HMF FS-20A Elektroniese Biometriese Kluis Gebruikershandleiding

1. Inleiding

Thank you for choosing the HMF FS-20A Electronic Biometric Safe. This safe is designed to provide secure storage for your valuables using advanced fingerprint recognition technology and a robust electronic locking system. Please read this manual carefully before operating the safe to ensure proper use, optimal performance, and safety.

Bewaar hierdie handleiding vir toekomstige verwysing.

2. Veiligheidsinstruksies

• Noodsleutels: Always keep the emergency override keys in a secure location, separate from the safe itself. Never store them inside the safe.
• Batteryveiligheid: Use only the specified type and size of batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the safe will not be used for an extended period.
• Plasing: Ensure the safe is installed on a stable surface or securely mounted to a wall as instructed.
• Kinders: Keep the safe and its keys out of reach of children.
• Vog: Avoid placing the safe in areas with high humidity or direct exposure to water.

3. Pakketinhoud

Kontroleer asseblief die inhoud van die pakket om seker te maak dat alle items teenwoordig is:

• HMF FS-20A Electronic Biometric Safe
• Emergency Override Keys (2x)
• External Battery Box
• AA-batterye (4x)
• Mounting Bolts (2x)

Figuur 3.1: Included accessories for the HMF FS-20A safe, featuring an external battery box, four AA batteries, and two mounting bolts for installation.

4. Opstelling

4.1 Initial Opening

Upon receiving your safe, it will be in a locked state. To open it for the first time:

1. Locate the emergency keyhole, usually concealed behind a cover on the front panel.
2. Insert one of the provided emergency keys into the keyhole and turn it clockwise.
3. Terwyl jy die sleutel gedraai hou, draai die handvatsel om die kluisdeur oop te maak.

Figuur 4.1: The HMF FS-20A safe with its door open, revealing the internal compartment and the electronic biometric locking system on the door panel.

4.2 Battery installasie

The safe requires 4 AA batteries for its electronic system. The battery compartment is typically located on the inside of the safe door.

1. Open the safe door using the emergency key (if not already open).
2. Vind die batteryklepdeksel aan die binnekant van die deur.
3. Verwyder die deksel en plaas 4 AA-batterye, en maak seker dat die polariteit (+/-) korrek is.
4. Plaas die deksel van die batterykompartement terug.
5. You should hear a beep, indicating the safe is powered on.

4.3 Montering van die kluis

The HMF FS-20A safe can be securely mounted to a wall or floor. This provides additional security against theft. Mounting hardware is included.

1. Choose a suitable location for mounting. Ensure the surface is strong enough to support the safe's weight and contents.
2. Maak die kluisdeur oop. Vind die voorafgeboorde monteringsgate aan die agterkant of onderkant van die kluis.
3. Plaas die kluis in posisie en merk die boorpunte op die muur of vloer deur die monteringsgate.
4. Drill pilot holes at the marked locations using an appropriate drill bit for your wall/floor material.
5. Align the safe with the drilled holes and secure it using the provided mounting bolts. Tighten firmly.

Figuur 4.2: Rear panel of the HMF FS-20A safe, illustrating the two pre-drilled holes designed for secure mounting to a wall or floor surface.

5. Bedryfsinstruksies

5.1 Registrasie van vingerafdrukke

The safe allows you to register multiple fingerprints for convenient access. Refer to your specific model's internal instructions for the exact programming button location (often a small button inside the safe door near the battery compartment).

1. With the safe door open, press the internal programming button (usually a red or green button). The indicator light on the fingerprint scanner will illuminate.
2. Place the pad of the finger you wish to register firmly on the fingerprint scanner.
3. Lift your finger and repeat the scan approximately 3-5 times, slightly adjusting the angle each time, until the safe confirms successful registration (e.g., a long beep or green light).
4. To register additional fingerprints, repeat steps 1-3 for each finger.
5. Test all registered fingerprints before closing the safe door.

Figuur 5.1: A user's finger positioned on the biometric sensor of the HMF FS-20A safe, demonstrating the interaction point for fingerprint recognition.

5.2 Oopmaak met vingerafdruk

To open the safe using a registered fingerprint:

1. Place a registered finger firmly and completely on the fingerprint scanner.
2. If the fingerprint is recognized, the indicator light will turn green, and you will hear a beep. The lock mechanism will disengage.
3. Within a few seconds, rotate the handle clockwise to open the safe door.
4. If the fingerprint is not recognized, the indicator light may turn red, and you will hear an error beep. Try again, ensuring your finger is clean and properly positioned.

5.3 Opening with Emergency Key

In case of battery failure, forgotten fingerprints, or electronic malfunction, the safe can be opened using the emergency override key:

1. Locate the emergency keyhole cover on the front panel and remove it.
2. Insert the emergency key into the keyhole and turn it clockwise.
3. Terwyl jy die sleutel gedraai hou, draai die handvatsel om die kluisdeur oop te maak.
4. Once open, you can replace the batteries if needed.

6. Onderhoud

6.1 Batteryvervanging

When the batteries are low, the safe will typically indicate this with a warning light or a series of beeps during operation. Replace all 4 AA batteries promptly to ensure continuous functionality.

1. Maak die kluisdeur oop.
2. Verwyder die battery kompartement deksel.
3. Verwyder die ou batterye en gooi dit verantwoordelik weg.
4. Plaas nuwe 4 AA-batterye in en let op die korrekte polariteit.
5. Plaas die deksel van die batterykompartement terug.

Using the External Battery Box: If the internal batteries are completely depleted and you cannot open the safe with your fingerprint, connect the external battery box to the emergency power port on the safe's front panel. This will provide temporary power to open the safe, allowing you to replace the internal batteries.

6.2 Skoonmaak

Om die voorkoms en funksionaliteit van jou kluis te behou:

• Vee die buitekant af met 'n sagte, damp lap. Vermy skuurmiddels of oplosmiddels.
• Gently clean the fingerprint scanner surface with a soft, lint-free cloth to ensure optimal recognition.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

HMF products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official HMF webwebwerf. Bewaar u bewys van aankoop vir enige waarborgeise.

If you encounter issues not covered in this manual, please contact HMF customer service for assistance.