Wheelock WHST-H15

Wheelock WHST-H15 Paging Horn Instruction Manual

Model: WHST-H15

1. Inleiding

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. Veiligheidsinligting

WAARSKUWING:

  • Installasie en bedrading moet deur gekwalifiseerde personeel uitgevoer word in ooreenstemming met alle plaaslike en nasionale elektriese kodes.
  • Disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure the mounting surface can adequately support the weight of the paging horn.
  • Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
  • Use only specified voltage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig en onbeskadig is tydens uitpak:

  • Wheelock WHST-H15 Paging Horn (1 unit)
  • Adjustable Mounting Bracket (pre-attached or separate)
  • Installation Hardware (screws, washers, nuts - quantity may vary)
  • Hierdie handleiding

4. Opstelling en installering

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Wheelock WHST-H15 Paging Horn with adjustable mounting bracket

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

  1. Kies ligging: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
  2. Veilige hakie: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
  3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 Bedradingsverbindings

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

  1. Kragkeuse: Vind die voltage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltage-keuse kan die eenheid beskadig.
  2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
  3. Veilige verbindings: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. Bedryfsinstruksies

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

  1. Krag aan: Apply power to your audio amplifier or paging system.
  2. Toets oudio: Initiate a test page or audio signal through your system.
  3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. Onderhoud

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

  • Gereelde inspeksie: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
  • Skoonmaak: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
  • Omgewingsbeskerming: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. Probleemoplossing

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

ProbleemMoontlike oorsaakOplossing
Geen klankuitset nie
  • Geen krag om amplewendiger
  • Verkeerde bedrading
  • Verkeerde voltage seleksie
  • Beskadigde horing
  • Kontroleer ampverligter kragtoevoer
  • Verify all wiring connections and polarity
  • Verseker voltage selector matches system voltage
  • Contact Wheelock support if horn is damaged
Distorted or low sound
  • Verkeerde voltage seleksie
  • Amplifier output too low/high
  • Los verbindings
  • Verifieer voltage selector setting
  • Pas aan ampverligter volume
  • Kontroleer en beveilig alle bedradingverbindings
Horn not securely mounted
  • Los monteer hardeware
  • Onbehoorlike installasie
  • Tighten all screws and bolts on the mounting bracket
  • Re-evaluate mounting location and method

8. Spesifikasies

HandelsmerkWheelock
ModelWHST-H15
Kraggradering15 Watt
Voltage Versoenbaarheid25V, 70V, 100V (selectable)
MonteringVerstelbare monteerbout
OmgewingWeerbestand
KleurBeige
Produkafmetings (LxBxH)11 x 11 x 11 duim
Item gewig0.01 onse
Datum Eerste Beskikbaar21 November 2013

9. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the official Wheelock webwebwerf of kontak hul kliëntediens direk. Bewaar u aankoopbewys as bewys van aankoop.

Wheelock Customer Support: Visit Eaton's Wheelock Webwebwerf

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.