Fluke 117/323 Multimeter and Clamp Meter Combo Kit Instruction Manual

1. Inleiding

This manual provides essential information for the safe and effective use of your Fluke 117 Digital Multimeter and Fluke 323 True-RMS Clamp Meter combo kit. This kit is designed for residential and commercial electricians, offering productive and effective troubleshooting capabilities.

2. Ingesluit komponente

Your Fluke 117/323 KIT includes the following items:

Fluke 117 digitale multimeter
Fluke 323 True-RMS Clamp Meter
Toetsdrade (Rooi en Swart)
TPAK magnetiese hangband
C115 Durable Soft Carrying Case
9V Batteries (2 included, pre-installed)

Fluke 117 digitale multimeter — Figure 1: Fluke 117 Digital Multimeter. This image shows the front view of the yellow and black Fluke 117 multimeter with its display and rotary dial.

Figure 2: Fluke 323 True-RMS Clamp Meter. This image displays the yellow and black Fluke 323 clamp meter with its red clamp jaws open, showing the display and function dial.

3. Opstelling

3.1. Battery Installasie

The Fluke 117 and 323 meters come with 9V batteries pre-installed. If replacement is needed, refer to the detailed instructions in the full user manual for safe battery compartment access.

3.2. Verbinding van toetsdrade

Insert the red test lead into the VΩmA jack and the black test lead into the COM jack for voltage, resistance, and continuity measurements. For current measurements with the Fluke 117, insert the red lead into the 10A FUSED jack and the black lead into the COM jack.

3.3. TPAK Magnetic Hanging Strap Assembly

The TPAK magnetic hanging strap allows for hands-free operation. Attach the strap to the back of your multimeter by sliding it into the designated slot until it clicks securely. The magnetic end can then be used to hang the meter on metal surfaces, pipes, or electrical boxes.

Fluke 117 Multimeter in an electrical panel — Figure 3: Fluke 117 Multimeter in use. The multimeter is shown attached to an electrical panel, displaying a voltage reading, with test leads connected.

3.4. Kit verbyview Video

Video 1: Hierdie video bied 'n oorsigview of the contents included in the Fluke 117/323 combo kit, demonstrating each component and its basic function.

4. Bedryfsinstruksies

4.1. Fluke 117 Digital Multimeter

The Fluke 117 measures AC and DC voltage, as well as AC and DC amps. It features True RMS for accurate measurements on non-linear loads and low input impedance to prevent false readings due to ghost voltage. The VoltAlert™ non-contact voltage detection feature enhances safety by indicating the presence of voltage sonder direkte kontak.

4.2. Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage. It provides True RMS AC voltage and current for accurate measurements on non-linear signals. Use the clamp jaw to measure AC current by clamping it around a single conductor.

Figure 5: Hand using Fluke 323 Clamp Meter. A gloved hand is shown using the Fluke 323 clamp meter to measure current on a wire within an electrical box.

4.3. Multimeter Features Video

Video 2: This video highlights key features and functionalities of the Fluke 117 True-RMS Multimeter, including its automatic AC/DC voltage detection and non-contact voltage waarskuwing.

4.4. Klamp Meter Features Video

Video 3: This video details the features of the Fluke 323 Clamp Meter, including its one-handed operation, test lead connections, and AC current measurement capabilities.

5. Onderhoud

5.1. Skoonmaak

Wipe the meter case with a damp cloth and mild detergent. Do not use abrasives or solvents. Clean the test leads by wiping them with a damp lap.

5.2. Battery vervanging

When the battery indicator appears on the display, replace the 9V battery. To replace, open the battery compartment cover on the back of the meter using a screwdriver. Replace with new 9V alkaline batteries, ensuring correct polarity, then secure the cover.

5.3. Inspeksie van Toetsdrade

Regularly inspect test leads for damaged insulation or exposed metal. Replace damaged leads immediately to ensure safety and accurate measurements.

6. Probleemoplossing

If your Fluke 117/323 kit is not functioning as expected, consider the following:

No Display/Low Battery: Kontroleer batteryvlak. Vervang batterye indien laag.
Onakkurate lesings: Ensure test leads are properly connected and undamaged. Verify the correct function is selected on the rotary dial. For clamp meter current measurements, ensure the clamp is around a single conductor.
False Voltage Readings (Fluke 117): The low input impedance feature helps prevent ghost voltage readings. If readings are still suspect, ensure proper grounding.
Geen kontinuïteitspieptoon: Check if the continuity function is selected and test leads are making good contact.

For further assistance, refer to the detailed troubleshooting section in the comprehensive user manual or contact Fluke customer support.

7. Spesifikasies

Kenmerk	Spesifikasie
Handelsmerk	Fluke
Modelnommer	FLUKE-117/323 KIT
Kragbron	Alkaline (2 x 9V batteries included)
Item gewig	1.76 pond (800 gram)
Produk afmetings	9 x 30.48 x 3.5 duim
Tipe meting	Multimeter, Clamp Meter
Meting Akkuraatheid	0.5% + 2
Boonste temperatuurgradering	752 grade Fahrenheit
Veiligheidsgradering	UL, CSA (Canada and US), ANSI/ISA, CAN/CSA, CE, C-Tick, TUV, VDE
Gebruik	Professioneel

8. Waarborginligting

The Fluke 117/323 Kit comes with a 2 jaar waarborg on material and workmanship. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your kit or visit the official Fluke webwebwerf.

9. Kliëntediens

For technical assistance, product inquiries, or service requests, please visit the official Fluke website or contact their customer support line. Contact information can typically be found on the Fluke webwebwerf of in die dokumentasie wat saam met u produk verskaf word.

Fluke FLUKE-117/323 KIT