BLACK+DECKER D988 Finishing Attachment Sander Instruction Manual

Inleiding

This manual provides essential instructions for the safe and effective use of your BLACK+DECKER D988 Finishing Attachment Sander. Please read this manual thoroughly before operating the tool and retain it for future reference.

Belangrike veiligheidsinligting

Volg altyd basiese veiligheidsmaatreëls om die risiko van brand, elektriese skok en persoonlike besering te verminder.

• Dra oogbeskerming.
• Dra gehoorbeskerming.
• Maak seker dat die werkstuk veilig is clamped.
• Hou hande weg van bewegende dele.
• Disconnect the tool from the power source before changing accessories or performing maintenance.
• Gebruik slegs aanbevole bykomstighede.

Opstelling

Image showing the BLACK+DECKER D988 Finishing Attachment Sander, a compact sanding head designed to attach to a compatible power unit.

Uitpak

Carefully remove the finishing attachment sander and all accessories from the packaging. Inspect for any damage.

Attaching to Power Unit

The D988 is an attachment. Ensure your BLACK+DECKER power unit is compatible.

1. Align the attachment with the power unit's drive shaft.
2. Push the attachment firmly onto the power unit until it clicks into place.
3. Verify the attachment is securely fastened before use.

Attaching Sanding Sheets

The D988 uses hook-and-loop sanding sheets.

1. Ensure the power unit is disconnected from the power supply.
2. Peel off the old sanding sheet if present.
3. Align the new sanding sheet with the base of the attachment, ensuring the holes (if any) match for dust extraction.
4. Press the sanding sheet firmly onto the hook-and-loop base.

Bedryfsinstruksies

Algemene werking

Connect the power unit to a suitable power source.

Hou die gereedskap stewig met albei hande vas.

Place the sanding base flat on the workpiece before starting the tool.

Move the sander slowly and evenly over the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the workpiece or tool.

For optimal results, sand with the grain of the wood.

Stofontginning

If your power unit or attachment has a dust extraction port, connect a suitable dust bag or vacuum cleaner to minimize dust exposure.

Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou gereedskap.

Skoonmaak

After each use, disconnect the tool from the power supply.

Vee die buitekant van die gereedskap af met advertensiemateriaalamp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.

Clear any dust buildup from the ventilation openings to prevent overheating.

Sanding Pad Inspection

Periodically inspect the hook-and-loop sanding pad for wear or damage. A worn pad will not hold sanding sheets effectively. Replace if necessary.

Berging

Bêre die gereedskap op 'n droë, veilige plek, buite bereik van kinders.

Probleemoplossing

Spesifikasies

• Model: D988
• Handelsmerk: SWART+DEKER
• Item gewig: 500 gram
• Maksimum rotasiespoed: 10000 rpm
• ASIN: B00IQQ92IG
• Vervaardiger: Black & Decker

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the documentation provided with your BLACK+DECKER power unit or visit the official BLACK+DECKER webwebwerf.

This attachment is covered by the standard BLACK+DECKER warranty applicable to its power tool system.