground) supply wire.
Bevestig alle verbindings met draadmoere en elektriese band.
- Seël verbindings: Ensure all wire connections are properly insulated and tucked into the junction box.
- Finale Vergadering: Attach the fixture body to the mounting base, ensuring it is securely fastened.
- Herstel krag: Sodra die installasie voltooi is en alle verbindings veilig is, herstel die krag by die stroombreker of sekeringboks.
Bedryfsinstruksies
The RAB Lighting LED Bullet Floodlight is designed for straightforward operation.
- Krag aan/af: The fixture is controlled by the wall switch or external control device connected to its power supply.
- Aanpassing van ligkoppe: The two LED floodlight heads are independently adjustable. Loosen the adjustment screws on each head, position the light beam as desired, and then securely tighten the screws to maintain the position.
- Lig uitset: The fixture provides 1664 lumens of 5000K cool white light.
Onderhoud
Gereelde onderhoud verseker optimale werkverrigting en lang lewensduur van u vloedlig.
- Skoonmaak: Maak die buitekant van die toestel gereeld skoon met 'n sagte, damp lap. Moenie skuurmiddels of oplosmiddels gebruik nie. Maak seker dat die krag afgeskakel is voor skoonmaak.
- Inspeksie: Annually inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- LEDs: The integrated LED light sources are designed for long life (100,000 hours) and are not user-replaceable.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | Geen krag aan die armatuur nie. Los bedrading konneksie. Foutiewe skakelaar. | Gaan stroombreker / lont na. Verifieer dat alle draadverbindings stewig is (maak seker dat die krag eers afgeskakel is). Toets of vervang die skakelaar. |
| Ligte flikkerings. | Los bedrading konneksie. Onversoenbare dimmerskakelaar (indien van toepassing). | Kontroleer en beveilig alle bedradingverbindings. This fixture is not specified as dimmable; ensure it's connected to a standard ON/OFF switch. |
| Verminderde liguitset. | Dirt or debris on lens. | Clean the diffusion lens with a soft, damp lap. |
If issues persist after troubleshooting, contact RAB Lighting customer support.
Waarborg inligting
This RAB Lighting product comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official RAB Lighting webwebwerf of kontak hul kliëntediens. Bewaar u bewys van aankoop vir waarborgeise.
Kliënte ondersteuning
For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly:
- Webwebwerf: www.rablighting.com
- Telefoon: Refer to the RAB Lighting webwebwerf vir huidige kontaknommers.