duraflame DFH-TH-7-E Portable Ceramic Tower Electric Heater User Manual

Inleiding

This duraflame DFH-TH-7-E portable ceramic tower electric heater is designed to provide supplemental zone heating for areas up to 37.2 square meters (400 square feet). It offers multiple comfort levels, including low heat, high heat, and a fan-only mode. Key features include a digital ambient temperature display, a 24-hour digital timer, and a centrifugal blower for efficient heat distribution. Safety features include a cool-to-touch exterior and a tip-over safety switch that automatically shuts off the heater if it falls.

Belangrike veiligheidsinligting

Please read and understand all instructions before attempting to operate this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Lees alle instruksies voordat u hierdie verwarmer gebruik.
• Do not use outdoors. This heater is for indoor use only.
• Prop verwarmers altyd direk in 'n muuraansluiting/houer in. Moet nooit met 'n verlengkoord of herplaasbare kragkraan (uitlaat/kragstrook) gebruik nie.
• Hierdie verwarmer is warm wanneer dit gebruik word. Om brandwonde te vermy, moenie toelaat dat kaal vel warm oppervlaktes raak nie.
• Uiterste versigtigheid is nodig wanneer enige verwarmer deur of naby kinders of invalides gebruik word en wanneer die verwarmer ook al in werking gelaat word en sonder toesig.
• Gebruik geen verwarmer met 'n beskadigde koord of prop nie, of as die verwarmer nie funksioneer nie, laat val of beskadig is.
• Moenie koord onder die matte dra nie. Moenie koord bedek met matte, lopers of soortgelyke bedekkings nie. Rangskik koord weg van die verkeersarea en waar dit nie gestruikel sal word nie.
• Om 'n moontlike brand te voorkom, moenie luginlate of -uitlaat op enige manier blokkeer nie. Moet nie op sagte oppervlaktes, soos 'n bed, gebruik waar openinge geblokkeer kan word nie.
• Hierdie verwarmer het warm en boogvormende of vonkende dele binne. Moenie dit gebruik in areas waar petrol, verf of vlambare vloeistowwe gebruik of gestoor word nie.
• Gebruik hierdie verwarmer slegs soos beskryf in hierdie handleiding. Enige ander gebruik wat nie deur die vervaardiger aanbeveel word nie, kan brand, elektriese skok of beserings aan persone veroorsaak.
• Hierdie verwarmer is nie bedoel vir gebruik in badkamers, wasareas en soortgelyke binnenshuise plekke nie.
• Ontkoppel altyd verwarmer wanneer dit nie gebruik word nie.

Pakketinhoud

Carefully remove all components from the packaging and inspect for any damage. If any parts are missing or damaged, do not attempt to assemble or use the heater. Contact customer support for assistance.

• 1 x duraflame DFH-TH-7-E Portable Ceramic Tower Electric Heater
• 1 x Gebruikershandleiding

Opstelling

Follow these steps for initial setup of your heater:

1. Unpack the heater from its carton and remove all packaging materials.
2. Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 meters) of clearance from walls, furniture, and other objects to allow for proper airflow.
3. Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use an extension cord or power strip.

Bedryfsinstruksies

Beheerpaneel oorview

The control panel allows you to manage all functions of your heater. Refer to the image below for button identification.

The image shows the top control panel of the duraflame DFH-TH-7-E heater. It features a digital display showing '9 h' (timer) and '85 °F' (temperature). Below the display are five circular buttons: Power, Up arrow, Mode/Oscillation, Down arrow, and Oscillation/Fan. The duraflame logo is visible below the buttons.

Funksies

• Krag aan/af: Druk die Kragknoppie (⏻) om die verwarmer aan of af te skakel.
• Hitte instellings: Druk die Modusknoppie (often indicated by a fan or wave icon) to cycle through the available heat settings: Low (900W), High (1500W), and Fan Only mode.
• Temperatuuraanpassing: Gebruik die Oppyltjie (▲) en Afpyltjie (▼) buttons to set your desired room temperature. The digital display will show the set temperature.
• Timer funksie: Druk die Timer knoppie (often indicated by 'h' or a clock icon) to set the auto-off timer. You can typically set the timer for up to 24 hours. The display will show the remaining hours.
• ossillasie: Druk die Ossillasie knoppie (often indicated by a wave or rotation icon) to activate or deactivate the oscillation function, which rotates the heater to distribute warmth more evenly across the room.

Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en lang lewensduur van u verwarmer.

• Skoonmaak: Always unplug the heater from the power outlet before cleaning. Clean the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the heater's finish or internal components.
• Luginlaat/Uitlaat: Periodically vacuum the air intake and exhaust grilles to remove any accumulated dust, lint, or debris. Blocked grilles can reduce efficiency and pose a fire hazard.
• Berging: When not in use, store the heater in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.

Probleemoplossing

Indien u probleme met u verwarmer ondervind, raadpleeg die volgende algemene probleme en oplossings:

• Verwarmer skakel nie aan nie:
  • Ensure the power cord is securely plugged into a working 120V AC, 60Hz wall outlet.
  • Check if the unit has been tipped over. The tip-over safety switch will automatically shut off the heater. Place the heater upright on a level surface.
  • Verify that the room temperature is below the set temperature on the heater. If the room is warmer than the set temperature, the heater will not activate.
• Verwarmer hou onverwags op werk:
  • The overheat protection feature may have activated. Unplug the heater from the power outlet, wait approximately 10 minutes for it to cool down, and then plug it back in.
  • Ensure that the air intakes and exhausts are not blocked by furniture, curtains, or other objects. Clear any obstructions.
• No heat, but the fan is running:
  • Check if the heater is in 'Fan Only' mode. Press the Mode button to cycle through the heat settings (Low or High).
  • Increase the set temperature above the current room temperature using the Up arrow button.

Spesifikasies

Waarborg en Ondersteuning

For warranty information, technical support, or to inquire about replacement parts, please refer to the contact details provided on the product packaging or visit the official duraflame webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.