Flexson FLXP1WB2021 Wall Bracket for Sonos Play:1 Speakers

Inleiding

This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.

Veiligheidsinligting

WAARSKUWING:

Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.

• Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
• Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
• Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
• Hou klein dele weg van kinders.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• 2 x Flexson Wall Brackets (FLXP1WB2021)
• Gebruikershandleiding (hierdie dokument)

Let wel: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.

Opstelling en installasie

Follow these steps to install your Flexson wall bracket:

1. Berei die monteerplek voor: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
2. Boor loodsgate: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
3. Attach Wall Bracket: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
4. Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
5. Veilige luidspreker: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
6. Kabelbestuur: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.

Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.

Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.

Bedryf en Aanpassing

Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:

• Kantel: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
• Draai: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
• Omgekeerde Montering: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.

Onderhoud

To maintain the appearance and functionality of your Flexson wall bracket:

• Clean the bracket with a soft, dry cloth.
• Vermy die gebruik van skuurmiddels of oplosmiddels, aangesien dit die afwerking kan beskadig.
• Periodically check all mounting screws to ensure they remain tight and secure.

Probleemoplossing

Spesifikasies

• Modelnommer: FLXP1WB2021
• Verenigbaarheid: Sonos Play:1 Speakers
• Materiaal: Staal
• Kleur: Swart
• Kantelverstelling: 15° downwards
• Swivel verstelling: 40° links, 40° regs
• Produk afmetings: 5.47 x 3.62 x 1.77 duim (139 x 92 x 45 mm)
• Item gewig: 7 onse (198 gram)
• Vervaardiger: FLEXSON

Waarborg en Ondersteuning

For warranty information and technical support, please refer to the official Flexson webwebwerf of kontak jou kleinhandelaar. Bewaar jou bewys van aankoop vir waarborgeise.