Elektrobock PT32 GST Digital Room Thermostat with GSM Module User Manual

1. Inleiding

Thank you for choosing the Elektrobock PT32 GST Digital Room Thermostat. This device is designed to provide precise and efficient control over your heating or cooling system, with the added convenience of remote management via GSM. This manual will guide you through the installation, setup, and operation of your new thermostat. Please read these instructions carefully before use and retain them for future reference.

2. Veiligheidsinligting

• Installation should only be performed by a qualified electrician in accordance with local regulations.
• Always disconnect power to the heating/cooling system before installing or servicing the thermostat.
• Moenie die toestel blootstel aan vog, uiterste temperature of direkte sonlig nie.
• Ensure the power supply specifications match those required by the thermostat (5V DC, 2.5A).
• Hou buite bereik van kinders.

3. Pakketinhoud

Kontroleer asseblief dat alle items in u pakket teenwoordig is:

• Elektrobock PT32 GST Digital Room Thermostat
• Power Adapter (5V DC, 2.5A, Jack type)
• Gebruikershandleiding (hierdie dokument)
• Note: 2x AA 1.5V batteries for clock backup are not included and must be purchased separately.

4. Produk verbyview

The PT32 GST thermostat features a large, clear backlit display and intuitive controls. It is equipped with a GSM module for remote control via SMS messages.

4.1. Voorkant View en afmetings

Figuur 1: Voorkant view of the Elektrobock PT32 GST thermostat, showing the display, control dial, and buttons, along with its dimensions: 14 cm (width), 9 cm (height), and 3 cm (depth).

4.2. Agter View en verbindings

Figuur 2: Agter view of the Elektrobock PT32 GST thermostat, illustrating the mounting holes and terminal block for electrical connections.

4.3. Sy View

Figuur 3: Regterkant view of the Elektrobock PT32 GST thermostat, highlighting its slim design and the external GSM antenna.

5. Opstelling en installering

5.1. Montering van die termostaat

1. Choose an appropriate location on an interior wall, away from direct sunlight, drafts, and heat sources.
2. Ensure the mounting height is approximately 1.5 meters (5 feet) from the floor for optimal temperature sensing.
3. Use the mounting holes on the back of the thermostat (refer to Figure 2) to mark and drill holes in the wall.
4. Secure the thermostat base to the wall using appropriate screws and wall plugs.

5.2. Elektriese bedrading

WAARSKUWING: Disconnect power to your heating/cooling system at the main circuit breaker before proceeding with wiring.

1. Connect the thermostat to your heating/cooling system using the dry contact output terminals (max. 5A / 250V AC). Refer to your heating/cooling system's manual for specific wiring diagrams.
2. Connect the provided 5V DC, 2.5A power adapter to the thermostat's power input jack.
3. Insert 2x AA 1.5V batteries (not included) into the battery compartment for clock backup in case of power failure.
4. Once all connections are secure, restore power to the system.

5.3. Aanvanklike konfigurasie

1. Taalkeuse: Upon first power-up, the thermostat will prompt you to select a language (CZ / PL / EN / DE / RU / SVK). Use the control dial to navigate and confirm your choice.
2. Datum en Tyd: Set the current date and time. The device supports automatic summer/winter time changes.
3. GSM Module Setup: Insert a valid SIM card (not included) into the designated slot. Follow the on-screen instructions to configure the GSM module for remote SMS control.
4. Bedryfsmodus: Select either heating or cooling mode depending on your system.

6. Bedryfsinstruksies

6.1. Basiese werking

• Vertoon: The large backlit LCD shows the current temperature, time, date, operating mode, and GSM signal strength.
• Beheer dialoog: Use the central dial to navigate menus and adjust settings. Press the dial to confirm selections.
• MENU/ESC Button: Press to access the main menu or to exit a menu/setting without saving changes.

6.2. Programming Weekly Schedules

The PT32 GST allows for 9 weekly programs, with up to 6 temperature changes per day. Programming can be set for individual days, Monday-Friday, Saturday-Sunday, or Monday-Sunday.

1. Druk die SPYSKAART knoppie om die hoofkieslys te betree.
2. Navigate to "Program Settings" and press the dial to select.
3. Choose the day(s) or day group you wish to program.
4. Set the desired temperature and time for each of the 6 available time slots. Programming resolution is 10 minutes and 0.5°C.
5. Save your changes before exiting.

6.3. Gevorderde beheerfunksies

• PID-beheer: The thermostat features advanced PID (Proportional-Integral-Derivative) control for precise temperature regulation, minimizing overshoot and maintaining stable temperatures. You can also select Hysteresis or PI control modes.
• Short-Term Temperature Change: Temporarily adjust the temperature without altering the programmed schedule. The thermostat will revert to the schedule at the next programmed event.
• Manual Mode (MANU): Set a constant temperature that overrides the weekly program until manual mode is deactivated.
• Permanent UIT: Turn off the heating/cooling system indefinitely.
• Vakansiemodus: Set a specific temperature for a defined period (e.g., during vacation) to save energy.
• Eksterne sensor: The thermostat supports connection of an external temperature sensor for specialized applications.

6.4. Remote Control via GSM

With a properly configured SIM card, you can control your thermostat remotely by sending SMS messages.

• Temperatuurverandering: Send an SMS with a specific command to adjust the set temperature.
• System ON/OFF: Send an SMS to turn the heating/cooling system on or off.
• Refer to the detailed GSM command list in the full product manual (if available) or on the manufacturer's website for specific SMS commands.

7. Onderhoud

• Skoonmaak: Wipe the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery vervanging: Replace the AA backup batteries annually or when the low battery indicator appears on the display.
• Boiler Maintenance Display: The thermostat may display an automatic boiler maintenance reminder. Consult your boiler's manual or a qualified technician for maintenance.
• Sagteware-opdaterings: Check the Elektrobock website periodically for any available firmware updates for your device.

8. Probleemoplossing

If you encounter problems not listed here, please contact Elektrobock customer support.

9. Spesifikasies

10. Waarborginligting

Elektrobock products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Elektrobock webwebwerf vir gedetailleerde waarborgbepalings en -voorwaardes spesifiek vir u streek. Die waarborg dek tipies defekte in materiale en vakmanskap onder normale gebruik.

Note: Damage caused by improper installation, misuse, unauthorized modifications, or natural disasters is not covered under warranty.

11. Ondersteuning en Kontak

For technical assistance, troubleshooting, or general inquiries regarding your Elektrobock PT32 GST thermostat, please contact Elektrobock customer support.

• Webwebwerf: Visit the official Elektrobock webwebwerf vir algemene vrae, opgedateerde handleidings en kontakbesonderhede.
• E-pos/Telefoon: Specific contact details can usually be found on the manufacturer's webwebwerf of in die produkverpakking.

When contacting support, please have your product model number (PT32 GST) and purchase information ready.