Antari HZ-500

Antari HZ-500 Haze Machine Instruction Manual

Model: HZ-500 | Handelsmerk: Antari

1. Inleiding

This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Antari HZ-500 Haze Machine. Please read this manual thoroughly before operating the unit to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Veiligheidsinligting

Adherence to the following safety precautions is crucial for preventing electrical shock, fire, or personal injury.

  • Elektriese veiligheid: Maak seker dat die eenheid aan 'n geaarde kragaansluiting met die korrekte volume gekoppel istage as specified on the product label. Disconnect power before performing any maintenance or refilling fluid.
  • Vloeistofgebruik: Use only Antari HZ-500 series haze fluid. Using other fluids may damage the machine and void the warranty. Do not ingest haze fluid. Keep out of reach of children.
  • Plasing: Position the machine on a stable, level surface. Ensure adequate ventilation around the unit. Do not block air vents. Maintain a safe distance from flammable materials.
  • Operasie: Do not operate the machine if it is damaged or malfunctioning. Avoid direct exposure to the haze output at close range. Do not modify the unit.
  • Temperatuur: The machine generates heat during operation. Avoid touching hot surfaces.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

  • Antari HZ-500 Haze Machine
  • Kragkoord
  • Gebruikershandleiding (hierdie dokument)
  • (Optional) Remote Control or DMX Cable (if purchased separately or included in specific bundles)

4. Produk verbyview

The Antari HZ-500 is a professional haze machine designed for continuous output and quiet operation. It features a durable flight case design for portability and protection.

Antari HZ-500 Haze Machine in open flight case

Figuur 4.1: Antari HZ-500 Haze Machine with its flight case lid open, revealing the main unit and control panel. The robust construction is visible, designed for touring and professional use.

4.1 Sleutelkomponente

  • Haze Output Nozzle: Located on the top surface, where haze is emitted.
  • Vloeistofreservoir: Internal compartment for haze fluid.
  • Fluid Level Indicator: A clear window to monitor fluid levels.
  • Beheerpaneel: Features a digital display and buttons for settings adjustment.
  • Kragtoevoer: IEC connector for the power cord.
  • DMX in/uit: XLR connectors for DMX control.
  • Afstandbeheerpoort: For connecting an optional wired remote.

5. Opstelling

5.1 Uitpak en plasing

  1. Verwyder die HZ-500 versigtig uit sy verpakking.
  2. Place the machine on a flat, stable, and heat-resistant surface.
  3. Ensure there is at least 50 cm (20 inches) of clear space around the unit for proper ventilation.
  4. Open the flight case lid to access the machine's controls and fluid reservoir.

5.2 Filling the Fluid Reservoir

  1. Vind die vloeistofreservoirdop bo-op die eenheid.
  2. Unscrew the cap and carefully pour Antari HZ-500 series haze fluid into the reservoir.
  3. Monitor the fluid level using the transparent indicator. Do not overfill. The maximum fluid level is clearly marked.
  4. Securely replace the reservoir cap.
Close-up of Antari HZ-500 fluid level indicator

Figuur 5.1: Detail of the fluid level indicator on the Antari HZ-500, showing the 'MAX FLUID LEVEL' mark and a 'Never Overfill' warning. This helps users prevent spillage and ensure correct operation.

5.3 Kragverbinding

  1. Connect the provided power cord to the power input socket on the rear of the HZ-500.
  2. Plug the other end of the power cord into a suitable grounded electrical outlet.
  3. Maak seker dat die kragskakelaar in die AF-posisie is voordat u dit aan die krag koppel.

5.4 Control Connection (Optional)

  • DMX beheer: Connect a DMX cable from your DMX controller to the DMX IN port on the HZ-500. If linking multiple DMX devices, connect from DMX OUT to the next device's DMX IN.
  • Bedrade afstandsbediening: Connect the optional wired remote control to the designated remote control port.

6. Bedryfsinstruksies

6.1 Aanskakeling en Opwarming

  1. Draai die kragskakelaar na die AAN-posisie.
  2. The machine will begin its warm-up cycle. The digital display will indicate the status.
  3. Once warmed up (typically a few minutes), the machine is ready for operation.

6.2 Beheerpaneelwerking

The HZ-500 features a user-friendly control panel for adjusting haze output and settings.

Close-up of Antari HZ-500 control panel with digital display and buttons

Figuur 6.1: Gedetailleerd view of the Antari HZ-500's control panel, featuring a digital display, function buttons, timer, volume, and interval controls, along with a direct haze mode switch. The power input and DMX ports are also visible.

  • FUNKSIE-knoppie: Navigates through various settings menus.
  • TIMER-knoppie: Activates and adjusts the haze output timer.
  • VOLUME Button: Controls the intensity or volume of haze output.
  • INTERVAL Button: Sets the delay between haze bursts when using the timer function.
  • ON/OFF Switch (Direct Haze Mode): Provides immediate haze output when switched ON, bypassing timer or DMX settings.

6.3 Haze Output

Once the machine is warmed up, you can initiate haze output using the control panel, an optional remote, or DMX control.

Antari HZ-500 Haze Machine emitting haze

Figuur 6.2: The Antari HZ-500 Haze Machine actively producing a fine, even haze, demonstrating its operational output.

6.4 Afskakel

  1. Turn off the haze output.
  2. Flip the main power switch to the OFF position.
  3. Ontkoppel die kragkabel van die elektriese aansluiting.
  4. Laat die eenheid heeltemal afkoel voordat dit geskuif of gestoor word.

7. Onderhoud

Gereelde onderhoud verseker die lang lewensduur en optimale werkverrigting van u HZ-500.

  • Skoonmaak: Periodically wipe the exterior of the machine with a soft, dry cloth. Ensure air vents are free from dust and debris.
  • Vloeistofstelsel: If the machine will be stored for an extended period, it is recommended to drain the fluid reservoir and run a small amount of distilled water through the system to prevent clogs. Consult Antari's official guidelines for detailed cleaning procedures.
  • Berging: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir cap is securely fastened.

8. Probleemoplossing

This section addresses common issues you might encounter. For problems not listed here, contact Antari customer support.

ProbleemMoontlike oorsaakOplossing
Geen waas-uitset nieNo power; fluid reservoir empty; clogged nozzle; machine not warmed up.Check power connection; refill fluid; clean nozzle (refer to maintenance); allow sufficient warm-up time.
Swak waasuitsetLow fluid level; incorrect fluid type; partial clog; low output setting.Refill fluid; ensure correct Antari HZ-500 fluid is used; clean nozzle; increase output setting on control panel.
Machine not responding to DMXVerkeerde DMX-adres; foutiewe DMX-kabel; probleem met DMX-beheerder.Verify DMX address settings on HZ-500; test DMX cable; check DMX controller functionality.

9. Spesifikasies

Technical specifications for the Antari HZ-500 Haze Machine:

  • Model: HZ-500
  • Item gewig: 74.8 pond
  • Pakket afmetings: 22.83 x 17.91 x 17.72 duim
  • Krag: 120VAC 250V/7A (for US models, check label for other regions)
  • Tipe vloeistof: Antari HZ-500 Series Haze Fluid
  • Beheer: On-board digital control, DMX, Optional Wired Remote
  • Eerste beskikbaar: 18 Oktober 2014

10. Waarborg en Ondersteuning

For warranty information, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or replacement parts, please contact your authorized Antari dealer or Antari customer service directly. Provide your product model number (HZ-500) and serial number when seeking support.

Antari Official Webwebwerf: www.antari.com

© 2023 Antari. All rights reserved. Specifications are subject to change without notice.