Belangrike veiligheidsinstruksies
Please read and save these important safety instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Ontkoppel altyd die waaier voordat u skoonmaak of diens doen.
- Moenie enige waaier met 'n beskadigde koord of prop gebruik nie.
- Keep the fan away from water and moisture.
- Maak seker dat die waaier op 'n stabiele, gelyk oppervlak geplaas word om te verhoed dat dit kantel.
- Moenie vingers of enige voorwerpe deur die rooster steek terwyl die waaier aan die gang is nie.
- This fan is for indoor use only.
Produk verbyview
The PELONIS FS40-8JR is a 16-inch oscillating pedestal fan designed to provide efficient airflow and cooling in various indoor environments. Its adjustable height and wide-angle oscillation ensure comprehensive air distribution.
Figure 1: PELONIS FS40-8JR Pedestal Fan. This image displays the complete fan assembly, highlighting its white finish, the protective grille, fan blades, central control panel, the adjustable stand with a remote control holder, and the stable round base.
Sleutel kenmerke:
- Wide-angle oscillation and tilt for broad air coverage.
- Convenient 4-hour timer function.
- Remote control with a dedicated holder for easy access.
- Adjustable height to suit different cooling needs.
- Stable round base for secure placement.
- Three-speed settings (Low, Medium, High).
Onderdele lys
Before assembly, ensure all parts are present and undamaged. Refer to the diagram in the Product Overview section for visual identification.
- Voorste rooster
- Agterrooster
- Fan Blades
- Motorbehuising
- Beheerpaneel
- Verstelbare Staanpaal
- Ronde basis
- Afstandbeheer
- Afstandsbeheerhouer
- Fasteners (nuts, screws, washers - specific types may vary)
Opstelling en samestelling
Minimal assembly is required to set up your PELONIS pedestal fan. Follow these steps carefully:
- Stel die basis bymekaar: Attach the adjustable stand pole securely to the round base using the provided fasteners. Ensure it is stable and upright.
- Attach Motor Housing: Mount the motor housing onto the top of the adjustable stand pole. Secure it firmly.
- Installeer die agterste rooster: Place the rear grille onto the motor housing, aligning it correctly.
- Mount Fan Blades: Carefully slide the fan blades onto the motor shaft. Secure them with the retaining cap or nut.
- Heg voorste rooster aan: Position the front grille over the fan blades and secure it to the rear grille using the clips or screws provided. Ensure the grille is fully closed and locked for safety.
- Plaas afstandbeheerbatterye in: Open the battery compartment on the remote control and insert 3 AAA batteries (not included), observing polarity.
- Heg afstandbeheerhouer aan: Clip the remote control holder onto the adjustable stand pole at a convenient height.
Once assembled, place the fan on a firm, level surface and plug it into a standard electrical outlet.
Bedryfsinstruksies
Your PELONIS fan can be operated using the control panel on the fan unit or the included remote control.
Beheerpaneel funksies:
- Krag aan/af: Press the "ON/OFF" button to turn the fan on or off.
- Spoedbeheer: Press the "SPEED" button repeatedly to cycle through Low (L), Medium (M), and High (H) speed settings.
- Afteller: Press the "TIMER" button to set the fan to operate for a specific duration (e.g., 1, 2, 4 hours). The fan will automatically turn off after the set time.
- ossillasie: Press the "OSC" button (if present on the panel, otherwise use remote) to activate or deactivate the oscillation function, allowing the fan head to sweep from side to side.
Afstandbeheer funksies:
The remote control provides convenient operation from a distance. Ensure the remote is pointed towards the fan's control panel for optimal response.
- Kragknoppie: Skakel die waaier aan of af.
- Spoedknoppies: Separate buttons for Low, Medium, and High speeds, or a single button to cycle through them.
- Timer-knoppie: Stel die bedryfstimer in.
- Ossilasie -knoppie: Activates or deactivates the oscillation feature.
Verstel van hoogte en kantel:
- Hoogte: Loosen the height adjustment knob on the stand pole, raise or lower the fan to the desired height, and then tighten the knob securely.
- Kantel: Gently push the fan head up or down to adjust the vertical angle of airflow.
Onderhoud en Skoonmaak
Regular cleaning and maintenance will help ensure the longevity and optimal performance of your fan.
- Ontkoppel altyd die waaier uit die kragtoevoer voor skoonmaak.
- Buitenste skoonmaak: Gebruik 'n sagte, damp lap om die buite-oppervlaktes van die waaier af te vee. Moenie skuurmiddels of oplosmiddels gebruik nie.
- Rooster skoonmaak: Dust and lint can accumulate on the grilles and blades. Periodically remove the front grille (refer to assembly instructions in reverse) to clean the fan blades and inside of the grilles with a soft cloth or vacuum cleaner. Ensure all parts are dry before reassembling.
- Berging: Wanneer dit nie vir lang tye gebruik word nie, bêre die waaier op 'n koel, droë plek, verkieslik in sy oorspronklike verpakking, om dit teen stof en skade te beskerm.
Probleemoplossing
If you experience issues with your fan, consult the following table for common problems and solutions.
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Die waaier skakel nie aan nie. | Not plugged in; Power outlet not working; Fan switch off. | Ensure fan is securely plugged into a working outlet; Check household circuit breaker; Press the power button on the fan or remote. |
| Swak lugvloei. | Waaierspoed te laag gestel; Roosters of lemme is vuil. | Increase fan speed; Clean the fan grilles and blades as per maintenance instructions. |
| Die waaier is raserig. | Loose parts; Fan not on a level surface; Obstruction. | Check for loose screws or components and tighten; Place fan on a stable, level surface; Ensure nothing is obstructing the fan blades. |
| Afstandbeheer werk nie. | Batteries are dead or incorrectly inserted; Obstruction between remote and fan. | Replace batteries (3 AAA); Ensure correct polarity; Remove any obstructions and point remote directly at the fan's control panel. |
Spesifikasies
| Eienskap | Detail |
|---|---|
| Modelnommer | FS40-8JR |
| Handelsmerk | PELONIS |
| Fan Tipe | Voetstukventilator |
| Fan Grootte | 16 duim |
| Aantal snelhede | 3 (Laag, Medium, Hoog) |
| Spesiale kenmerke | Oscillating, Adjustable Height, Timer, Remote Control |
| Afteller | Tot 4 uur |
| Kragbron | Elektries met koord |
| Wattage | 60 watt |
| Kleur | Wit |
| Item gewig | 8.16 pond (ongeveer 3.7 kg) |
| Produkafmetings (L x B x H) | 57.71 x 11.99 x 46.41 cm |
| Vergadering benodig | Minimale Vergadering |
| Batterye vir afstandbeheer | 3 x AAA (nie ingesluit nie) |
Waarborg en Ondersteuning
For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. You may also contact customer service for assistance with product operation, parts, or troubleshooting beyond this manual.
Kliëntediens kontak: Verwys asseblief na die kontakbesonderhede wat op die produkverpakking verskaf word of na die vervaardiger se amptelike webwebwerf.