WAC Lighting TK-103LED Line Voltage-spoorkop-instruksiehandleiding

1. Inleiding

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting TK-103LED Line Voltage Track Head with 8W GU10 LED Bulb. Please read all instructions carefully before installation and retain this manual for future reference. This product is designed for indoor use only.

2. Veiligheidsinligting

WAARSKUWING: To reduce the risk of fire, electric shock, or injury to persons, please observe the following:

• Maak seker dat die krag by die stroombreker afgeskakel is voor installasie of onderhoud.
• Alle elektriese verbindings moet in ooreenstemming wees met plaaslike kodes, verordeninge of die Nasionale Elektriese Kode (NEC). Raadpleeg 'n gekwalifiseerde elektrisiën as u nie vertroud is met behoorlike elektriese bedradingsverbindings nie.
• Moenie hierdie toebehore in nat of droë toestand installeer nie.amp liggings. Hierdie produk is slegs vir droë liggings gegradeer.
• Do not attempt to alter or modify the fixture. Any alterations may void the warranty and create a safety hazard.
• Proposisie 65 Waarskuwing: Hierdie produk kan chemikalieë bevat wat in die staat Kalifornië bekend is om kanker en geboortedefekte of ander voortplantingskade te veroorsaak.

3. Produk verbyview

The WAC Lighting TK-103LED is a line voltage track head designed for use with 120V track systems. It features a durable formed metal construction with a polycarbonate track adaptor and includes an 8W GU10 LED bulb. The fixture offers versatile aiming with 350-degree horizontal rotation and 90-degree vertical tilt, allowing for precise light direction.

Figuur 1: Produkafmetings
This diagram illustrates the dimensions of the WAC Lighting TK-103LED track head. The fixture measures approximately 4 11/16 inches in height when pointed downwards, and 5 7/16 inches when angled. The base width is 3 1/16 inches. The track adapter section is 1 3/8 inches wide and 1 1/8 inches high. The light head itself is 2 5/8 inches deep.

4. Opstelling en Installasie

This track head is designed for ceiling mount installation on 120V track systems. It is compatible with H, J/J2, and L track configurations. Ensure you have the correct track type for your installation.

4.1 Komponente Ingesluit

• Track fixture (with pre-installed 8W GU10 LED bulb)
• Installasie-instruksies

4.2 Installasiestappe

1. Skakel krag af: Before beginning installation, ensure the power to the track system is completely OFF at the circuit breaker.
2. Identifiseer Spoortipe: Verify your track system is a 120V H, J/J2, or L type track. The track head adaptor is designed to fit these specific types.
3. Voeg spoorkop in: Align the track head adaptor with the track slot. Push the adaptor firmly into the track and twist it to lock it into place. Ensure the electrical contacts on the adaptor engage properly with the track conductors.
4. Veilige toebehore: Tighten any aiming screws or locking mechanisms on the track adaptor to secure the fixture's position on the track.
5. Herstel krag: Sodra die toebehore stewig geïnstalleer is, herstel die krag by die stroombreker.

5. Operasie

5.1 Aiming the Light

The TK-103LED track head allows for flexible light direction. You can rotate the fixture 350 degrees horizontally and tilt it 90 degrees vertically to illuminate your desired area. Loosen the aiming screws slightly, adjust the fixture, and then re-tighten the screws to secure its position.

5.2 Verduistering

This fixture is designed for smooth and continuous dimming from 100% down to 1% when used with an electronic low voltage (ELV) dimmer. For optimal performance and to avoid flickering, ensure your dimmer switch is compatible with LED lighting and specifically with ELV dimming protocols.

6. Onderhoud

6.1 Skoonmaak

To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.

6.2 Re-Lamping (Bulb Replacement)

The TK-103LED track head uses a GU10 LED bulb. While the included LED bulb has a long lifespan, it can be replaced if necessary. The fixture is designed for easy re-lamping from the front without the use of tools. To replace the bulb:

1. Skakel die krag na die toebehore by die stroombreker af.
2. Carefully grasp the decorative glass shade or the bulb itself and twist counter-clockwise to remove the GU10 bulb.
3. Insert a new GU10 LED bulb by aligning the pins with the socket holes and twisting clockwise until secure.
4. Herstel krag na die toebehore.

7. Probleemoplossing

8. Spesifikasies

• Handelsmerk: WAC beligting
• Modelnommer: LTK-103LED-BK
• Kleur: Swart
• Materiaal: Aluminum (fixture), Glass (shade)
• Styl: L Track (compatible with H, J/J2 track types)
• Spesifieke gebruike: Slegs binnenshuise gebruik
• Kragbron: AC
• Ligbron: LED
• Aantal ligbronne: 1
• Voltage: 120 Volt
• Wattage: 8 watt
• Gloeilamp basis: GU10
• Skakelaar tipe: Dimmer compatible (ELV LED)
• Helderheid: 470 Lumen
• Montage tipe: Plafon Mount
• Itemafmetings (L x B x H): 2.63" x 3.63" x 5.44" (Note: Height varies with aiming, refer to Figure 1 for detailed dimensions)
• Item gewig: 4.32 onse
• UPC: 790576225050

9. Waarborg en ondersteuning

9.1 Vervaardigerwaarborg

WAC Lighting provides a warranty for this product: 5 years for functional components and 2 years for the finish. Please retain your proof of purchase for warranty claims.

9.2 Kliëntediens

For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. Refer to the WAC Lighting webwebwerf of produkverpakking vir huidige kontakinligting.