KYORITSU Digital Light Meter Model 5202

1. Inleiding

Dankie vir die aankoopasing the KYORITSU Digital Light Meter Model 5202. This device is designed for accurate measurement of illuminance in various environments. It features a separated light receiving sensor for optimal positioning, multiple measurement ranges, and a clear digital display. Please read this manual thoroughly before use to ensure safe and correct operation.

2. Veiligheidsinligting

• Do not attempt to open or modify the device, except for battery replacement as described in this manual.
• Hou die toestel weg van water, hoë humiditeit en uiterste temperature.
• Vermy om die toestel te laat val of om dit aan sterk impakte te onderwerp.
• Use only the specified battery type (9V alkaline battery).
• Gooi batterye weg volgens plaaslike regulasies.
• Ensure the sensor is clean and free from obstructions for accurate readings.

3. Produk verbyview

The KYORITSU Digital Light Meter 5202 is a compact and versatile instrument for measuring light levels. Its key features include:

• 3-Range Switching: Measures illuminance from low to high levels (200/2000/20000 lux).
• Wye meetbereik: 0.1 to 19990 Lux.
• Data hou funksie: Freezes the current measurement on the display.
• Separated Sensor: The light receiving sensor is separate from the main unit, allowing for flexible and optimal positioning during measurement, preventing interference from the user's shadow.
• Offset aanpassing: Allows for fine-tuning of readings.
• Groot LCD-skerm: Provides clear and easy-to-read digital measurements.

Figuur 1: Voorkant view of the KYORITSU Digital Light Meter 5202 with dimensions.

Figuur 2: Agter view of the KYORITSU Digital Light Meter 5202 with kickstand.

4. Opstelling

4.1 Battery installasie

The device requires one 9V alkaline battery (included). To install or replace the battery:

1. Maak seker dat die toestel afgeskakel is.
2. Vind die batterykompartement aan die agterkant van die eenheid.
3. Remove the three screws securing the bottom bracket/back cover.
4. Carefully pry open the side seams of the main unit using a small flathead screwdriver. This will reveal the internal circuit board and the battery connection.
5. Koppel die 9V-battery aan die batteryklem en let op die korrekte polariteit.
6. Place the battery into its compartment and carefully reassemble the unit, ensuring the side seams align properly before re-inserting the screws.

4.2 Sensorverbinding

The light receiving sensor is permanently attached via a cable. Ensure the cable is not damaged or kinked before use.

5. Bedryfsinstruksies

5.1 Krag aan/af

Druk die KRAG knoppie om die toestel aan of af te skakel.

5.2 Reikwydtekeuse

The device offers three measurement ranges: 200, 2000, and 20000 Lux. Select the appropriate range using the RANGE button. Start with a higher range if the light intensity is unknown to avoid over-range readings.

5.3 Neem 'n meting

1. Skakel die toestel aan.
2. Position the light receiving sensor at the point where illuminance is to be measured. Ensure the sensor surface is clean and directly facing the light source.
3. Select the appropriate measurement range.
4. Read the illuminance value displayed on the LCD screen.

5.4 Data Vashou Funksie

Druk die HOU knoppie om die huidige lesing op die skerm te vries. Druk dit weer om die houvas te laat vaar en die regstreekse meting te hervat.

5.5 Offset Adjustment

The device includes an offset adjustment feature. Refer to the detailed instructions in the full product catalog or contact customer support for advanced calibration procedures if precise offset adjustment is required.

6. Onderhoud

6.1 Skoonmaak

Wipe the device and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the sensor surface clean to ensure accurate readings.

6.2 Batteryvervanging

Replace the 9V battery when the low battery indicator appears on the display or if the device fails to power on. Follow the steps outlined in Section 4.1 Battery Installation.

6.3 Berging

When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Probleemoplossing

• Toestel skakel nie aan nie: Kontroleer die batteryinstallasie en maak seker dat die battery voldoende gelaai is. Vervang indien nodig.
• Onakkurate lesings: Ensure the sensor surface is clean and unobstructed. Verify the correct measurement range is selected. Check for any environmental factors affecting light.
• Display shows 'OL' or 'OVER': The light intensity exceeds the selected range. Switch to a higher measurement range.
• Skerm is leeg of flikker: Battery may be low or improperly installed. Replace the battery.

8. Spesifikasies

9. Waarborg en Ondersteuning

This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service, please contact your local KYORITSU distributor or refer to the official KYORITSU webwebwerf vir kontakinligting. Bewaar asseblief u bewys van aankoop vir waarborgdoeleindes.