Fieldpiece SPK3 Voubare ROD Dubbele Temperatuurtermometer met 8:1 Infrarooi Pistool Gebruikershandleiding

1. Inleiding

The Fieldpiece SPK3 is a versatile dual-temperature thermometer designed for HVACR professionals. It combines a folding rod temperature probe for in-duct measurements with an 8:1 infrared (IR) gun for non-contact surface temperature readings. This device features a convenient flip display, Max/Min, Hold, and T1-T2 functions, and a robust design for field use.

Image 1.1: The Fieldpiece SPK3 thermometer, showing its folding rod probe extended and the infrared sensor. The display shows temperature readings.

2. Opstelling

2.1 Battery installasie

1. Vind die batteryklepdeksel aan die agterkant van die eenheid.
2. Use a small screwdriver or coin to open the battery compartment.
3. Insert two (2) AAA batteries, ensuring correct polarity (+/-). The batteries are included with the device.
4. Plaas die deksel van die batterykompartement terug en maak dit vas.

2.2 Aanvanklike aanskakeling

Druk die AAN/AF button to power on the device. The display will illuminate, and the thermometer will be ready for use.

3. Bedryfsinstruksies

3.1 Algemene werking

• Krag aan/af: Druk die AAN/AF knoppie om die eenheid aan of af te skakel.
• Eenheidkeuse: Druk die ° C / ° F. button to switch between Celsius and Fahrenheit temperature units.
• Agterlig: The display is backlit for visibility in low-light conditions.

3.2 Folding Rod (ROD) Mode

The folding rod probe is designed for accurate in-duct temperature measurements.

1. Deploying the Probe: Gently unfold the rod probe from the main body of the thermometer. Detents will lock the probe into various open positions, allowing for partial or full extension.
2. In-Duct Measurement: Insert the piercing tip of the rod into the ductwork. The rod hook allows the SPK3 to hang hands-free from registers or ductwork, providing stable readings.
3. Vertoonoriëntasie: The backlit display automatically flips its orientation when the unit is hung or positioned in ROD mode, ensuring readings are always upright.

3.3 Infrared (IR) Mode

The 8:1 infrared gun provides quick, non-contact surface temperature measurements.

1. Activating IR: Point the infrared sensor (located at the top of the unit) towards the target surface.
2. Meting: Druk en hou die IR button to take a reading. The temperature will be displayed on the screen. Release the button to hold the reading.
3. Afstand-tot-kol-verhouding: The 8:1 ratio means that at a distance of 8 inches, the measurement spot size is 1 inch. Ensure you are close enough to the target for accurate readings.

3.4 Gevorderde funksies

• MAX/MIN: Druk die MAX/MIN knoppie om view the maximum or minimum temperature recorded during a measurement session.
• HOU: Druk die HOU knoppie om die huidige temperatuurlesing op die skerm te vries. Druk weer om los te laat.
• T1-T2: The SPK3 can quickly calculate the temperature difference between two readings (T1-T2) using either IR or ROD mode. Refer to the on-screen prompts for specific instructions on using this function.

4. Onderhoud

4.1 Skoonmaak

To clean the SPK3, wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the infrared lens and probe tip are kept clean for accurate measurements.

4.2 Batteryvervanging

When the battery indicator appears on the display, replace the AAA batteries as described in Section 2.1.

4.3 Berging

When not in use, fold the rod probe back into the body of the thermometer for protection. Store the unit in a dry environment, away from extreme temperatures and direct sunlight.

5. Probleemoplossing

• No Display/Unit Not Turning On:
  • Kontroleer die batteryinstallasie en verseker die korrekte polariteit.
  • Vervang batterye met nuwes.
• Inaccurate Readings (ROD Probe):
  • Ensure the probe tip is clean and free from debris.
  • Allow sufficient time for the probe to stabilize to the measured temperature.
  • Verify the probe is fully inserted into the measurement area.
• Inaccurate Readings (IR Gun):
  • Ensure the IR lens is clean.
  • Maintain the correct distance-to-spot ratio (8:1).
  • Avoid measuring highly reflective surfaces, as IR thermometers may provide inaccurate readings on such materials.
• Display Not Flipping:
  • Ensure the unit is in ROD mode and positioned appropriately for the automatic flip feature to engage.

6. Spesifikasies

7. Waarborg en ondersteuning

7.1 Waarborginligting

The Fieldpiece SPK3 comes with a 1 jaar vervaardiger se waarborg vanaf die aankoopdatum. Hierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik. Bewaar asseblief u bewys van aankoop vir waarborgeise.

7.2 Kliëntediens

For technical assistance, troubleshooting, or warranty inquiries, please contact Fieldpiece customer support. Visit the official Fieldpiece webwebwerf vir kontakbesonderhede en bykomende hulpbronne.

Aanlyn hulpbronne: www.fieldpiece.com